Innovación en Ingeniería y ciencias tecnológ...

1 2 3 4 5 ... 8

O-1154University of Louisiana at Lafayette / Estados Unidos 475

Solicitar información>> Compartir tecnología>>
Nanoestructuras Magnéticas dendríticas y método para fabricarlas

Nanorods, dendritic, magnetic nanostructures, nanoparticle, Nanostructures, Nanowires, nanotubes, nanomanufacturing, electrochemistry, chemical vapor deposition, supercapacitors, chemical, Chemistry
- Descripción de la oferta tecnológica :
  
  Descripción de las nanoestructuras magnéticas compuestas por un conjunto de "nanorods" magnéticos unidos por fuerzas dipolo en un patrón dendrítico y su método de fabricación. Las nanoestructuras magnéticas dendríticas se preparan a temperatura ambiente mediante la aplicación de un campo magnético a un sistema micelar inverso en el que al menos una sal de un metal magnético se precipitó dentro del núcleo de la micela inversa. Este método de fabricación ofrece ventajas técnicas signfifcantes respecto los sistemas existentes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Quasi one-dimentional magnetic nanostructures, such as nanorods, nanowires, and nanotubes have attracted significant scientific and technological interest because they exhibit unique magnetic properties not displayed by their bulk or nanoparticle counterparts. A variety of methods have been proposed for synthesizing various types of nanorods. And, while these methods have yielded varying degrees of success, they all are faced with the same common problems associated with chemical and physical processes, such as high cost, aggregation and coarsening of particles at elevated temperatures, and shape control, all of which limits their applications. We present here a novel fabrication method based on the reverse micelle method to produce magnetic nanorods of a dendritic fashion in repose to an applied magnetic field at room temperature. This technology offers an efficient, cost-effective method of nanostructure fabrication, and also for magnetic nanostructres having unique morphologies, that hold great potential for reducing costs of nanostructure manufacturers. Leer más
O-1155University of Louisiana at Lafayette / Estados Unidos 652

Solicitar información>> Compartir tecnología>>
Nanoestructuras de ultra alta densidad de almacenamiento de medios

FeRh, FePt, recording, recording media, magnetic recordings, Storage, storage media, magnetic storage, Nanostructure, hardware, Electronics, computer science, nanoparticles
- Descripción de la oferta tecnológica :
  
  En el calor de grabación magnética asistida (HAMR), partículas compuestas FeRh-FePt se utilizan ampliamente para aumentar la estabilidad térmica y superar las limitaciones de campo de escritura en grabaciones tanto longitudinales y perpendiculares magnética. Las nanopartículas esféricas ofrecen medios magnéticamente isotrópicos con ventajas funcionales respecto las partículas convencionales. Por lo tanto, la síntesis de nanopartículas esféricas compuestas de FeRh-FePt ofrecen un gran potencial para aumentar la estabilidad de los medios de almacenamiento magnético y función. Esta oferta tecnológica incluye métodos y procesos para la fabricación de Ferh / FePt nanoestructuras núcleo-envuelta y su uso como un medio de almacenamiento de ultra-alta densidad.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  In HAMR, both the coercivity and saturation magnetization of FePt are lowered during the heating process.However, the lowering of saturation magnetization of FePt reduces the thermal stability of the FePt media and therefore the ability of the FePt media to maintain written data over time. By magnetically coupling FePt with FeRh, the saturation magnetization of the FeRh--FePt system is increased over that of FePt alone, resulting in an increase in the thermal stability of the magnetic recording media and solving the write-ability problem.Therefore the synthesis of FeRh and the magnetic coupling of with FePt overcomes the write field limitations in both longitudinal and perpendicular magnetic recordings. This current technology offering includes methods and processes for making uniformly spherical FeRh/FePt core shell nanostructures and their demonstrated use as an ultra-high density storage media. This technology has significant potential as a ultra-high density storage media. Leer más
O-1156University of Louisiana at Lafayette / Estados Unidos 530

Solicitar información>> Compartir tecnología>>
Bajo consumo de energía, flip-flop de alto rendimiento con un solo transistor registrado

transistor, flip, flop circuit, clocked
- Descripción de la oferta tecnológica :
  
  Los transistores de velocidad de reloj dentro de un flip-flop tienen actividad interruptor 100% y presentan una gran carga en la red de distribución de reloj. Si se puede reducir el número de transistores velocidad de reloj en un flip-flop, el árbol de reloj tendrá menos capacidad de carga y por lo tanto se reducirá la potencia consumida en la red de reloj. Esta invención proporciona una potencia, el rendimiento del circuito flip-flop bajo alta usando sólo un transistor de velocidad de reloj.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Power consumption is a major concern in modern processors. Processor clock systems, consisting of flip-flops and latches, consume a large amount of power in modern processors. If one can reduce the number of clocked transistors in a flip-flop, the clock tree will have less capacity load and hence reduce the power consumed in the clock network. This will further result in reducing the number and size of the clock driving buffers, which will in turn cause a significant reduction in the power consumption of the overall system. We have invented a single-transistor-clocked flip-flop that enables minimizing of redundant switching activity, reduction of glitches at the output node, and less power consumption than current flip-flop devices. Collectively, this technology provides a low power, high performance flip-flop circuit with significant potential to increase circuit and overall system reliability, efficiency and speed. Leer más
O-1159University of Louisiana at Lafayette / Estados Unidos 482

Solicitar información>> Compartir tecnología>>
Microcontrolador para leer / escribir datos

Smart card, card, controller, read, write, magnetic strips
- Descripción de la oferta tecnológica :
  
  Microcontrolador para leer / escribir datos de / a una pluralidad de pistas contenidas en la tarjeta magnética. El dispositivo microcontrolador incluye un puerto de entrada de captura para almacenar los datos leídos de la tarjeta. Esta invención integra todo el sistema de lectura / escritura - el diseño del controlador, los pasos para procesar la señal, y la escritura de las rayas - en un solo chip que cuentas para variar deslizar velocidad con el tiempo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This novel invention takes advantage of the development in integrated circuits microcontrollers, and the development in hard disk technology namely magnetoresistive read heads. A debit card read/write controller. The controller comprises a microcontroller device, a read only memory, a dynamically random access memory and a read/write head for reading and writing onto a magnetic card media contained on a magnetic striped card. The microcontroller device includes an input capture port for storing data read from the card, and wherein the microcontroller device continually poles the input capture port for an event to occur. This invention integrates the entire read/write system - the controller design, the steps for processing the signal, and writing to the stripes - into one single chip that accounts for varying swipe-speed with time Leer más

Proveedor de innovación destacado IK4-IKERLAN

Sobre IK4-IKERLAN

Portafolio de tecnologías

Política de open innovation

O-1175Syncoda Technologies / Estados Unidos 220

Solicitar información>> Compartir tecnología>>
Una cartera de más de 200 patentes / solicitudes de todo el mundo que cubren la tarjeta SIM basado en tecnologías 2.4 GHz inalámbricos móviles de pago que permiten monedero addon capacidad de los teléfonos celulares convencionales

Mobile payment; wireless communications; smart phones; cell phones; 2.4 GHz; NFC; near field.
- Descripción de la oferta tecnológica :
  
  Pioneer de alta frecuencia (por ejemplo, 2,4 GHz) Tecnología pago móvil. Más rápido, más seguro que otras tecnologías (por ejemplo, NFC). SIM-Card base. Completa cartera de patentes de licencia / venta. Completar la transferencia de tecnologia. Cooperación conjunta para producción. Bajo coste: unos pocos dólares para reemplazar la tarjeta SIM. Paquete completo que incluye más de 200 patentes en todo el mundo / Aplicaciones dirigidas a esta tecnología.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  -Plug-and-play technologies (e.g., SIM-Card-Based Mobile Payment Add-On Capabilities)
  -Instead of getting a new phone with mobile payment capability, users can simply replace a SIM card, or plug in an add-on card, to add such capability to existing mobile phones
  -Fast Deployment on the user side: only need to replace the SIM card or add a sticker to the SIM card;
  -Fast Deployment on the POS side: no need to change the billing system; does not affect other applications
  -Achieving Range Control with Magnetic Field
  -Fast Data Flow with RF (e.g., 2.4 GHz)
  -Extra Layer of Security
  Leer más
O-1185CELEROMICS TECHNOLOGIES, SRL / España 360

Solicitar información>> Compartir tecnología>>
Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology
- Descripción de la oferta tecnológica :
  
  Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc No es desechable ni requiere mantenimiento, no hay necesidad de matar a las células para llevar a cabo su recuento, reducción de la manipulación de células y se elimina la contaminación de células.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our systems plug to any laboratory microscope.
  
  It is able to count from 1 to 1000 microns in particles analyzed with a single device.
  No need for disposable material or reagents : savings 500-2000 EUR /year.
  It is able to count inside the bioreactor : no need to open the container / sacrifize the culture to perform the count. Leer más
O-848UATEC - Technology Transfer Office of University of Aveiro / Portugal 1246

Solicitar información>> Compartir tecnología>>
Dosímetro centelleante de fibra óptica

Dosimetry, radiotherapy, cancer, optical fiber, security, hospitals, clinics, medical equipment
- Descripción de la oferta tecnológica :
  
  Un grupo de investigadores de la Universidad de Aveiro ha desarrollado un dosímetro para baja energía y bajas dosis. La invención tiene como objetivo monitorizar los niveles de dosis, aplicables al campo de la física nuclear y física médica, particularmente en radioterapia. Este dispositivo tiene también aplicación en el control de dosis y en el seguimiento en los sistemas de imágenes basados en la radiación ionizante y en el control y seguimiento industrial
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The invention aims to monitor the dose levels, applicable to the field of nuclear physics and medical physics, particularly in radiotherapy. This device has also application in the dose control and monitoring in imaging systems based on ionizing radiation and in industrial control and monitoring.The advantages of this technology in relation to existing technologies, include the fact that it allows the application in brachytherapy modalities for which other devices are not sensitive enough or do not meet the requirements for in-vivo and real time dosimetry. Leer más
O-1160University of Louisiana at Lafayette / Estados Unidos 951

Solicitar información>> Compartir tecnología>>
Método para la preparación de temperatura ambiente de Titania nanoesferas magnéticas recubiertas y otros Nanoestructuras

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal
- Descripción de la oferta tecnológica :
  
  El dióxido de titanio (óxido de titanio) es uno de los productos químicos más demandados del mundo debido a su alta versatilidad de uso. Investigadores de la Universidad de Louisiana en Lafayette han desarrollado un método para la preparación de compuestos, nanoesferas compuestas de un núcleo de ferrita de níquel y que tiene una cáscara de dióxido de titanio (óxido de titanio) con actividad fotocatalítica y germicida. Esta tecnología utiliza una metodología química micela inversa patentada que no requiere maquinaria cara o temperaturas elevadas. (Ref. US7504130, US7964013, US8197890, US7635518).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Permits 100% titania availability and minimizes nonavailable, internal titania waste (in contrast to mixed
  titania / ferrite composites);
  • Modified reverse micelle chemistry is performed at room temperature and without the need for
  expensive machinery;
  • Permits removal of titania nanoparticles from liquid solutions and environmental sources (a current EPA concern) via magnetic manipulation;
  • Demonstrated germicidal and photocatalytic coating for industrialand biomedical uses;
  • Reusable means of decontamination, chemical reduction (N2 & CO2) and catalysis;
  • Other preferred applications of this technology include custom shaped magnetic nanorods
  (US8197890, US7635518) and nanospheres for ultrahighdensity storage media (US7964013). Leer más

Proveedor de innovación destacado University of Almeria

Sobre University of Almeria

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Almeria

O-1171University of Burgos / España 696

Solicitar información>> Compartir tecnología>>
Poliamidas aromáticas (aramidas) reticuladas

Aramid, aromatic polyamides, high performance fibers, crosslinked fibers, crosslinked aramids
- Descripción de la oferta tecnológica :
  
  Los nuevos polímeros reticulados de aramida han demostrado propiedades mejoradas, en particular, de aislamiento eléctrico, térmicas, de estabilidad, y/o mecánicas mientras que mantienen la facilidad de procesamiento. Además, las propiedades que muestran las nuevas aramidas reticuladas hacen que el producto sea especialmente adecuado para aplicaciones tecnológicas avanzadas. La reticulación se puede llevar a cabo en los procesos industriales actuales de producción de fibra de aramida.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Crosslinking of aramid fibers by conventional production technologies (wet, dry, and dry-jet wet spinning). The crosslinking of armid fibers will render materials with even higher fire, mechanical and electrical-isolation performance. Leer más
O-1176Institute of Chemical Research of Catalonia (ICIQ) / España 1

Solicitar información>> Compartir tecnología>>
Reciclaje de dióxido de carbono: un proceso de alta rendimiento para la preparación de metanol y DME a partir de dióxido de carbono

engineering, energy, catalysis, dimethyl ether, Carbon Dioxide, methanol
- Descripción de la oferta tecnológica :
  
  Un conocido instituto de investigación química y catálisis español ha desarrollado un proceso de flujo continuo para la reducción de dióxido de carbono a metanol que procede con excelentes conversiones y selectividad en una sola pasada a través del reactor, que permite lograr rendimientos máximos de producción de metanol. El metanol obtenido puede ser procesado para DME y los hidrocarburos para producir productos químicos de alto valor.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Global warming is largely associated to the presence of greenhouse gases such as carbon dioxide in the atmosphere. This, along with the reached peak oil and the fast increasing demand in energy, places our societies in front of the urge of finding sustainable solutions for the generation of energy and chemical feedstocks. It was proposed in the 1990s that methanol could efficiently replace fossil fuels as a means to store, distribute and supply energy. Methanol can serve as a raw material for the preparation of chemical feedstocks and is also a good fuel itself; so is dimethylether. Methanol is currently being produced from synthesis gas, directly obtained from gas or biomass.
  
  A much more sustainable approach to methanol synthesis consists in capturing carbon dioxide from atmosphere or from burning plants and treat it with hydrogen to form methanol, thereby closing the carbon cycle. Such processes have been reported and they most commonly suffer from low selectivity to methanol and/or conversion of carbon dioxide to methanol, therefore requiring sofisticated process plants with high associated operating costs.
  
  The developed process allows for the preparation of methanol and DME from carbon dioxide in high yields using well-known catalysts.
  
  The Institution is searching for industrial partners to further develop these technologies from the laboratory scale to the commercial plant, jointly or independently.
  
  - The process employs commercially available catalysts
  - High productivity of methanol per gram of catalyst per hour
  - no recycling of unreacted carbon dioxide is virtually needed
  - high per-pass conversion of carbon dioxide and selectivity to methanol or dimethylether
  - further methanol processing is possible Leer más
O-1142Draco Systems / España 1170

Solicitar información>> Compartir tecnología>>
A wireless camera solution foTiny Wi-FI HD camera access point: a number of new applications like medical instrumentation, sport devices, security and industrial imaging

Wi-FI HD camera, HD camera, camera, medical instrumentation, sport devices, security, industrial imaging, imaging, video processing, dentist
- Descripción de la oferta tecnológica :
  
  A new small form factor wireless HD color camera with low latency H.264 streaming, hall effect sensor for power on and inductive battery charger has been developed. A wireless camera solution for a number of new applications like medical instrumentation, sport devices, security and industrial imaging.
  
  The company is willing to collaborate with companies from specs definition, design, development and prototype phases to pilot test, integration and manufacturing. Licensing or manufacturing or commercial (Subcontracting & Co-contracting) with Technical Assistance Agreement with companies is sought.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  DRACO SYSTEMS specialized in made-to-measure solutions in image and video processing as well as in systems and sensor control, located in Barcelona, Spain, has developed a wireless camera solution for a number of new applications like medical instrumentation, sport devices, security and industrial imaging.
  
  The camera architecture is based on an ARM9, a hardware video coprocessor, and a Wi-Fi module working at 2.4 & 5 GHz (802.11 a/b/g/n). Furthermore, it contains a 5Mpixel CMOS color sensor, a SDHC card for video recording, and Bluetooth. It is a low power consumption (<3W) device and has an autonomy for 5/6 hours in a compact 40x40x20mm size.
  
  The camera is adaptable to each technology needs. Thanks to its access point capability, its size and its weight, is able to send HD live stream towards mobile phone, tablet or laptop devices where it could be visualized using an standard player such as Mplayer.
  Leer más
O-1165University of Burgos / España 4

Solicitar información>> Compartir tecnología>>
Optimización y racionalización de las rutas de transporte escolar

traffic, schools, school, School Transport
- Descripción de la oferta tecnológica :
  
  Programa informático que ayuda al diseño de las rutas de los vehículos que realizan el transporte de alumnos de sus localidades de origen a los centros escolares correspondientes y viceversa. El sistema, fácilmente manejable por el usuario, ayuda a obtener rutas más económicas, cómodas, seguras y cortas.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Using pseudo-optimal algorithms and optimal ad-hoc adapted to this kind of problems
  - Integration of them in Geographic Information Systems to display more comfortably locations (villages, schools, etc..), Roads and routes learned
  - Consideration of several targets simultaneously
  etc.). Leer más

Proveedor de innovación destacado University of Lleida

Sobre University of Lleida

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Lleida

O-611AIR PRODUCTS AND CHEMICALS / Estados Unidos 1927

Solicitar información>> Compartir tecnología>>
Material y proceso para aumentar la "Oxygen Concentrator Purity"

Oxygen concentrator, MEDICAL, Oxygen purity, PSA process, Zeolite material
- Descripción de la oferta tecnológica :
  
  Air Products ofrece para licencia un "crystalline silver-exchanged lithium-X zeolite material" y "associated Pressure Swing Adsorption (PSA) process" que permiten la producción de oxígeno gaseoso a mas del 99% de pureza. Mediante la eliminación selectiva de argón es posible la producción de oxígeno de alta pureza, un desafío con el que se enfrentan los diseñadores y proveedores de "medical oxygen concentrator technology"
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Crystalline zeolites in oxygen concentrators have differential selectivity with respect to the gaseous components of air, making it possible to remove nitrogen, argon and other trace elements from the feed air to the PSA process. Current oxygen concentrator technologies utilize NaX, CaX or LiX zeolites to selectively remove nitrogen from feed air in the PSA process. With such adsorbents, oxygen product purity is limited to nominally 95% because argon is not removed and concentrates in the product gas.
  
  The Air Products’ pressure swing adsorption process and silver-exchanged lithium-x zeolite combine to enable the selective, initial adsorption of nitrogen over oxygen and argon and subsequently, the selective adsorption of argon over oxygen. Leer más
O-1048University Pablo de Olavide / España 852

Solicitar información>> Compartir tecnología>>
Nuevo dispositivo educativo para el desarrollo de la creatividad motriz

An Educational Device, Motor Creativity, Sport, balls, Frisbees, ringos, indiacas
- Descripción de la oferta tecnológica :
  
  Este es un dispositivo diseñado exclusivamente para mejorar el desarrollo de la creatividad motriz del usuario y aumentar las habilidades de los usuarios del motor, para ser más precisos, la percepción del usuario, las habilidades físicas, sociales, básicas y específicas. Se compone de un cilindro central, con un asa en un extremo de manera que el usuario puede cogerlo, y el otro extremo se forma en una esfera media, aproximadamente del tamaño de una pelota de tenis, que hace posible que rebote. Es aproximadamente 20-25 centímetros de tamaño, aunque se podría hacer en un tamaño más grande.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  • The aim is to increase motor skills (perception, physical, social, basic and specific) and intrinsically develop motor creativity.
  • With this invention it is possible to work and develop nearly every part of motor creativity, in addition to being used in nearly all the motor skills using moving objects, since with this device it is possible to carry out throws, striking movements, pushes, pulls, catches, bounces, slides, leaps etc. This makes it possible to use it as a more effective substitute in the teaching and learning of the majority of said skills, with a greater diversity of execution of movements and increased wealth of learning, without being limited to the learning of stereotypical techniques.
  • The educational device is equally usable with every level of child, young person and adult, since it can be used with every type of user and its easy handling means that it can be thrown, rolled, slid, bounced, used individually, by pairs or by groups.
  • The patent is of practical application in every sphere of education, specifically in physical education classes, in learning and specialisation sessions for a sport outside an educational institution and in recreational physical activities carried out by children as a leisure activity. Leer más
O-1161PHARM-REGION, Ltd. / Rusia 524

Solicitar información>> Compartir tecnología>>
Programa de investigación y desarrollo basados en la plataforma biotecnológica NovoBio

Biotechnology, cell cultivation, Cell, bioscience
- Descripción de la oferta tecnológica :
  
  Es bien sabido que hay tres partes significativas de cultivo de células. Estos incluyen la tensión, la tecnología y el medio de cultivo. Aplicamos nuestra metodología (Novobio):
  1) para evaluar el potencial de la tensión aplicada para alcanzar el nivel máximo de acumulación de biomasa y de metabolito;
  2) para determinar el tiempo óptimo de duración y finalización de la fermentación de acuerdo con los parámetros de calidad predefinidos de cosechado masa celular;
  3) para estudiar los cambios en la estructura de edad de las células cultivadas durante el proceso de cultivo;
  4) para determinar la relación entre la estructura de edad de las necesidades de la población y fisiológicos en los componentes del medio de cultivo;
  5) para determinar la limitación factores de tanto el sustrato de energía como otros componentes del medio de cultivo;
  6) para determinar la influencia de factores físicos y reológicos en cultivo de células
  7) para optimizar la composición del medio de cultivo y el método de alimentación para el medio de cultivo (tipo de fermentación: batch, fed-batch o continuo);
  8) para desarrollar los manuales y las instrucciones de preparación del inóculo sobre la base de la estructura de edades y la concentración.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Biotechnology platform NovoBio consists of three major parts.
  
  1. Unstructured model energy limited the growth of microorganisms (developed in collaboration with Dr. Victor Derbyshev)
  2. Structured kinetic model.
  3. Structured kinetic model substrate utilization and valuable metabolite production.
  
  All three models provide an Integrated mathematical Model of Development (IMD), which is the basis of the biotechnology platform NovoBio.
  
  We will not bother you with mathematical derivation of all the equations that are the basis of the model, only the final equations for the calculation of the growth dynamics of biomass and valuable metabolites will be presented. Detailed description of the derivation of the equations for periodic and continuous catches of cell culture is presented in published papers.
  
  This slide shows two derived equations for periodic conditions. The first of the equations is applied in the case where the biomass is the fermentation aim in the periodic conditions, the second one is applied in the case where valuable metabolite is the cell culture aim.
  
  Most not previously used important parameters have a specific physical meaning and are used for the solution of these equations, namely: Factor A that determines the rate of inhibition of cell growth, as it determines the ratio of energy amount to maintain vital functions to energy assumption for the development, which determines the dynamics of accumulation of stable cells ceasing their growth. The most important indicator of cell culture is factor R, which determines the age structure of the population, is an indicator of cell synchronization on age and the completion of the batch process. K factor is the product of the growth rates for the total number of cells and the cells in a dormant state.
  Leer más
O-1152Power Electronics Systems Group at University Carlos III de Madrid / España 2

Solicitar información>> Compartir tecnología>>
Herramientas Cad para el diseño de sistemas electrónicos energéticos

Real Time Systems, equipment;Electronic engineering;Embedded Systems, Electronic circuits, components
- Descripción de la oferta tecnológica :
  
  El Power Electronics Systems Group de la Universidad Carlos III de Madrid ofrece su amplia experiencia y trayectoria en el desarrollo de herramientas CAD de alto valor añadido para el diseño de equipos y sistemas de electrónica. El grupo proporciona una amplia experiencia en el diseño y el modelado de convertidores de potencia, que incluye el modelado, etapas de análisis y selección de topología / arquitectura, tanto para los convertidores, así como para sistemas de energía con múltiples convertidores.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - The design problem is analyzed and solved with deep knowledge of the concepts involved.
  - Multiple designs comparatives and efficient filtering criteria.
  - The output results are presented in multiple graphic formats updated in real time.
  - High connectivity with commercial circuit simulators, which allows the user a fast, friendly interface for design validation.
  - Models generation based on measurements and sent telematically by the client.
  - Efficient generation of economical offers and reports. Leer más

Proveedor de innovación destacado IRIS Research & Development

Sobre IRIS Research & Development

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de IRIS Research & Development

O-166CORPORACIÓN ALIMENTARIA PEÑASANTA / España 2847

Solicitar información>> Compartir tecnología>>
Non-invasive analysis and detection of micro-organisms in dairy products by ultrasounds

Food analyisis technologies, dairy products, ultrsounds, milk,
- Descripción de la oferta tecnológica :
  
  Non-invasive method of broad spectrum microbiological detection and analysis based on the propagation of elastic waves through the milk or a dairy product derivative. Advantages of the system: Non invasive, real time detection, effective, cost savings, reliable technology, sustainable, easy to use
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Mechanic wave propagation through a liquid depends on its characteristics. These can be altered by physic micro-changes caused by the presence of microorganisms. These little alterations on normal characteristics of milk cause that the ultrasonic wave takes more or less time to recover the way between the emitter and the receiver (velocity) and besides modify the absorption that “milk” environment exerts on ultrasonic waves, modifying the amplitude of wave peaks (absorption).
  
  The object of this patent is a new non-invasive method of broad spectrum microbiological detection and analysis based on the propagation of elastic waves through the milk or a dairy product derivative.
  
  The advantages of this system are:
  
  - NON- INVASIVE: intact package, without the introduction of electrodes or reagents.
  
  - REAL TIME DETECTION: both sample incubation and analysis are done at the same time, allowing the detection of microbial growth when it happens.
  
  - RISK MINIMIZATION: with a previous pre-incubation (1 hour), ULS analysis is constant and the detection takes between 9 and 24 hours.
  
  - EFFECTIVE: with a unique operation, you obtain different microorganisms detection.
  
  - COST SAVING: This technology does not use chemicals and no sample preparation is needed. This fact reduces the cost of the analysis.
  
  - RELIABLE TECHNOLOGY: Neither sample manipulation nor complicated operations by workers are needed, minimizing mistakes.
  
  - SUSTAINABLE: no material destruction, no packaging invasion and no product contamination.
  
  - EASY TO USE. By only manipulating the tactile screen that activates the opening/closing of the sample measurement module, the system sends the ultrasonic wave across it. The results are shown in the control panel with a very simple color code.
  
  Leer más
O-1157University of Louisiana at Lafayette / Estados Unidos 591

Solicitar información>> Compartir tecnología>>
Sextuplet Sistema de lentes cuadrupolo para enfocar partículas cargadas

Material science, ion lithography, photonics, medicine, energy, lens, planetary science, microelectronics, astronomy, archeology, nanotechnologies, physics, ion beam, ions
- Descripción de la oferta tecnológica :
  
  Sistema sextillo de lentes cuadruplo para enfocar partículas cargadas, el sistema de lentes se compone de dos tripletes simétricos de juegos de lentes. Esta tecnología mejora la resolución del haz de iones y se centra en un sistema de lentes fijas (magnética o electrostática) permitiendo el óptimo pequeño tamaño del punto del haz.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Charged particle focusing systems have many valuable uses, including those wherein the charged particles are accelerated. The focusing systems for many charged particle systems employ multiple quadrupole lenses in parallel with the optical axis. For high energy applications, increased beam current is desired and this can be achieved by enlarging the effective beam converging angle.
  
  However, the size of the beam converging angle is limited by the spherical aberration, which is present to some extent in all designs of probe-forming systems, thus optimum spatial resolution can typically only be achieved at the expense of a reduction in beam current.
  
  The current invention describes a lens system with sextuplet quadrupole arrangement that permits focusing of ion beams at various focal lengths, thus mitigating intrinsic aberration of the lens to achieve optimal small beam size without a need for reduced beam current. This technology improves the resolution of ion beam focusing within a fixed lens system to achieve an optimum small beam spot. Leer más
O-1136Jagiellonian University / Polonia 1393

Solicitar información>> Compartir tecnología>>
Nuevos catalizadores de óxido para la eliminación de óxidos de nitrógeno procedentes de las fuentes de emisión estacionarias.

heat plants, emissions management, emission sources, catalysts, nitrogen oxides, oxide catalysts, power plants, waste incinerators, boilers, diesel engines, reactors, air pollutants, air pollution, greenhouse gases, Greenhouse, carbon particles, fuel combustion, acid rains, power, waste, chemical
- Descripción de la oferta tecnológica :
  
  El objeto de esta oferta se refiere a nuevos catalizadores de óxido para la eliminación de óxidos de nitrógeno, partículas de carbono y polvo inorgánico procedente de los gases de escape en el reactor que fue diseñado para este propósito. Pueden ser aplicable en CHP ("combined heat and power plants"), las plantas de ácido nítrico, incineradoras de residuos, motores o calderas de pequeño y mediano tamaño.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The experiments carried out with the assistance of these catalysts showed a high conversion efficiency of nitric oxide to nitrogen at relatively low temperatures – up to 100%. Designed reactor allows the direct removal of nitric oxide from the exhaust gases via the efficient decomposition of nitric oxide and, at the same time, systematic removal of carbon particles and other solid particles.
  Leer más
O-1119MP Lighting Inc / Canadá 1767

Solicitar información>> Compartir tecnología>>
Innovadora tecnología de refrigeración a base de la combinación de disipador de calor y ventilador (sistema de enfriamiento activo)

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics
- Descripción de la oferta tecnológica :
  
  El sistema de refrigeración se ha simplificado extremadamente mediante la conexión de la matriz de termistores directamente en la línea de alimentación del ventilador de tal manera que pueden hacer una doble función al mismo tiempo: sensores de temperatura y de la corriente operacional del ventilador. Podemos proporcionar pequeño tamaño de la matriz mediante el uso de termistores de SMD resistencias térmicas, por lo que podría ser colocado muy cerca del objeto de refrigeración (disipador de calor, etc.) Tampoco se necesita una fuente de alimentación adicional, excepto para el ventilador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The original active cooling system was developed on the base new concept using of matrix of NTC thermistors for thermal management of LED lamp. The NTC thermistor array has been connected directly in the power line of the fan. Being thermally coupled to heat sink of LED lamp and electrically coupled to fan the NTC thermistor array capable to perform double function in the cooling system: changing its resistance by means of changing of temperature of heat sink (acting as temperature sensor) and changing of current through fan by means of changing its resistance (acting as current regulator).
  
  As result the configuration of active cooling system is simplified significantly and its size, weight and cost price have been reduced. This active cooling system was realized as “cooling module” which integrates heat sink, fan and intermediate plate - thermo conductor (with NTC thermistor array inside) for LED’s PCB attaching.
  
  A lot of samples of “cooling module” were prototyped and tested with various kind of LED lamp in the range of output power (10 – 40) Wt and DC fan 12V; 1Wt. Cooling system consumes power no more than (3-6) % of output power of LED lamp and provide thermo regulation of LED’s PCB in LED lamp with accuracy (+/- 5*C) in the range (45-65) *C temperature of LED’s PCB under full load of LED lamp. Leer más

Proveedor de innovación destacado Environmental and Industrial Catalysis Applications

Sobre Environmental and Industrial Catalysis Applications

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de Environmental and Industrial Catalysis Applications

O-851University of La Laguna / España 1488

Solicitar información>> Compartir tecnología>>
Herramienta para apretar tuercas operando en espacios reducidos

tool, tightening nuts, confined spaces, nut
- Descripción de la oferta tecnológica :
  
  Este es un diseño que permite construir una "continuous adjusting open end wrench". El dispositivo es útil en situaciones en las que una llave de tubo o una llave de extremo cerrado no puede ser utilizada. Este es generalmente el caso para las tuercas que deben moverse a lo largo de los tornillos sin acceso a los extremos de los pernos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  It is a well known fact that the smallest angle an open end wrench needs to allow moving a bolt is 30 degrees. The wrench is positioned over the nut, it is rotated 30 degrees, the wrench has to be removed and rotated over its own axis 180º and placed again over the nut to allow a further 30º movement. This is a time consuming procedure.
  
  Fixed and adjustable ratcheting open end wrenches are available in the market. These tools do not have to be removed and rotated 180º over its own axis. Nevertheless they have to be moved back and forth and when the nut needs a long run over the bolt, the procedure is time consuming.
  
  The tool presented here has the main advantage that can be motorized, connected to an air compressed ratchet or a manual ratchet. The rotation direction can be changed externally without removing the tool. The tool is not adjustable. It has the same width as an adjustable wrench for the bigger nut it can handle. Smaller nuts can be handled by placing an add on piece.
  A metal clip is introduced to keep the nut centered with the rotation axis. Once the user gets accustomed with the tool, the clip is not longer necessary. The internal mechanism has a pending european patent and can be transferred. Leer más
O-1150Optoelectronics and Laser Technology Group at University Carlos III de Madrid / España 5

Solicitar información>> Compartir tecnología>>
Sensor óptico para medir el estado de la carretera

traffic, roadway, road, optical sensors, vehicles, Automotive, highway
- Descripción de la oferta tecnológica :
  
  Investigadores de la Universidad Carlos III de Madrid han desarrollado un sensor de láser óptico, alta sensibilidad, gama y compacto, que puede detectar a distancia la presencia de hielo, el agua, la nieve y otras sustancias en la superficie de la carretera.
  Su funcionamiento no se ve afectado por las obras de mantenimiento en la carretera y, opcionalmente, se puede cargar en un vehículo.
  La información recogida es fundamental para establecer las necesidades de tratamiento de la carretera y detectar los riesgos (es decir, el hielo negro).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  A device that can remotely detect the presence of ice, water, snow and other substances on the surface of the road. This device consists of two or more laser sources and optoelectronic and electronic detection units. The techniques used for signal modulation provide a device with a high scope and sensitivity. Leer más
O-1158University of Louisiana at Lafayette / Estados Unidos 510

Solicitar información>> Compartir tecnología>>
Proyectiles Munición Hybrid-luminiscentes (Low Observable rastro Municiones)

Munition, ammunition, LOT, trace, triboluminescent, photoluminescent, luminescent
- Descripción de la oferta tecnológica :
  
  Esta invención se refiere a material luminiscente utilizado en proyectiles municiones y sus métodos de fabricación. Más particularmente, la invención se refiere a materiales luminiscentes que son fotoluminiscente o triboluminescent. La tecnología descrita aquí ofrece permisos de luminiscencia específica y única para el tirador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The photoluminescent and triboluminescent material can be placed at various locations on the projectile. In one configuration, the triboluminescent material that gives off light when the projectile impacts the target. In another configuration, a photoluminescent material provides a during flight and the triboluminescent material provides identification of target impact. In another configuration, the triboluminescent material is used to provide both the ballistic trace and the impact identification. Methods of making the hybrid luminescent ammunition are also provided. Leer más
O-1130Pointjust s.l. / España 627

Solicitar información>> Compartir tecnología>>
Nueva tecnología de control de cocción de alimentos, basada en conocer como se distribuye la temperatura en su interior mientras se cocina y anticipar su evolución.

Food, technology, cooking, grilling, control, Happcc, meat, fish, steack, perfect, cook, grill
- Descripción de la oferta tecnológica :
  
  Haz el filete perfecto y repítelo cuando quieras. Point Just es una respuesta a las preguntas a las que todos los cocineros se enfrentan a la hora de buscar el filete perfecto.
  
  Cuál es la cantidad apropiada de calor? ¿Cómo se transmite el calor dentro de la carne? ¿Cuándo debo darle la vuelta y cuando tengo que sacarlo del fuego? ¿Cómo afecta la temperatura inicial de la carne a su cocción? ¿Qué influencia tiene el tipo de producto sobre cómo se cocina? ¿Por qué es diferente la carne del pescado? ¿Qué influencia tiene el grosor de la carne a la hora de cocinarla?
  
  La cocción de los alimentos es el último paso en su preparación y determina la calidad del producto final. Si el resultado de la cocción no es el esperado, los comensales lo rechazaran, porque la carne esta poco hecha o demasiado cocinada.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  What is the appropriate amount of heat? How is the heat transmitted inside the steak? When should I turn it over and when do I have to remove it from the heat? How does the initial temperature of the steak affect its cooking? What influence does the type of product have on how it’s cooked? Why is meat different from fish? How does thickness influence cooking?
  
  The cooking of the food is the last step in its preparation and determines the quality of the final product. If the result of the cooking is not what is expected, the diner will reject it, because the steak is too rare or overcooked.
  
  Until now, too much attention has been paid to the heat. This is one of the factors that affect cooking performance, but not the only one. The type of food, the thickness of the food, its initial temperature, or how it receives and transmits the heat internally, are also decisive in the end result of the cooking.
  
  Our technology is based on knowing how the temperature is distributed within the steak during its cooking, and predicts its evolution. On this basis, our software manages the cooking process to get your perfect steak.
  
  We have develop a hand fitted device, using low-cost electronics, temperature control (thermocouples), distance measurement, and computer literacy, the value is added by our knowledge of cooking processes, with which we will guide the cook to prepare his perfect steak.
  
  Our technology obtains information from inside the food during cooking, it analyses it in real time and anticipates its development, both in the heat-receiving surface (which will define its outer finish), and the interior of the food (which will define its cooking point).
  
  Based on this, it sends simple instructions to the cook (Increase heat, reduce heat, turn me over, remove me from the heat), to adjust the cooking to the characteristics and performance of the particular piece of food, guiding the cook to his aim. Leer más

Proveedor de innovación destacado University of Seville

Sobre University of Seville

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Seville

O-1116PLAZARIUM - PLASMA GASIFICATION PLANTS AND PLASMA TORCHES / Rusia 2036

Solicitar información>> Compartir tecnología>>
Plantas móviles de gasificación de plasma y eliminación de residuos peligrosos

domestic waste, wastewater, paint waste, biological waste, medical waste, waste, hazardous waste, plasma, plasma gasification, coal gasification
- Descripción de la oferta tecnológica :
  
  Los sistemas móviles de residuos peligrosos plasma dispositivo MGS PLAZARIUM están diseñados para la gasificación de plasma y eliminación de residuos peligrosos con un total grado destrucción y la producción de gas libre de contaminación (СО + Н2).
  
  (eliminación de desechos médicos, desechos biológicos, de pintura y barniz residuos "líquido", los residuos de acondicionamiento de agua, tratamiento de aguas residuales y el uso del agua, los residuos líquidos de las plantas de purificación, gasificación de carbón, basura y madera gasificación de residuos domésticos).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The mobile systems of hazardous waste plasma disposal PLAZARIUM MGS are designed for plasma gasification and disposal of hazardous waste with total-degree destruction and production of pollution-free syngas (СО + Н2).
  
  (disposal of medical waste, biological waste, paint-and-varnish "liquid" waste, waste of water conditioning, wastewater treatment and water use, liquid waste of purification plants, coal gasification, refuse wood and domestic waste gasification). Leer más
O-836UATEC - Technology Transfer Office of University of Aveiro / Portugal 1836

Solicitar información>> Compartir tecnología>>
Nuevo sistema combinado para la fijación de implante óseos

orthopaedics, implants, Biomechanics, bone, biomedical devices, medical devices
- Descripción de la oferta tecnológica :
  
  Un grupo de investigación de una Universidad portuguesa ha desarrollado un sistema combinado para la fijación de implantes óseoa (metálicos o no metálicos) que por su geometría permite la fijación del implante a través de 2 maneras diferentes y simultáneas, combinado, que permite una fijación óptima y minimiza la perdida ósea ylas fracturas (común mediante técnicas actuales) cuando el implante debe ser eliminado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Because of its characteristics, in this combined system the surface area (coated with any material or structure to stimulate the fixation and/or the integration with the bone or bone tissue) is still in direct contact with the bone tissue and allows the rest of it to be fixed through cementing the bone between the bone itself and the bone tissue. This procedure minimize bone losses when the implant is been placed and also when removal is required for replacement. Leer más
O-1140University of Alicante / España 1463

Solicitar información>> Compartir tecnología>>
Nuevo fotobiorreactor para el cultivo masivo de microalgas

biomass, cosmetics, pharmaceuticals, food supplements, aquaculture, biofuels, microalgae, photobioreactor
- Descripción de la oferta tecnológica :
  
  El grupo de investigación de procesamiento de polímeros y pirólisis de la Universidad de Alicante ha desarrollado un nuevo fotobiorreactor para cultivar masivamente diferentes especies de microalgas a escala industrial con la automatización. Las principales ventajas son: alta productividad, un mejor consumo de CO2, una mejor transferencia de la luz al cultivo, una agitación más eficaz y menos tiempo de limpieza y mantenimiento. Puede ser utilizado en biocombustibles, acuicultura, alimentos, productos farmacéuticos, cosméticos, etc El grupo de investigación busca empresas que adquieren esta tecnología para el acuerdo de licencia.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The main innovation of this invention is:
  
  • This novel photobioreactor combines the mechanism of a bubble column with the air-lift type for higher biomass production than that obtained for both systems separately.
  Leer más
O-1139University of Alicante / España 1025

Solicitar información>> Compartir tecnología>>
Nuevo procedimiento para la eliminación de la tinta de impresión a partir de películas de plástico

recycling, plastic waste, plastic recycling, packaging, flexible packaging, Plastic, plastic films, plastic film, printed ink, inks, polythene, polypropylene, polyester and polyamide, cleentech, printing
- Descripción de la oferta tecnológica :
  
  El Grupo de Residuos, pirólisis y combustión de la Universidad de Alicante ha desarrollado un nuevo proceso para la eliminación de la tinta impresa a partir de películas de plástico utilizadas en envases flexibles sin necesidad de utilizar ningún tipo de disolvente orgánico. Como resultado, se obtiene un producto puro, de alta calidad de la tinta-libre, para el reciclaje en una amplia variedad de aplicaciones. La tecnología ha sido probado con éxito en diferentes materiales plásticos y es viable para tintas a base de disolventes y agua. Se buscan empresas para un acuerdo de licencia y cooperación técnica.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The most innovative aspects of this technology are:
  
  • The process for the removal of the ink is completely innovative and ecological, because it does not use organic solvents.
  • The technology has been successfully tested on different plastics, such as Polythene, Polypropylene, Polyester and Polyamide. It is viable for both water and solvent based inks. Leer más

Proveedor de innovación destacado University of Granada

Sobre University of Granada

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Granada

O-1134IK4 - IKERLAN / España 735

Solicitar información>> Compartir tecnología>>
Potenciostato de pequeño tamaño portátil para la detección de especies y electroquímica QA / QC

quality assurance, quality control, sensors, electrochemical, electrochemistry, electrochemical sensors, potentiostat, Point-of-Care devices, microfluidic, Dairy, Food
- Descripción de la oferta tecnológica :
  
  Instrumento de pequeño tamaño y condiciones electronicas personalizadas para sensores electroquímicos. El dispositivo se puede utilizar fácilmente para crear una herramienta de detección para los propósitos de control de calidad o integrado en los sistemas existentes para mejorar sus capacidades.
  
  Alternativamente, es posible crear una herramienta de detección electroquímico portátil basado en nuestra experiencia en microtecnologías para la reacción de interés de los usuarios. El desarrollo de los consumibles de la herramienta dependerá del tipo y características de la reacción.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Small sized device with the necessary circuitry developed for connectivity to existing detection tools
  Ideal for integration into Point-of-Care devices aimed at ensuring quality at production sites
  Capability for handheld devices
  Consultancy and production service available to develop your customized electrochemical solution. Leer más
O-1125University of Cádiz / España 669

Solicitar información>> Compartir tecnología>>
Nuevo proceso para el uso de bagazo de cerveza (granos cerveceros gastado) para obtener materias primas para la producción de biocombustibles

biofuels, biofuel, biodiesel, beer bagasse, beer bagasse, beer, brewers, breweries, brewing industry, agro-food, agroofood, biomass, bagasse, waste management, waste
- Descripción de la oferta tecnológica :
  
  El grupo de investigación en la UCA sobre "alelopatía en plantas superiores y microorganismos" (FQM-286) ha desarrollado un procedimiento de hidrólisis ácida, por lo que los materiales precursores de biocombustibles y otros productos de alto valor agregado se obtienen a partir de cereales o bagazo pasado, el principal producto de desecho de cervecerías . El contenido de este material en los lípidos y fibra alimentaria hace que sea un producto ideal para esta aplicación. El objetivo es hacer un uso económico de los subproductos de bajo valor de la industria cervezera, para la producción de bioetanol y biodiesel.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Currently, considerable quantities of lingo-cellulosic residues are generated continuously in many sectors of the agro-food industry. If these can be suitably processed, they are of great commercial interest to industry as potential raw materials for the production of biofuels and a variety of other high value-added products.
  
  The residual biomass of the agro-food industry typically has a high content in lipids, carbohydrates, proteins and other compounds of industrial interest. The only limitations to its use as a precursor of biofuel are the economic viability of the process for obtaining these precursors and their quality.
  
  One of the byproducts of special interest for this application is spent beer grain, also known as bagasse; given the existing lack of commercial value, this bagasse is widely available as a low-cost raw material. Currently, the principal application of bagasse is as feedstuff for livestock. In general, bagasse does not represent a source of income for breweries, and the reason why it is sold is to minimize the associated problems of waste management and disposal.
  
  The UCA research group on "Allelopathy in Higher Plants and Microorganisms" (FQM- 286) has developed an acid hydrolysis procedure whereby precursor materials for biofuels and other high -value-added products are obtained from beer bagasse. Its content in lipids and food fibre (equal to or more than 5% and 20%, dry weight, respectively), make it an ideal material for this application. This would represent a more attractive commercial outlet for many of the residues resulting from operations of the agro-food industry, and in particular, for beer bagasse.
  
  The object of the process is to obtain two different products. The first is an oil consisting mainly of the fats contained in the bagasse; the second is a substance rich in sugars or molasses. The oil is of interest as raw material for the production of biodiesel by the process of transesterification; the molasses can be employed as raw material for the production of bio-ethanol by means of fermentation. Molasses can also be formulated as sugar, after a crystallization process.
  
  The oil would be particularly useful for correcting the viscosity of biodiesel, thus achieving the optimum parameters for its use as biofuel.
  
  In outline, the process developed by the research group consists of a principal line, in which a series of operations take place for the conditioning of the bagasse, such as milling, extraction of lipids and the separation of the resulting solids. Downstream, this line divides into two secondary lines: in one line, for production of oils, the solvents from the prior extraction stage are separated out; in the other secondary line, for the production of molasses, an acid hydrolysis of the sugars is carried out.
  
  Another significant feature is that the optimum operating mode of the process is continuous operation, although batch loading is also accepted. Leer más

1 2 3 4 5 ... 8

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en Ingeniería y ciencias tecnológ... | Ofertas

Innovación en Ingeniería y ciencias tecnológ... | Ofertas

Nanorods, dendritic, magnetic nanostructures, nanoparticle, Nanostructures, Nanowires, nanotubes, nanomanufacturing, electrochemistry, chemical vapor deposition, supercapacitors, chemical, Chemistry

FeRh, FePt, recording, recording media, magnetic recordings, Storage, storage media, magnetic storage, Nanostructure, hardware, Electronics, computer science, nanoparticles

transistor, flip, flop circuit, clocked

Smart card, card, controller, read, write, magnetic strips

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology

Dosimetry, radiotherapy, cancer, optical fiber, security, hospitals, clinics, medical equipment

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal

Aramid, aromatic polyamides, high performance fibers, crosslinked fibers, crosslinked aramids

Crosslinking of aramid fibers by conventional production technologies (wet, dry, and dry-jet wet spinning). The crosslinking of armid fibers will render materials with even higher fire, mechanical and electrical-isolation performance. Leer más

engineering, energy, catalysis, dimethyl ether, Carbon Dioxide, methanol

Wi-FI HD camera, HD camera, camera, medical instrumentation, sport devices, security, industrial imaging, imaging, video processing, dentist

traffic, schools, school, School Transport

- Using pseudo-optimal algorithms and optimal ad-hoc adapted to this kind of problems - Integration of them in Geographic Information Systems to display more comfortably locations (villages, schools, etc..), Roads and routes learned - Consideration of several targets simultaneously etc.). Leer más

Oxygen concentrator, MEDICAL, Oxygen purity, PSA process, Zeolite material

An Educational Device, Motor Creativity, Sport, balls, Frisbees, ringos, indiacas

Biotechnology, cell cultivation, Cell, bioscience

Real Time Systems, equipment;Electronic engineering;Embedded Systems, Electronic circuits, components

Food analyisis technologies, dairy products, ultrsounds, milk,

Non-invasive method of broad spectrum microbiological detection and analysis based on the propagation of elastic waves through the milk or a dairy product derivative. Advantages of the system: Non invasive, real time detection, effective, cost savings, reliable technology, sustainable, easy to use

Material science, ion lithography, photonics, medicine, energy, lens, planetary science, microelectronics, astronomy, archeology, nanotechnologies, physics, ion beam, ions

heat plants, emissions management, emission sources, catalysts, nitrogen oxides, oxide catalysts, power plants, waste incinerators, boilers, diesel engines, reactors, air pollutants, air pollution, greenhouse gases, Greenhouse, carbon particles, fuel combustion, acid rains, power, waste, chemical

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics

tool, tightening nuts, confined spaces, nut

traffic, roadway, road, optical sensors, vehicles, Automotive, highway

Munition, ammunition, LOT, trace, triboluminescent, photoluminescent, luminescent

Food, technology, cooking, grilling, control, Happcc, meat, fish, steack, perfect, cook, grill

domestic waste, wastewater, paint waste, biological waste, medical waste, waste, hazardous waste, plasma, plasma gasification, coal gasification

orthopaedics, implants, Biomechanics, bone, biomedical devices, medical devices

biomass, cosmetics, pharmaceuticals, food supplements, aquaculture, biofuels, microalgae, photobioreactor

The main innovation of this invention is: • This novel photobioreactor combines the mechanism of a bubble column with the air-lift type for higher biomass production than that obtained for both systems separately. Leer más

recycling, plastic waste, plastic recycling, packaging, flexible packaging, Plastic, plastic films, plastic film, printed ink, inks, polythene, polypropylene, polyester and polyamide, cleentech, printing

quality assurance, quality control, sensors, electrochemical, electrochemistry, electrochemical sensors, potentiostat, Point-of-Care devices, microfluidic, Dairy, Food

biofuels, biofuel, biodiesel, beer bagasse, beer bagasse, beer, brewers, breweries, brewing industry, agro-food, agroofood, biomass, bagasse, waste management, waste

Usuario nuevo (registro gratuito)

Usuario registrado

- Using pseudo-optimal algorithms and optimal ad-hoc adapted to this kind of problems
- Integration of them in Geographic Information Systems to display more comfortably locations (villages, schools, etc..), Roads and routes learned
- Consideration of several targets simultaneously
etc.). Leer más

The main innovation of this invention is:

• This novel photobioreactor combines the mechanism of a bubble column with the air-lift type for higher biomass production than that obtained for both systems separately.
Leer más