Otros : Oportunidades ...

1 2

O-1153University of Louisiana at Lafayette / Estados Unidos 290

Solicitar información>> Compartir tecnología>>
Síntesis asimétrica de compuestos de amina alílicos N-sustituidos

amination, amine, Chiral, chiral amine, petrochemical, fine chemical, agrochemicals, pharmaceutical compounds, olefins, aryl, alkene, esters, asymmetric allylic
- Descripción de la oferta tecnológica :
  
  Muchos productos naturales, incluyendo compuestos farmacéuticos y agroquímicos contienen funcionalidad amina quiral. Por lo tanto, la aminación asimétrico (quiral selectivo) de olefinas ha recibido mucha atención de diversas industrias. Recientemente, investigadores de la Universidad de Louisiana en Lafayette han desarrollado un nuevo método de síntesis asimétrica de compuestos de amina alílicos N-sustituidos. Y, este método ofrece numerosas ventajas técnicas respecto los actuales métodos asimétricos, incluyendo la síntesis asimétrica de aminas N-aril-sustituido alilo y ésteres beta-aminoácidos no naturales.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Technical Advantages include:
  ***Reduced number of synthesis steps; utilization of inexpensive compound rather than expensive transition metal complexes as chiral catalysts;
  ***Reduces wasteful synthesis of distomer enantiomer; ideal for syntheses utilizing expensive and/or precious starting material;
  ***Advantageous for synthesis of allylic amine compounds with multiple chiral centers where chiral HPLC separation is problematic
  ***Uniquely effective for synthesis of asymmetrical N-aryl-substituted allyl amines;
  ***May also be used in the production of non-natural chiral Beta-amino acid esters, chiral heterocycles, bioactive molecules or materials. Leer más
O-1185CELEROMICS TECHNOLOGIES, SRL / España 306

Solicitar información>> Compartir tecnología>>
Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology
- Descripción de la oferta tecnológica :
  
  Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc No es desechable ni requiere mantenimiento, no hay necesidad de matar a las células para llevar a cabo su recuento, reducción de la manipulación de células y se elimina la contaminación de células.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our systems plug to any laboratory microscope.
  
  It is able to count from 1 to 1000 microns in particles analyzed with a single device.
  No need for disposable material or reagents : savings 500-2000 EUR /year.
  It is able to count inside the bioreactor : no need to open the container / sacrifize the culture to perform the count. Leer más
O-1172HP Ingredients / Estados Unidos 322

Solicitar información>> Compartir tecnología>>
Composición de diterpenos extraídos de labdano Andografis Paniculata, útiles para el tratamiento de enfermedades autoinmunes y la enfermedad de Alzheimer por la activación de los receptores PPR-Gamma

neurology, Alzheimer, immune, immunology, immune health, autoimmune, Autoimmune diseases, nutraceuticals, brain health
- Descripción de la oferta tecnológica :
  
  Paractin ® (14-NEO-ANDRO) analgésico natural. Composición de Diterpenos labdano extraídos de andrographis paniculata útiles para el tratamiento de enfermedades autoinmunes y la enfermedad de Alzheimer mediante la activación de los receptores PPR-gamma.
  
  HP Ingredients se dedica a proporcionar los últimos avances científicos en nutraceuticos, colesterol, control de glucosa en sangre, control de peso, salud de las articulaciones, la andropausia y el envejecimiento saludable.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  A randomized, double blind, and placebo-controlled study in patients with rheumatoid arthritis (RA) was performed. 100mg of Paractin® were administered three times a day for 14 weeks, after a 2-week washout period to 60 patients with active RA. Patients were allowed to take prednisone or chloroquine (stable doses). MTX was administered to all patients as standard treatment.
  
  On day 1, and at the end of week 2, week 6, week 10, and week 14 the following exams were performed:
  1. Evaluation of the number of inflammatory and painful joints.
  2. Evaluation of pain by the patient utilizing the Visual Analog Scale (VAS).
  3. Improvement in the evaluation of health quality of life questionnaires
  4. Duration of morning rigidity.
  5. Global evaluation of symptoms by the patient and researchers.
  6. Global evaluation of the tolerance by the patient and researchers.
  
  Paractin® Group showed significant diminishing in:
  1. number of swollen joints (Paractin 9 vs Placebo 13)
  2. total grade of swollen joint (Paractin 11 vs Placebo 16)
  3. total grade of tender joints (Paractin 14 vs Placebo 17)
  4. HAQ (Paractin 19 vs Placebo 24)
  5. reduction of rheumatoid factor (Paractin 119 vs Placebo 130)
  6. reduction in IgA (Paractin 293.7 vs placebo 335) Leer más
O-1157University of Louisiana at Lafayette / Estados Unidos 587

Solicitar información>> Compartir tecnología>>
Sextuplet Sistema de lentes cuadrupolo para enfocar partículas cargadas

Material science, ion lithography, photonics, medicine, energy, lens, planetary science, microelectronics, astronomy, archeology, nanotechnologies, physics, ion beam, ions
- Descripción de la oferta tecnológica :
  
  Sistema sextillo de lentes cuadruplo para enfocar partículas cargadas, el sistema de lentes se compone de dos tripletes simétricos de juegos de lentes. Esta tecnología mejora la resolución del haz de iones y se centra en un sistema de lentes fijas (magnética o electrostática) permitiendo el óptimo pequeño tamaño del punto del haz.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Charged particle focusing systems have many valuable uses, including those wherein the charged particles are accelerated. The focusing systems for many charged particle systems employ multiple quadrupole lenses in parallel with the optical axis. For high energy applications, increased beam current is desired and this can be achieved by enlarging the effective beam converging angle.
  
  However, the size of the beam converging angle is limited by the spherical aberration, which is present to some extent in all designs of probe-forming systems, thus optimum spatial resolution can typically only be achieved at the expense of a reduction in beam current.
  
  The current invention describes a lens system with sextuplet quadrupole arrangement that permits focusing of ion beams at various focal lengths, thus mitigating intrinsic aberration of the lens to achieve optimal small beam size without a need for reduced beam current. This technology improves the resolution of ion beam focusing within a fixed lens system to achieve an optimum small beam spot. Leer más

Proveedor de innovación destacado Environmental and Industrial Catalysis Applications

Sobre Environmental and Industrial Catalysis Applications

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de Environmental and Industrial Catalysis Applications

O-757Biótica, Bioquímica Analítica, S.L. / España 2436

Solicitar información>> Compartir tecnología>>
Prueba única en el mundo certificada por AOAC RI para la detección rápida de Legionella en el agua en sólo una hora

Legionella, risk, fast test, Water
- Descripción de la oferta tecnológica :
  
  Empresa española ha desarrollado una prueba para la detección rápida de Legionella pneumophila en el agua, validada por los laboratorios de la norma ISO 17025 y certificado por AOAC Research Institute (Certificado # 111101).
  
  La técnica que se ofrece es una prueba que puede rápida y eficazmente detectar la cantidad de Legionella pneumophila libre e intacta (todos los serogrupos) en agua, basado en la captura de la bacteria por una interacción que depende de la integridad de la envoltura celular
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Spanish company specialized in fast microbiological detection is looking for distributors for the sole test in the world certified by AOAC RI to the rapid detection of Legionella in water in just one hour
  
  As the test can be applied on-site and/or in laboratory, giving the result in just 1 hour, remedial actions can be taken avoiding sustained periods of infective levels at risk installations. Conventional methods for Legionella pneumophila detection require at least 7 to 15 days for obtaining results.
  
  It is the only test that can satisfy the claiming limits to make corrective actions whether they are based on numeric values (100, 1000, 10000) as percentages of binary results (presence/absence, detected/not detected), because it also allows a quantitative estimation of the level of Legionella pneumophila in the sample.
  
  Low cost of implementation because test run without specific instrumentation and it is designed for a low average cost by analysis Leer más
O-1054Advanced Alternative Energy Corporation / Estados Unidos 3968

Solicitar información>> Compartir tecnología>>
New technology for conversion of low-value biomass to higher value end products

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid
- Descripción de la oferta tecnológica :
  
  A scalable and multifaceted energy and fuels processing technology providing for conversion of diverse low-value biomass, by products and wastes to higher value energy products has been invented, patented and developed. The technology is highly adaptive and the processes available are high yielding.
  
  An industrial, SME, larger company, or institutional or academic partner is sought for pursuing the joint venture development of various applications of this universal cleaner energy technology, and follow on commercialization. The subject technology is also available for licensing and/or joint development and commercialization outside the U.S.A.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Low value biomass is readily available from the many non-edible fractions of various food crops and this resource is widely produced at large scale, and is often found to be locally available and often extremely cheap as it is a by-product that does not require any additional planting, cultivation, harvesting, fertilizer or chemicals for weed and pest control. Thus it is simply a byproduct that is available for conversion along with dedicated fuel crops and municipal wastes to higher value products and is well suited for cleaner low cost sustainable energy production on the farm and/or in nearby communities. Leer más
O-1038Fermentation Pilot Plant / España 490

Solicitar información>> Compartir tecnología>>
Desarrollo de procesos de fermentación a escala piloto para las industrias farmacéutica, química, de diagnóstico y alimentaria.

fermentation, Biorreactor, Pilot Scale, filtration, centrifuge, Protein production, Cell disruption
- Descripción de la oferta tecnológica :
  
  La planta piloto de fermentación ofrece instalaciones que son adecuadas para el desarrollo de lotes, bioprocesos continuos y discontinuos en biorreactores. Están disponibles fermentadores con capacidad 2L, 5L, 50L y 250L, así como el equipo para las etapas iniciales de recuperación de producto y purificación.
  
  La Planta Piloto de Fermentación ofrece a las empresas e instituciones la experiencia del personal del Centro y el Departamento de Ingeniería Química para el desarrollo de proyectos que abarquen los diversos aspectos de procesos biotecnológicos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The staff of the Center has wide experience in fermentation processes with bacteria, yeast or fungi, which may or may not be genetically modified. The activities of the Center are focused on transferring this experience to pharmaceutical, diagnosis, fine chemical and food industries to increase their competitiveness.
  
  The Fermentation Pilot Plant is located in the Universitat Autònoma de Barcelona campus. It's exceptional position provides access to complementary scientific and technological services of the university.
  
  The Fermentation Pilot Plant offers to companies and institutions the experience of the staff of the Centre and the Chemical Engineering Department for the development of projects covering the diverse aspects of the biotechnologic processes, like:
  
  -Design, development and optimization of bioprocesses.
  -Fermentation engineering
  -Optimization of different culture strategies & techniques
  -Characterization of microorganisms.
  -Culture medium design.
  -Growth and production kinetics.
  -Analytical methods implementation.
  -Culture strategies study.
  -Scale-up development.
  -Downstream development.
  -Cell culture
  -Engineering of enzymatic reactions Leer más
O-202OPERON, S.A. / España 1325

Solicitar información>> Compartir tecnología>>
Development and Industrial Manufacturing of Monoclonal Antibodies

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests
- Descripción de la oferta tecnológica :
  
  Hundreds of hybridomes that are now producing Monoclonal Antibodies (MAb's) in ascites in cell culture. During these years, OPERON has developed its own MAb's that are currently used in many successful IVD tests around the world.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Since 1987, our R&D team has developed hundreds of hybridomes that are now producing Monoclonal Antibodies (MAb's) in ascites in cell culture. During these years, OPERON has developed its own MAb's that are currently used in many successful IVD tests around the world.
  
  Nowadays, OPERON can offer its MAb's technology as a R&D and Manufacturing service to its partners.
  
  Due to the manufacture of these MAb's in our special bioreactors, we can provide this product in the range of 500 mg to several gram for a very reasonable price per mg.
  Leer más

Proveedor de innovación destacado Knowledge innovation market

Sobre Knowledge innovation market

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de Knowledge innovation market

O-205OPERON, S.A. / España 1883

Solicitar información>> Compartir tecnología>>
OpeGen - Molecular Diagnostic kits

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests
- Descripción de la oferta tecnológica :
  
  OpeGen allows a fast detetion of DNA/RNA specific sequences. These new Nucleic Acid Testing (NAT) tests make possible that after a standard multiplex PCR Reaction, the target amplification will be detected in a reverse dot blot on a strip. The process can be done with basic lab equipment at small scale or with a programable stand alone lab instrument for volume batches (Autolipa).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Are you still using electrophoresis gel after your PCR reaction? We can bring your test to our OpeGen platform!
  
  More than 8 years ago, OPERON launched a new product line based on Molecular Biology. After working on the improvement of techniques and products related with Molecular Biology, we have launched OpeGen, a useful tool that combines the speed and simplicity of immunochromatography with the sensibility and specificity advantages provided by the Polymerase Chain Reaction (PCR).
  
  OpeGen allows a fast detetion of DNA/RNA specific sequences. These new Nucleic Acid Testing (NAT) tests make possible that after a standard multiplex PCR Reaction, the target amplification will be detected in a reverse dot blot on a strip. The process can be done with basic lab equipment at small scale or with a programable stand alone lab instrument for volume batches (Autolipa). Leer más
O-203OPERON, S.A. / España 3079

Solicitar información>> Compartir tecnología>>
New rapid tests (lateral flow) development

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests
- Descripción de la oferta tecnológica :
  
  Integral solution for rapid tests (lateral flow) design & manufacturing problems and allows the achievement of the CE mark in the client's commercial In Vitro Diagnostic tests.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  After working during 20 years in innovative lateral flow tests (immunochromatography), OPERON offers its integral solution for rapid tests (lateral flow) design & manufacturing problems and allows the achievement of the CE mark in the client's commercial In Vitro Diagnostic tests.
  
  We offer the following services:
  
  - Personalised design of rapid tests according to the client's needs
  - Large scale production of rapid test designed by the client
  - Manufacturing of OEM formats rapid tests (from 100.000 to 4 million tests per year)
  - Co-operation with other companies & public institutions in the development & manufacture of immunoassays for the detections of new biochemical markers
  
  We also offer the possibility of manufacturing the tests with latex particles, which allows you to read the results in COLOR (red, blue, green & purple). Leer más
O-981EcoPerfiles Olontigi / España 922

Solicitar información>> Compartir tecnología>>
Palets de plástico modulares montables hechos a medida

MODULAR PLASTIC PALLETS, plastic pallets, pallets, pallet, logistics, ecopalet, exporters, Warehouse, land transport, Manufacturing
- Descripción de la oferta tecnológica :
  
  El producto que ofrecemos son palets de plástico modulares montar / removible a medida, ofreciendo un rendimiento excelente físico-químicamente y eficaz en la variedad de formatos, pérdida de peso, asequible y muy competitivo.
  
  100% ecológico: reciclable un número indefinido de veces, se pueden limpiar todas las partes que componen el material de plástico reciclado, lo que elimina toneladas y toneladas de residuos generados por los envases usados, problemas para las autoridades de todo el mundo que implica las reservas de madera muerta. Por lo tanto, resulta ser la mejor opción ambiental.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our product helps to minimize the indiscriminate felling of trees, contributing to better the environment for sustainable development, which we consider of vital importance. In its manufacturing process, using recycled materials and is an activity that does not pollute or harm the environment because it do not generate waste in their manufacturing process, no environmental conflict.
  
  Method of manufacturing. So far the use of pallets was limited by the use of flat wood pallet standard dimensions, and injected high-cost products and parts rotational molding or thermoformed, limiting its use to few applications. After a long period of study and hard work, we have obtained this type of plastic pallet assembly/removable, concluding that the most feasible for the manufacture of our products (of all those known in the world of plastic) is via:
  
  - Hollow extrusion of rigid profiles, reinforced interior walls (that gives us enough to play any shape and size) well as the strength, consistency and robustness that this type of product demand, and ...
  
  - Injection, from which to obtain small pieces of additional anchors, added to those already existing in extruded parts, providing appropriate fasteners to consolidate our ecopalet.
  
  Each of the parties obtained with both methods, 100% composite plastic, that once assembled each other with a method that makes it easy to anchor, we provide technical and mechanical characteristics we demanded was to have our pallet, avoiding as much as posible nails, splinters or any other non-plastic, possible to change a damaged part easily, simple and clean.
  
  This new manufacturing technique and practice of our product, facilitates the acquisition of small, medium and large productions, in relation to a particular format or size, offering also the possibility of combining color integral parts of the pallets; also, offers the possibility of including the logo or mark in society, so, make a product more aesthetically appropriate to the image of your company or sector in which it operates, which resulted in a more personalized product without the need to invest time (labor, tools, ...) or expensive molds.
  
  Custom product, easier to find in stores or deposits, also contributing on advertising. This product has meant a technological leap in logistics industry in general, and exporters, food, pharmaceutical and chemical particularly, compliance with national regulations and international environmental and quality, providing a new twist to developments in this field. Leer más
O-963Biostimul Pharma Ltd. / Bulgaria 1059

Solicitar información>> Compartir tecnología>>
BIODEX proceso patentado: cúmulos de calcio (calcio complejos péptido) con racimos de calcio modificados (complejos de calcio de péptidos) - con mejoradas características bioquímicas y biológicas, que se extraen de forma no química.

osteoporosis, osteopenia, calcium, bone, bone density, bone metabolism, nutritional supplements
- Descripción de la oferta tecnológica :
  
  La innovación propuesta hace que el proceso de restauración de la densidad ósea sea mucho más corta en comparación con otros prototipos. El resultado es logrado gracias al hecho de que BIODEX contiene sustancias similares e idénticas a los cuerpos humanos. En la búsqueda de fuentes de información científica-técnica y de patentes no se ha encontrado ningún producto que tienga una unidad similar de las características principales de los mismos efectos positivos como se logra en BIODEX.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Patent claim BIODEX: calcium clusters (calcium peptide complexes) with modified calcium clusters (calcium peptide complexes)- with enhanced biochemical and biological features, that are extracted by non-chemical, patented process is handled by microscopic particles and they are absorbed by the body fast. As a result, is obtained and a mixture of calcium clusters (calcium peptide complexes), including a group of 27microelements: mainly copper, iron, manganese, molybdenum, phosphorus, sulfur, zinc, silicon and others, which are essential to the biochemical processes in the body, high-speed impact (both preventive and curative) on bone, restore bone density and bone metabolism, regulated it to normal levels. BIODEX meets the most stringent regulations for purity of the products in terms of lead and heavy metals. Leer más

Proveedor de innovación destacado University of Aveiro - UATEC

Sobre University of Aveiro - UATEC

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Aveiro - UATEC

O-892Ventura Medical Technologies, S.L. / España 868

Solicitar información>> Compartir tecnología>>
Nuevo kit quirúrgico para Pectus excavatum

Pectus Excavatum, Pectus Plate, Pectus UP, medical devices, Design & Production Engineering
- Descripción de la oferta tecnológica :
  
  Ventura Medical Technologies junto con el Dr. Carles Bardají, de la Corporació Sanitària Parc Taulí, han desarrollado un nuevo método quirúrgico (Taulinoplastia) y un nuevo producto (Pectus Cirugía Up Kit) para la corrección de Pectus excavatum reduciendo sustancialmente el riesgo de la cirugía y el tiempo de recuperación postoperatoria al minimizar las complicaciones de las personas afectadas por esta dolencia.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The pectus excavatum is a congenital deformity of the chest that is characterized by chest takes a concave shape as the "funnel". The sternum inward investment is generating pressure on vital organs of the chest, restricting the growth potential of these causing shortness of breath and difficulty breathing. This malformation occurs in 1 of every 1000 children and is the most common congenital anomaly of the chest wall (90%). The ailment manifests slightly worse at birth and during childhood and adolescence.
  
  From the collaboration between Ventura Medical Technologies and Dr. Bardají born a new method, Taulinoplastia, and a new surgery kit, Pectus UP, to correct the Pectus Excavatum presenting suitable advantages in front of the methods used currently. Pectus UP is a set of tools and implants fabricated with the aim to treat Pectus Excavatum by Taulinoplastia being less painful and less post-operative time than other methods. Leer más
O-857University of Alicante / España 1133

Solicitar información>> Compartir tecnología>>
Novel visual inspection system for quality control in production processes

inspection vision, visual automatic, agrofood industry, quality control
- Descripción de la oferta tecnológica :
  
  Un grupo de investigadores españoles ha estado trabajando en sistemas de inspección que utilizan una o más cámaras, junto con los adecuados sistemas de iluminación para capturar las imágenes necesarias. Estas imágenes se envían a un ordenador que procesa la información para realizar la clasificación de acuerdo con los criterios de calidad y las características solicitadas por el proceso de producción.
  
  El principal aspecto innovador de esta tecnología es el uso de técnicas avanzadas de procesamiento de imágenes para obtener sistemas de inspección de mayor calidad. También es posible el uso de imágenes de sonar o la adición de
  luz estructurada con el medio ambiente con el fin de analizar defectos en los productos y formas. Por lo tanto, los problemas de brillo y sombras de imágenes puede ser evitado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Visual inspection systems are based on the employment of pictures, both in the visible and infrared or ultraviolet spectrums. They can also make use of sonar images or adding structured light to the environment in order to analyze defects and shapes in products.
  
  The figure shows an image obtained by means of a range camera that allows distinguishing an object by its depth. Thus, its position and defects can be determined through its volume.
  
  The technology is totally developed and has been laboratory and field tested, although, it requires a particular specification for each case. The technology can be used for real-time inspection of production processes, both for the recognition and for the classification and quality inspection. Leer más
O-853University of Alicante / España 953

Solicitar información>> Compartir tecnología>>
Nuevo método para la síntesis controlada de sólidos mesoporosos

catalyst catalysis chemical chemistry heterogeneous metal environment mesoporous
- Descripción de la oferta tecnológica :
  
  El grupo de investigación ha desarrollado un método para obtener sólidos mesoporosos de cualquier tipo de sal de POM. El método es bastante simple y la reacción de síntesis, de acuerdo con el catión utilizado, es controlada por la temperatura y el pH.
  
  • Nueva técnica de síntesis de catalizadores.
  • Permite un fácil control de volumen, tamaño y número de poros.
  • Genera un alto volumen de mesoporosidad (hasta 300% de la porosidad inicial de la sal de POM original).
  • Permite una distribución homogénea de la porosidad dentro del núcleo de la matriz sólida.
  • Reduce el uso de metales nobles.
  • Respetuso con el medio ambiente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Mesoporous solids are compounds used as catalysts and also as catalysts support in many chemical reactions.
  
  Catalysts are chemical compounds that increase speed reaction without modifying its own chemical characteristics. Same of them are used in the same phase that reagents and they are called homogeneous catalysts. Other are supported or imbedded in a porous surface, so called heterogeneous or contact catalysts.
  
  Most of the catalysts are extremely environmentally dangerous, as they are based in H2SO4 and HF, or very expensive, as they include noble metal compounds.
  
  In order to solve it, intense research in the latest decades has come up with catalysts based on polyoxometalates (POM). POM are a large family of nanoscale metal-oxide anionic clusters that combine easily with external positive ions to achieve electroneutrality.
  
  Regarding catalysis, POM group based on Keggin molecular structure is the most interesting because it confers them acid properties and great solubility in watery solutions. In that case, positive ions are protons and compound is called heteropolyacid (HPA). It has applications as homogeneous catalysts.
  
  POM can also be used as heterogeneous catalysts when replacing positive ions by cations to obtain the corresponding insoluble salt: the cation combined with the POM determines degree of solubility, thermal stability, acidity and porosity of the salt. These catalysts must provide a great superficial area, i.e. a great number and size of porous to provide a big number of loci to adsorb catalysed reactions.
  
  Nowadays, according to the cation used (ammonium, caesium) specific surface of about 100 m2/g (microporosity) may be achieved, but mesoporosity does not appear or it happens under no control.
  
  The research group has developed a method to obtain mesoporous solids from any kind of POM based salt. Method is quite simple and synthesis reaction, according to the cation used, is controlled by temperature and pH. Leer más
O-777Knowledge Innovation Market / España 1337

Solicitar información>> Compartir tecnología>>
Una nueva generación de suplementos alimenticios para el cartílago

food suplement, cartilage, arthritis, Osteoarthritis, glucosamine, aminoacids, anti-oxidants, chondrocytes
- Descripción de la oferta tecnológica :
  
  Una nueva generación de suplementos alimenticios para el cartílago basado en la glucosamina y los bloques de construcción para el colágeno.
  
  Es el primero de una nueva generación de productos para la mejora de cartílago, dando a los condrocitos las materias primas que necesitan para hacer su función: producir y reparar el cartílago. Contiene: glucosamina, antioxidantes y aminoácidos. Con este producto, la glucosamina encuentra su camino en el líquido sinovial donde migra a través del cartílago a los condrocitos en los que despues se polimeriza.
  
  Los productos existentes estan basados en la glucosamina para el tratar la osteoartritis y sólo tienen un efecto de lubricación y engrase en el cartílago. Con el fin de hacer los productos un poco más sofisticado, condroitina, un derivado de glucosamina, es añadida.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The product combines:
  
  - Glucosamine: building block for glycosaminoglycans. Chondroitin sulphate and hyaluronic acid are derivatives. The formation of gel-forming proteoglycans is the next step. These are then exported from the chondrocytes.
  
  - Amino acids: ready-to-use building blocks for collagen. Chondrocytes will make collagen only if they have the necessary raw materials available. These raw materials are specific amino acids and are small enough to migrate easily through the cartilage in order to reach the chondrocytes.
  
  - Anti oxidants: in order to make the transformation of glucosamine and the amino acids more efficient, the product take away inflammation with strong natural anti-oxidants. Leer más

Proveedor de innovación destacado Laser Consult Ltd.

Sobre Laser Consult Ltd.

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de Laser Consult Ltd.

O-609The Science Park of the of the UC3M / España 1157

Solicitar información>> Compartir tecnología>>
Método de estimación de posición en sistemas de recuperación de información

semantics, statistics, Internet Content Management, Intelligent Applications
- Descripción de la oferta tecnológica :
  
  Un grupo de investigación ha desarrollado un método para estimar la posición de un documento web, en cualquier consulta realizada por un motor de búsqueda en herramientas de recuperación de información. Los motores de búsqueda determinar la relevancia de las páginas web para una consulta determinada. Para ello, utilizan los valores de ciertas características de la página, tales como palabras clave en el título, enlace, etc
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  For a given query and search engine, there are ways to improve the position of a resource respect to competitors. These methods are based on recommendations derived from manual observations, sometimes supported by numerical data obtained by well known analysis tools as SEO (Search Engine Optimization). However, these proposals do not analyze whether the expended effort is in accordance with the resulting improvements, or the used policies are appropriate. These solutions are insufficient because they do not guarantee or predict the position after applying the hypothetical improvements.
  
  The method allows to estimate the ranking of a web resource respect to other web resources resulting from a particular query performed by any information recovery tool, which submit the searching results sorted by preference or relevance criteria.
  
  Another application is to provide, to information recovery tools, the ability to learn how to put in order documents from previous lists already put in order. Thus, an information recovery tool could assign the relevancy degree to each document emulating the underlying behaviour in the example lists. In this line, one possible use is the application in surveillance systems to filter the most valuable resources a priori.
  
  The main features of the method are:
  
  1) Extracting the values of the positioning features that are considered important for our document and other competition documents. Competition documents are those documents related to the query results for the chosen information recovery tool.
  
  2) From the data obtained for the competition documents, we build a model using automatic learning techniques that can discern when a document will be better positioned than another one. Also it is obtained statistical information on their reliability from the construction of a model.
  
  3) From this model, we obtain positioning relationships between our document and each competition document. Statistical information is used to solve inconsistencies. It is determined the most likely position for the document.
  
  Other applications are based on manual observations that do not analyze whether the effort is in accordance with the resulting improvements or followed criteria are appropriate. Either they do not predict the position after applying the hypothetical improvements.
  
  Advantages:
  
  • Automatic positioning estimation
  • It can learn from previous lists already ordered
  • It calculates the order of our document relative to other competitive ones
  • Internal statistical analysis removes inconsistencies Leer más
O-591AMIC innovation centre and CATHETER research group / España 799

Solicitar información>> Compartir tecnología>>
Characterization and quality tests of materials, catalysts, solutions

Characterization, activity tests, materials, nanoparticles
- Descripción de la oferta tecnológica :
  
  Diseño, SÍNTESIS, modificación y caracterización de materiales, nanomateriales, soluciones, catalizadores. Evaluación de la eficiencia, selectividad y del ciclo de vida de estos materiales. El equipo de PhD de AMIC es experto en la síntesis y modificación de diversos materiales como hidrotalcitas, zeolitas, carbón activo, óxido de aluminio, nanopartículas con Ag, Au, Pt, Cu, Pd, Ni. El objetivo de este conocimiento es obtener diferentes aplicaciones en nuevos procesos
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  AMIC owns all kind of equipments to study the properties of the materials;
  X- Ray diffraction, TEM, SEM, physisorption, IR, TPR/D/O, hydrogen chemisorption, microwaves, etc
  AMIC owns also lab pilot plants, in order to simulate and study the reaction required by the client.
  
  In addition to the characterization AMIC offers you the know-how in different materials, with some modification proposals in order to improve your materials. Leer más
O-475University of Alicante / España 937

Solicitar información>> Compartir tecnología>>
Procedimiento novedoso para sintetizar sólidos mesoporosos de forma controlada.

mesoporous solids, carbon materials, environment, polioxometalates, POM, Catalyst, nanoparticles
- Descripción de la oferta tecnológica :
  
  El grupo de investigación “Materiales carbonosos y medio ambiente” de la Universidad de Alicante ha desarrollado un novedoso procedimiento que permite sintetizar sólidos mesoporosos a partir de cualquier sal basada en polioxometalatos (POM) de forma controlada, tanto en volumen como en tamaño. Es un método muy sencillo y eficiente que genera un gran volumen de mesoporosidad homogénea en el seno de las nanopartículas, dando como resultado compuestos que se utilizan como catalizadores y/o soportes de catalizadores más económicos y medioambientalmente menos perjudiciales que los empleados actualmente por la industria química. El grupo de investigación busca empresas interesadas en adquirir esta tecnología para su explotación comercial.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This method is unique in the market and implies a simple procedure to control the volume and size of the mesoporosity developed in POM-based salts. This is possible thanks to the pH increase in solution during the synthesis of mesoporous solids.
  Leer más
O-473University of Alicante / España 1398

Solicitar información>> Compartir tecnología>>
Innovador proceso de fabricación para obtener materiales para la construcción con nuevas funcionalidades

cellular materials, cements, polymers, gels, ceramics, Composites, vitreous materials, Glass
- Descripción de la oferta tecnológica :
  
  Se ha desarrollado un novedoso proceso que permite obtener materiales porosos con aplicaciones en distintos sectores: construcción, aislamiento, nuevas tecnologías, etc. Mediante este procedimiento, es posible crear cavidades independientes en el interior de la matriz de diversos materiales (materiales cementantes, polímeros, geles, materiales cerámicos y composites, materiales vítreos...) sin modificar su composición química. No requiere ningún tipo de maquinaria específica, los costes de producción son muy económicos, el proceso de fabricación es muy sencillo y las propiedades mecánicas y funcionales de los materiales obtenidos aportan numerosas ventajas. Se buscan empresas interesadas en adquirir esta tecnología para su explotación comercial.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Cellular materials are a new and attractive type of materials with remarkable applications in various sectors. The manufacturing process can be applied to polymers, ceramic, cements, glass.
  
  The process consists in the creation of oxygen bubbles within a material by decomposition of hydrogen peroxide, which generates independent cellular cavities within the material. All this is done with the materials and techniques most suitable to generate these cavities in each case.
  Cellular materials consist of a series of connected or unconnected cells or pores.
  Currently, the methods used to obtain cell materials are two:
  
  1. Synthetic foams that are mixed with the material that is intended to become cellular, so that the air bubbles are covered by the foam and the foam by the material. The main disadvantages are:
  
  - Variation of the material chemical composition
  - Foam requires large volumes
  - High structural costs in logistics
  - Special machinery required for both manufacture and handling including high pressure pumps for the foam.
  - In situ production is unviable
  - Complex chemical industry involved
  
  2. Adding aluminium powder and lime to the material that is intended to turn into cellular product so that the reaction produces hydrogen bubbles. The main difficulties are:
  
  - Lime is corrosive and therefore limits the materials to be modified
  - The explosive nature of hydrogen when mixed with air requires adequate facilities for production on a large scale.
  - Variation of the chemical composition of the original material restricts the types of materials that can be used.
  Leer más

Proveedor de innovación destacado University of Alicante

Sobre University of Alicante

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Alicante

O-474University of Alicante / España 968

Solicitar información>> Compartir tecnología>>
Nuevo catalizador que elimina de forma eficiente compuestos orgánicos volátiles clorados en corrientes gaseosas.

Organic compounds, environment research, gas streams, catalysts, dichloroethane, PVC, plastics
- Descripción de la oferta tecnológica :
  
  El grupo de investigación Materiales Carbonosos y Medioambiente de la Universidad de Alicante ha desarrollado un novedoso catalizador que permite eliminar de forma eficiente compuestos orgánicos volátiles clorados (especialmente el 1,2-dicloroetano, tóxico y ampliamente utilizado en distintos procesos industriales) en corrientes gaseosas a temperaturas de trabajo comprendidas entre 250-500 ºC. Estos nuevos catalizadores (óxidos mixtos de cerio-praseodimio) se caracterizan porque tienen un bajo coste de fabricación y son muy activos y estables en el tiempo, ya que no sufren una desactivación catalítica significativa (a diferencia de los catalizadores utilizados en la actualidad). Se trata por tanto de una novedosa tecnología con posibilidades de comercialización a nivel internacional. El grupo de investigación busca empresas interesadas en adquirir esta tecnología para su explotación comercial.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The new mixed oxide catalyst of cerium-praseodymium (CexPr1-XO2) allow the efficient combustion of chlorinated volatile organic compounds (especially 1,2-dichloroethane).
  
  These new catalytic systems are able to work in gas streams at temperatures between 250-500 º C in an dynamic and continuous way without suffering a significant deactivation process.
  
  In recent years, environmental legislation has restricted the air emissions permissible levels, and particularly the emission of volatile organic compounds (VOCs) harmful for both the environment and human health
  
  There is a wide variety of VOCs, of different chemical nature (aliphatic, aromatic, oxygenated and halogenated compounds) and consequence of different emission sources (waste gases from chemical plants, soil and water decontamination, solvents evaporation , etc..), but 1,2-dichloroethane (DCE, C2H4Cl2) is the most lasting, dangerous and commonly used in industry (used, for example, massively in the process of polyvinyl chloride production and consequently chemical plants produce significant amounts of waste that require efficient treatment).
  
  Until a few years ago, VOCs were usually eliminated by thermal incineration. However, new legislation on VOC emissions has originated significant improvements on treatment technologies. This is the case of the catalytic oxidation that in recent years has shown its ability to destroy VOCs at temperatures below those used in thermal incineration and has also produced a significant reduction of secondary pollutants (nitrogen oxides).
  
  Currently, catalytic oxidation processes require heating large gas flows that contain a small amount of VOCs and put the gas in contact with solid catalysts that can either be
  • Those containing noble metals as active phase: they have a excellent oxidation efficiency, although their cost is very high and gradually lose their activity with the presence of chlorine in the reaction mixture.
  
  • Those containing transition metals: they have a lower cost and are more stable and durable, although less active than those containing noble metals. Leer más
O-231GAIKER, Technological Centre / España 1150

Solicitar información>> Compartir tecnología>>
Research and Development Projects R&D

Areas: - Biotechnology- Environment and Recycling - Plastics and Composites.
- Descripción de la oferta tecnológica :
  
  GAIKER-IK4 Technological Centre, is devoted to the up-take of own knowledge and to the development of new technologies that are later transferred to customers coming from sectors such as the Pharmaceutical Industry, Chemical Industry, Human and Animal Health, Engineering and Consultancy Firms, Public Administrations, Automotive Industries, Construction, Packing and Packaging, and Home Appliances, amongst others.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Contract Research and Development Projects R&D
  - Technological Services
  - Tests and Certification
  - Technological Training and Dissemination
  
  Areas:
  - Biotechnology
  - Environment and Recycling
  - Plastics and Composites.
  
  Sectors:
  Pharmaceutical Industry, Chemical Industry, Human and Animal Health, Engineering and Consultancy Firms, Public Administrations, Automotive Industries, Construction, Packing and Packaging, and Home Appliances, amongst others.
  
  Leer más
O-317Laser Consult Ltd. / Hungr 762

Solicitar información>> Compartir tecnología>>
Utilisation of Monori sweet sugar sorghum in order to stabilize and increase biogas production

technology transfer, IP, technology offer, technology request, patent
- Descripción de la oferta tecnológica :
  
  The aim of the technology is the stabilization of the biogas production process utilizing the green stalk of the Monori sweet sorghum plant in relation with biomass, different organic materials, and liquid manure. The sorghum secures primarily the stability of the gas production; it is also suitable for the production of gas in high quantities. The application of sugar sorghum in the case of the before mentioned materials does not only stabilize gas production, it secures a continuous and highly efficient level of gas production. Therefore the operating costs will be highly decreased, the time period necessary for the degradation of the biomass and the harmful influence on the environment will be decreased also.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The offering client is a Hungarian SME. The profile of the company: breeding of forage crops, production and marketing of seed-corn. The company provides German bioplants and research institutes continuously with Monori sweet sorghum, there the sorghum is used for experimental purposes and in operating plants. The company finishes within this area basic and applied research, which resulted in a few innovations relating to the fields of industrial plant cultivation, biotechnology.
  
  The technology can be used within the fields of alternative energy, biogas production. Sorghum belongs, similar to the maize, to the C4 plant family.
  
  The aim of the technology is the stabilization of the biogas production process utilizing the green stalk of the Monori sweet sorghum plant in relation with biomass, different organic materials, and liquid manure. The sorghum secures primarily the stability of the gas production; it is also suitable for the production of gas in high quantities. The application of sugar sorghum in the case of the before mentioned materials does not only stabilize gas production, it secures a continuous and highly efficient level of gas production. Therefore the operating costs will be highly decreased, the time period necessary for the degradation of the biomass and the harmful influence on the environment will be decreased also.
  
  The organic materials will be degraded in an anaerob environment into organic acids and hydrogen. Methanogen bacteriums transform hydrogen into methane, which is one of the components of biogas. The resulting biogas can be used as an energy source. A problem is that the value of the produced gas quantity fluctuates. If one adds to 75 units of biomass 25 units of Monori sweet sugar sorghum, it can be noticed, that during the production of gas 50-60% methane (biogas) will be produced stably. The technology is not in the experimental phase anymore, the technology is working and it is used under industrial conditions too. The Monori sweet sugar sorghum is sensitive to colder climate, but the technology offering company will take on the adaptation of the technology according to the location (stamina; coldness, dryness).
  
  Main advantages:
  The procedure can be applied everywhere, where the aim the stabilization of the gas production is during the degradation of organic materials, biomass. The procedure does not use chemicals, therefore the procedure is eco-friendly. The Monori sweet sugar sorghum can be used for economical biomass production, besides it can be easily processed and utilized for animal feeding and energetical (high output of methane/ha, or for bioethanole production) purposes. 1 kg dry matter produces 480-600 l gas, that means a multiplicator of 1,3 – 2 according to the gas quantity in relation to other plants. The Monori sweet sugar sorghum is applicable for sugar production purposes, because of its high RF sugar content (16,5-18,5%; wherefrom 54,2% saccharose; 9,3% glucose; 12,9% fructose).
  
  Potential users:
  The technology ensures stable gas production in biogas plants, therefore it can be used firstly for biogas plants and biogas plants of agricultural, animal husbandry, food processing companies.
  Leer más
O-323Laser Consult Ltd. / Hungr 1123

Solicitar información>> Compartir tecnología>>
Computer-operated technology for chemical weed control on railroads

technology transfer, IP, technology offer, technology request, patent
- Descripción de la oferta tecnológica :
  
  Computer-operated technology for chemical weed-control on railroads. The technology divides the 7 meter-wide rail track into 9 lanes perpendicular to the rail-track. It can spray out four different types of agents in optional proportions in each lane. The reaction time of the system allows a longitudinal resolution of only 1 meter.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our partner is a successful medium enterprise specializing in weed-control on railroads. Based upon its several years of experience, the company has developed a computer-operated technology for chemical weed-control on railroads detailed below. The company has successfully tested the technology and it is already in use in Hungary on 6,000 km railroad length annually.
  
  The selectivity of the technology
  
  The technology divides the 7 meter-wide rail track into 9 lanes perpendicular to the rail-track. It can spray out four different types of agents in optional proportions in each lane. The reaction time of the system allows a longitudinal resolution of only 1 meter.
  
  The main advantage of the sprayer system
  
  The greatest advantage of the system is that it can conform the environmental interests to the economic interests of the for-profit firm implementing the spraying. The system makes possible the use of technologies developed for the decrease of chemical emission in case of short decay-time post-emergent agents. With this new technology, the short decay-time post-emergent chemical agents that cause less harm to the environment become dominant as opposed to the long decay-time pre-emergent agents. However, this system is also suitable for the traditional total spraying with any kind of chemical agents. The saving on the amount of chemical agents is because of using area-selective,
  species-specific technologies, and because the spraying amount in the technology is proportional to the growth stage of the weed.
  A further advantage of the system is that it can be efficiently used against weed-resistance. Because of resistance, weed colonies often consist of the same resistant species, against which the species-specific, variable agent can be efficiently used.
  
  Weed control train construction
  
  The first weed control train was constructed in 1996, when a hydraulic injector instrument forwarded the herbicides onto water. The operation was manually carried out continuously on the entire width.
  
  According to the operational experiences the spraying unit of the train was modernised introducing a new hydraulic system and computer control focusing on savings in chemical use.
  In 1998 a Pre-Weed Recognition method was applied to recognise weediness on railway tracks and treatment based on this information.
  
  Two years later this was replaced by an ON-LINE Weed Recognition system to eliminate faults caused by differences between recognition and control with fitting in a special camera holder device. On the other hand, an injector valve was also designed parallel with the development of weed recogniser and weed control software resulting in further save in herbicides and more diverse plant protection activity because 4 different chemicals could be injected per treated sections.
  The standard dip angles of railway-embankments proved to be significantly different in practice, so thus the side nozzle system mounted on shaft was designed to be mobile. The operating staff changed the position of the equipment according to visual observance.
  
  In 2003 a new hydraulic system was developed in order to gain more accurate feeding system.
  The firm transferred the control and all devices needed in one section into a module unit (PM-01) using more up-to-date spare parts. These alterations induced the construction of a multifunctional spraying frame (PM-01 spraying frame) alongside which the precise documentation of the operational process was solved (GPS, weediness, etc.).
  
  The firm have implemented electro mechanical developments on the ground detector system (PM-01 spraying frame) and with applying new laser remote indicators the angle variations of the embankment are being tracked by software.
  Furthermore the mobilisation of Weed Recognition system has been solved allowing the examination and documentation of weediness on railway tracks without using the Weed Control Train.
  
  Technical features and data of the new technology
  
  Maximum speed (no spraying): 100 km/h
  Maximum spraying speed: 40-60 km/h
  Minimum spraying speed: 5 km/h
  
  Maximum quantity to spray out: 400 l/ha
  Quantity of chemical agents per hectare: 1 – 10 l with differentiated proportions
  
  Longitudinal resolution: 1 m
  
  Hit rate (coverage): 97%
  
  Storage capacity:
  Clear water: 90,000 liter
  Agent containers: 4 × 3000 liter
  
  Operating distance with full-width spraying: 225 ha, or 351 km
  Operating distance in case of average quantity of weed (approx. 32%): 1053 km
  
  The system adapts to the slope of the railway bed to a maximum of 90 angles.
  Leer más

Proveedor de innovación destacado Operon

Sobre Operon

Portafolio de tecnologías

Política de open innovation

O-264University of Alicante / España 1612

Solicitar información>> Compartir tecnología>>
Procedure for the preparation of polysubstituted pyrrolidines as inhibitors of the hepatitis C virus

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  Highly enantioselective process catalysed by small amounts of a chiral complex formed by a silver(I) salt and a chiral phosphoramidite. This method allows the preparation of enantioenriched Polysubstituted proline derivatives after a three-step sequence. These prolines are widely used for multiple purposes, but the most important activity is based on the high efficiency against the hepatitis C virus. The administration of these drugs in mammalians is beneficial because the risks of the multiple side effects are reduced and the required dose is very small, unlike the mixture of the pharmaceuticals employed in the current therapy. This research group asks for companies ready to acquire this methodology for a future exploitation.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The research group has developed a highly enantioselective process catalysed by small amounts of a chiral complex formed by a silver(I) salt and a chiral phosphoramidite. This method allows the preparation of enantioenriched polysubstituted proline derivatives after a three-step sequence. These prolines are widely used for multiple purposes, but the most important activity is based on the high efficiency against the hepatitis C virus. The administration of these drugs in mammalians is beneficial because the risks of the multiple side effects are reduced and the required dose is very small, unlike the mixture of the pharmaceuticals employed in the current therapy. This research group asks for companies ready to acquire this methodology for a future exploitation.
  
  Main advantages:
  
  1.- The processes are highly enantioselectives. The final antiviral agents are obtained with very good ee’s.
  
  2.- The chemical yields are very good, and the purity of the compounds is very high.
  
  3.- The procedure is efficient and reproducible
  
  Innovation features:
  
  At this moment, this methodology is the unique dealing with the production of these antiviral agents in an highly enantioselective manner. This enantioselective synthesis is very reliable, reproducible and allows to react very bulky starting materials giving high chemical yields. This method is a clear example of the atom economy.
  
  Application areas:
  
  PHARMACEUTICAL COMPANIES > they represent a very promising therapy against the proliferation and development of the virus responsible of the hepatitis C. Their efficiency and biological potential has been demonstrated in infected mice IC50= 0.3-0.5 μM, (even lower according to the new structures published in the literature).
  
  Leer más
O-265University of Alicante / España 1439

Solicitar información>> Compartir tecnología>>
Environmentally friendly holographic recording material

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  new photopolymer which may be used as a holographic recording material. It is easy to prepare in layers of the desired thickness and has a lower potential toxicity than conventional materials. It is characterized by being environmentally friendly, since it does not contain any petroleum-derived solvents or other components classified as toxic, biotoxic, explosive, radioactive, oxidising, corrosive, inflammable or environmentally hazardous, and no such substances are used to prepare it. The only solvent used is water, thus minimizing any risk of contamination and, at the end of its useful life, it is easy to recycle in aqueous phase. It is possible to automatize all the stages of its preparation, and it enables holograms to be obtained in a single stage without the need for subsequent processing.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our research group has developed a new photopolymer which may be used as a holographic recording material. It is easy to prepare in layers of the desired thickness and has a lower potential toxicity than conventional materials. It is characterized by being environmentally friendly, since it does not contain any petroleum-derived solvents or other components classified as toxic, biotoxic, explosive, radioactive, oxidising, corrosive, inflammable or environmentally hazardous, and no such substances are used to prepare it. The only solvent used is water, thus minimizing any risk of contamination and, at the end of its useful life, it is easy to recycle in aqueous phase. It is possible to automatize all the stages of its preparation, and it enables holograms to be obtained in a single stage without the need for subsequent processing. We are looking for companies interested in acquiring this technology for its commercial exploitation.
  
  Markets applications:
  
  This is a light sensitive material used in various optical technologies, in particular as holographic recording material (support for holographic optical elements and holographic memories). Its main applications include:
  
  • Holographic interferometry.
  • Production of three dimensional images for coded labels and security systems.
  • Fabrication of holographic optical elements such as lenses, filters, systems for processing images and optical fibre network intercommunication devices.
  • Holographic data storage .
  • Other applications of photopolymerizable systems: dental treatments, protection of vehicle lights, flexoprinting, etc.
  
  Main advantages of the technology:
  
  • It allows holograms to be obtained by exposure to light in a single stage and without the need for subsequent processing.
  • The material may be covered in totally or partially transparent plastic, before or after obtaining the hologram.
  • It does not contain solvents derived from petroleum or other components classified as toxic, biotoxic, explosive, radioactive, oxidising, corrosive, inflammable or hazardous for the environment (under Commission Directive 2001/59/EC) and no such products are used in its preparation.
  • The material itself and all its components are soluble in water.
  • After its useful life, it may be eliminated by aqueous phase processes.
  • It is compatible with the environment, thereby minimizing any potential risk of contamination.
  • Its fabrication process is completely safe for workers, since water is the only solvent used.
  • The processes of preparing the solution, depositing it in moulds and subsequently extracting it may all be automatized.
  
  Innovative aspects:
  
  • Due to its characteristics and the fact that during the preparation process, its useful life and subsequent elimination, water is the only solvent used, the negative impact of this material on the environment is minimized.
  • It does not contain any components classified as toxic, biotoxic, explosive, radioactive, oxidising, corrosive, inflammable or hazardous for the environment.
  • Although the fabrication process is totally safe for workers, it is possible to automatize all the stages, thereby reducing the production costs.
  • Layers of different thicknesses may be easily obtained and they may be used at different wavelengths.
  
  Leer más
O-267University of Alicante / España 1809

Solicitar información>> Compartir tecnología>>
Solar energy use for water potabilization by electrodialysis

solar energy, Water, water potabilization, electrodialysis
- Descripción de la oferta tecnológica :
  
  Desalination of saline water for human consumption or irrigation by means of systems of electrodialysis powered by photovoltaic solar energy. The main advantages are that it is non-polluting and has a low maintenance cost. The technology is fully developed and useful for organisations dealing with water supply problems. A partner to set up the electrodialysis-photovoltaic system in its facilities and/or carry out feasibility studies is sought.
  
  The developed technologies could be of interest of companies, public bodies and organisations dealing with water supply problems. Companies or institutions interested in profiting water resources which come from brackish water. Users from engineering and industrial companies, waste water management firms, agricultural related companies, etc., could use this technology.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  A Spanish research group owns the know-how for the desalination of saline water for human consumption or irrigation by means of systems of electrodialysis powered by photovoltaic solar energy. The main advantages are that it is non-polluting and has a low maintenance cost. The technology is fully developed and useful for organisations dealing with water supply problems. A partner to set up the electrodialysis-photovoltaic system in its facilities and/or carry out feasibility studies is sought.
  
  Market applications:
  
  The developed technologies could be of interest of companies, public bodies and organisations dealing with water supply problems. Companies or institutions interested in profiting water resources which come from brackish water. Users from engineering and industrial companies, waste water management firms, agricultural related companies, etc., could use this technology.
  
  Innovative aspects:
  
  The desalination system makes use of renewable energy, so it is respectful with the environment and not contributing to the climatic change. Desalination system for remote areas with access to saline reservoirs, where the supply of electricity is particularly expensive or even non-existent, or for coastal zones where there are saline aquifers and the hydric resources are scarce.
  
  Main advantages of the technology:
  
  The system electrodialysis-photovoltaic generator is reliable, versatile and has low maintenance costs. The advantages of the use of the photovoltaic power are that is non-polluting; it is also silent; the fuel-sunlight- is free, abundant and a renewable resource, decentralized; long-life and the low maintenance cost due to the fact that it includes neither accumulation batteries, nor regulators/inverter. Electrodialysis process is more competitive than reverse osmosis process for desalination of brackish water.
  
  Leer más
O-268University of Alicante / España 2461

Solicitar información>> Compartir tecnología>>
Wastewater treatment by electrocoagulation (EC)

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  Removal of pollutants in wastewaters by electrocoagulation (EC). EC could be of interest to Industries that generate wastewater containing oil wastes, dyes, suspended particles, chemical and mechanical polishing waste, organic matter from landfull leachates, defluorination of water, synthetic detergent effluents, mine wastes and heavy metal containing solution.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The Department of Physical Chemistry (Applied Electrochemical Group LEQA) at the University of Alicante has a high experience and know-how to develop and carry out the removal of pollutants in wastewaters by electrocoagulation (EC).
  
  A pilot plant fully equipped with the necessary infrastructure and with ability to treat 100L/h of wastes is available in order to develop the pre-industrial phase and scaling-up of these processes.
  
  This technology could be of interest to several industries: chemical, tannery, textile, etc.
  
  Market applications:
  
  EC could be of interest to Industries that generate wastewater containing oil wastes, dyes, suspended particles, chemical and mechanical polishing waste, organic matter from landfull leachates, defluorination of water, synthetic detergent effluents, mine wastes and heavy metal containing solution.
  
  Main advantages of the technology:
  
  1. EC requires simple equipment and is easy to operate.
  2. Sludge formed by EC is easy to dewater. Also, EC produces low quantity of sludges.
  3. Flocs formed by EC are similar to chemical floc, except that EC flocs contain less water, are and more stable, and therefore, can be separated faster by filtration.
  4. The EC process has the advantage of removing the smallest colloidal particles, because the applied electric field sets them in faster motion, thereby facilitating the coagulation.
  5. The gas bubbles produced during electrolysis can carry the pollutant to the top of the solution where it can be more easily removed.
  
  Innovative aspects of the tecnology:
  
  - The EC cell is controlled electrically and have no moving parts, thus requires less maintenance
  
  - The EC process avoids uses of chemicals and so there is no problem of neutralizing excess chemicals.
  
  - EC produces effluent with less total dissolved solids (TDS) content as compared with chemical treatments.
  
  Leer más

Proveedor de innovación destacado Environmental and Industrial Catalysis Applications

Sobre Environmental and Industrial Catalysis Applications

Portafolio de tecnologías

Política de open innovation

O-269University of Alicante / España 1217

Solicitar información>> Compartir tecnología>>
Weighted suit to enhance muscle development

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  The research group has developed a weighted suit that enhances muscle development. It is very simple: it improves ergonomics, avoids rubbing, it is easy to use (the suit can be worn throughout the day) and is designed to avoid injuries and pathologies and increase training time. The suit has weighted segments arranged proportionally over all the different parts of the user’s body (the exact arrangement is determined by personalised anthropometric studies).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The research group has developed a weighted suit that enhances muscle development. It is very simple: it improves ergonomics, avoids rubbing, it is easy to use (the suit can be worn throughout the day) and is designed to avoid injuries and pathologies and increase training time. The suit has weighted segments arranged proportionally over all the different parts of the user’s body (the exact arrangement is determined by personalised anthropometric studies). The group is seeking companies interested in acquiring and using the technology.
  
  Markets applications:
  
  SPORTS CLOTHING: The suit enhances muscle development of elite sportsmen and women who wish to obtain maximum performance in the least possible time, without causing injuries or pathologies of any kind.
  
  Main advantages of the technology:
  
  • Simple construction.
  • Improved ergonomics.
  • Avoids rubbing.
  • Easy to use (the user wears the suit throughout the day).
  • Does not cause injuries or pathologies.
  • Gains training time.
  • Enhances muscle development without a conscious effort.
  
  Innovative features:
  
  The suit is fitted with weighted segments arranged proportionally over the different parts of the user’s body, leaving the head, hands, feet and main joints free. Each segment is allocated a greater or lesser load according to the user’s needs and the activity to be carried out. The arrangement of the weights is determined by personalised anthropometric studies using the Marfell-Jones methodology. The suit is ergonomic and avoids rubbing, is easy to use (it allows muscle development while the user is not training, thus saving time) and, most importantly, does not cause injuries or pathologies.
  
  Leer más
O-270University of Alicante / España 1197

Solicitar información>> Compartir tecnología>>
Know-how in adhesives, joining of materials and adhesion processes

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  The Adhesion and Adhesives Laboratory of the University of Alicante has a broad experience in the formulation, modification and rheology of adhesives (contact adhesives, hot melts, thermosets, PSAs). The main activities of the laboratory deal with the understanding and the improvement of adhesion processes in several research and industrial fields, mainly the footwear, toys, natural stone, surgery practice and packaging
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The Adhesion and Adhesives Laboratory of the University of Alicante has a broad experience in the formulation, modification and rheology of adhesives (contact adhesives, hot melts, thermosets, PSAs). The main activities of the laboratory deal with the understanding and the improvement of adhesion processes in several research and industrial fields, mainly the footwear, toys, natural stone, surgery practice and packaging
  
  Experience:
  
  1.- Surface modification of polymers and rubbers to improve their adhesion properties.
  2.- Modifications of adhesives
  3.- Thermoset adhesives:
  
  (For more details please see the attached document)
  
  Research fields of interest:
  
  - Surface treatment of polymers and rubbers in the footwear industry.
  
  - Surface modifications of plastics and polymers in the toy industry.
  
  - Metallization of plastics.
  
  - Rheological properties of adhesives containing fillers.
  
  - Painting of poliolefins.
  
  - Development of acrylic adhesives for medical applications.
  
  - Development of thermoset coatings for marble and natural stones.
  
  - Synthesis of thermoplastic polyurethane adhesives for footwear.
  
  - Surface modification to mechanical reinforcement and improved adhesion of leathers.
  
  - EVA based hot melt adhesives for packaging.
  
  - Tackifiers in PSA adhesives.
  
  (For more details please see the attached document)
  
  Projects under development:
  
  - Improvement of the Adhesion of SBR, SBS, EVA by Low Pressure Gas Plasma Surface Treatment.
  
  - Surface Properties vs Rheological Properties of Adhesives: Influence in the Adhesion and Performance of Adhesives in Packaging and Footwear.
  
  - Use of Marble Processing Residues as Filler in Unsaturated Polyester Resins for Floor Tiles Reinforcement.
  
  - Treatment of Natural Stones with Epoxy Resins to Improve their Impact and Flexion Resistance.
  
  - Surface Treatment with Corona Discharge of Elastomeric Polyolefins to Improve their Adhesion to Paints.
  
  - Development of a Water-Based Surface Treatment for Rubber Soling Materials.
  
  - Protection of Beida Cream Limestone Through Organic and Inorganic Coatings.
  
  - Addition of Natural Ultramicronized Calcium Carbonate to Hot Melt Adhesives.
  
  - New Acrylic Formulations to Seal Cornea.
  
  - Metallization of Plastics.
  
  - Contact Angle Measurement in Painted Metallic Panels.
  
  - Preparation and Improvement of the Paint Adhesion to Elastomeric Polyolefins Prepared by Rotation Molding.
  
  - Development of a Water-Based Leather Treatment for Footwear.
  
  - Consulting and Technical Assistance in Adhesives Joints in Ceramic, Building, Wood, Textile, Marble, and Toy Industries.
  
  Leer más

1 2

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Otros : Oportunidades ... | Ofertas

Otros : Oportunidades ... | Ofertas

amination, amine, Chiral, chiral amine, petrochemical, fine chemical, agrochemicals, pharmaceutical compounds, olefins, aryl, alkene, esters, asymmetric allylic

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology

neurology, Alzheimer, immune, immunology, immune health, autoimmune, Autoimmune diseases, nutraceuticals, brain health

Material science, ion lithography, photonics, medicine, energy, lens, planetary science, microelectronics, astronomy, archeology, nanotechnologies, physics, ion beam, ions

Legionella, risk, fast test, Water

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid

fermentation, Biorreactor, Pilot Scale, filtration, centrifuge, Protein production, Cell disruption

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests

Hundreds of hybridomes that are now producing Monoclonal Antibodies (MAb's) in ascites in cell culture. During these years, OPERON has developed its own MAb's that are currently used in many successful IVD tests around the world.

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests

IVD tests, NAT tests, ELISA, Immunochromatography, Antibodies, PCR, Lateral Flow, Diagnostic tests

Integral solution for rapid tests (lateral flow) design & manufacturing problems and allows the achievement of the CE mark in the client's commercial In Vitro Diagnostic tests.

MODULAR PLASTIC PALLETS, plastic pallets, pallets, pallet, logistics, ecopalet, exporters, Warehouse, land transport, Manufacturing

osteoporosis, osteopenia, calcium, bone, bone density, bone metabolism, nutritional supplements

Pectus Excavatum, Pectus Plate, Pectus UP, medical devices, Design & Production Engineering

inspection vision, visual automatic, agrofood industry, quality control

food suplement, cartilage, arthritis, Osteoarthritis, glucosamine, aminoacids, anti-oxidants, chondrocytes

semantics, statistics, Internet Content Management, Intelligent Applications

Characterization, activity tests, materials, nanoparticles

mesoporous solids, carbon materials, environment, polioxometalates, POM, Catalyst, nanoparticles

This method is unique in the market and implies a simple procedure to control the volume and size of the mesoporosity developed in POM-based salts. This is possible thanks to the pH increase in solution during the synthesis of mesoporous solids. Leer más

cellular materials, cements, polymers, gels, ceramics, Composites, vitreous materials, Glass

Organic compounds, environment research, gas streams, catalysts, dichloroethane, PVC, plastics

technology transfer, IP, technology offer, technology request, patent

technology transfer, IP, technology offer, technology request, patent

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

solar energy, Water, water potabilization, electrodialysis

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

Usuario nuevo (registro gratuito)

Usuario registrado

This method is unique in the market and implies a simple procedure to control the volume and size of the mesoporosity developed in POM-based salts. This is possible thanks to the pH increase in solution during the synthesis of mesoporous solids.
Leer más