Innovación en Aerospacio y defensa : Oportunid...

O-1160University of Louisiana at Lafayette / Estados Unidos 969

Solicitar información>> Compartir tecnología>>
Método para la preparación de temperatura ambiente de Titania nanoesferas magnéticas recubiertas y otros Nanoestructuras

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal
- Descripción de la oferta tecnológica :
  
  El dióxido de titanio (óxido de titanio) es uno de los productos químicos más demandados del mundo debido a su alta versatilidad de uso. Investigadores de la Universidad de Louisiana en Lafayette han desarrollado un método para la preparación de compuestos, nanoesferas compuestas de un núcleo de ferrita de níquel y que tiene una cáscara de dióxido de titanio (óxido de titanio) con actividad fotocatalítica y germicida. Esta tecnología utiliza una metodología química micela inversa patentada que no requiere maquinaria cara o temperaturas elevadas. (Ref. US7504130, US7964013, US8197890, US7635518).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Permits 100% titania availability and minimizes nonavailable, internal titania waste (in contrast to mixed
  titania / ferrite composites);
  • Modified reverse micelle chemistry is performed at room temperature and without the need for
  expensive machinery;
  • Permits removal of titania nanoparticles from liquid solutions and environmental sources (a current EPA concern) via magnetic manipulation;
  • Demonstrated germicidal and photocatalytic coating for industrialand biomedical uses;
  • Reusable means of decontamination, chemical reduction (N2 & CO2) and catalysis;
  • Other preferred applications of this technology include custom shaped magnetic nanorods
  (US8197890, US7635518) and nanospheres for ultrahighdensity storage media (US7964013). Leer más
O-851University of La Laguna / España 1489

Solicitar información>> Compartir tecnología>>
Herramienta para apretar tuercas operando en espacios reducidos

tool, tightening nuts, confined spaces, nut
- Descripción de la oferta tecnológica :
  
  Este es un diseño que permite construir una "continuous adjusting open end wrench". El dispositivo es útil en situaciones en las que una llave de tubo o una llave de extremo cerrado no puede ser utilizada. Este es generalmente el caso para las tuercas que deben moverse a lo largo de los tornillos sin acceso a los extremos de los pernos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  It is a well known fact that the smallest angle an open end wrench needs to allow moving a bolt is 30 degrees. The wrench is positioned over the nut, it is rotated 30 degrees, the wrench has to be removed and rotated over its own axis 180º and placed again over the nut to allow a further 30º movement. This is a time consuming procedure.
  
  Fixed and adjustable ratcheting open end wrenches are available in the market. These tools do not have to be removed and rotated 180º over its own axis. Nevertheless they have to be moved back and forth and when the nut needs a long run over the bolt, the procedure is time consuming.
  
  The tool presented here has the main advantage that can be motorized, connected to an air compressed ratchet or a manual ratchet. The rotation direction can be changed externally without removing the tool. The tool is not adjustable. It has the same width as an adjustable wrench for the bigger nut it can handle. Smaller nuts can be handled by placing an add on piece.
  A metal clip is introduced to keep the nut centered with the rotation axis. Once the user gets accustomed with the tool, the clip is not longer necessary. The internal mechanism has a pending european patent and can be transferred. Leer más
O-1158University of Louisiana at Lafayette / Estados Unidos 514

Solicitar información>> Compartir tecnología>>
Proyectiles Munición Hybrid-luminiscentes (Low Observable rastro Municiones)

Munition, ammunition, LOT, trace, triboluminescent, photoluminescent, luminescent
- Descripción de la oferta tecnológica :
  
  Esta invención se refiere a material luminiscente utilizado en proyectiles municiones y sus métodos de fabricación. Más particularmente, la invención se refiere a materiales luminiscentes que son fotoluminiscente o triboluminescent. La tecnología descrita aquí ofrece permisos de luminiscencia específica y única para el tirador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The photoluminescent and triboluminescent material can be placed at various locations on the projectile. In one configuration, the triboluminescent material that gives off light when the projectile impacts the target. In another configuration, a photoluminescent material provides a during flight and the triboluminescent material provides identification of target impact. In another configuration, the triboluminescent material is used to provide both the ballistic trace and the impact identification. Methods of making the hybrid luminescent ammunition are also provided. Leer más
O-610AIR PRODUCTS AND CHEMICALS / Estados Unidos 2658

Solicitar información>> Compartir tecnología>>
El líquido de Hidrógeno de almacenamiento tiene 3 veces la densidad de energía de las baterías de ión de litio.

Hydrogen, Storage, Fuel Cell, Fuel, energy
- Descripción de la oferta tecnológica :
  
  Este líquido de hidrógeno de almacenamiento se vierte y se almacena con la comodidad de los combustibles líquidos, sin embargo es tan inflamable como la madera. Almacenando tanto hidrógeno como el hidrógeno licuado en sí, esta tecnología permite que haya productos capaces de ofrecer alta potencia y larga duración para dispositivos electrónicos portátiles, dispositivos especiales, sillas de ruedas, vehículos aéreos no tripulados hasta el almacenamiento de energía a escala de redes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This product delivers hydrogen with an extra degree of safety directly to fuel-cells on-demand. New designs are enabled since this "Liquid-Carrier for Hydrogen" is stored in tanks of any shape. The economics of this system have been validated by DOE and is among the least expensive methods of high-volume hydrogen storage. When loaded with hydrogen from renewable sources this technology delivers a complete green solution since the carbon portions of the molecules are completely re-used. With a well-to-wheels efficiency comparable to gasoline or EVs, this technology can deliver world-class efficiency. Leer más

Proveedor de innovación destacado University of Dundee

Sobre University of Dundee

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Dundee

O-764University of La Laguna / España 1923

Solicitar información>> Compartir tecnología>>
Cámara 3D en tiempo real: método y cámara para la adquisición en tiempo real de información visual de escenas tridimensionales

3DTV, hollography, 3D images, metrology, 3D microscopy, Oftalmology, 3D laparoscopy, 3D surgery
- Descripción de la oferta tecnológica :
  
  La invención se refiere a un método para el cálculo de la pila focal asociado con un espacio de objetos de la función plenoptica de los mismos, utilizando una "sum transform" a lo largo de la longitud de los planos limitados en hipercubos discretos, lo que permite que el tiempo de cálculo se reduzca considerablemente. La invención también se refiere a un método para aumentar la resolución de la pila focal obtenida. Además, la invención se refiere a dos métodos para la recuperación en tiempo real de las profundidades y módulos y fases de la amplitud compleja del frente de onda, respectivamente, en cada posición de las superficies de una escena tridimensional, y un sistema adaptado para llevar a cabo los métodos mencionados anteriormente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The acquisition method involves calculating the focal stack associated with an object space from the plenoptic function of the object space, using a sum transform along the length of constrained planes in discrete hypercubes. The resolution of the obtained focal stack is then increased. Real-time recovery of the depths and moduli and phases of the complex amplitude of the wavefront is also performed in each position of the surfaces of a three-dimensional scene. Leer más
O-832UATEC - Technology Transfer Office of University of Aveiro / Portugal 1722

Solicitar información>> Compartir tecnología>>
Nuevo sistema de protección contra impactos balísticos y "blast-waves" generadas por explosiones

Ballistics, protection system, cork
- Descripción de la oferta tecnológica :
  
  Un grupo de investigadores ha desarrollado un nuevo sistema de protección contra impactos balísticos y explosiones. Se basa en una estructura en sándwich hecha de capas de corcho interiores, composites o material cerámico, y capas externas de material metálico o composite. Puede ser utilizado en vehículos y en sistemas de protección personal, y en la construcción y en sistemas de protección de otras infraestructuras .
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The new developed system finds a new application for a traditional material, leading to a new solution. This new solutions is substantially lighter than the protection systems that exists at present. In addition, it is notoriously different from other available systems, because it is a multilayer system. Leer más
O-1103ARETE RESEARCH CONSULTANTS / Estados Unidos 622

Solicitar información>> Compartir tecnología>>
Soluciones oportunas y rentables mediante CFD, análisis térmico, y el modelado y simulación para la industria aeroespacial y de defensa, energía, y la biotecnología.

programming, consulting, thermal analysis, modeling and simulation, CFD, Computational Fluid Dynamics
- Descripción de la oferta tecnológica :
  
  Oportunas y rentables soluciones de análisis a los sectores aeroespacial y de defensa, energía, y los campos de la biotecnología. Contamos con las técnicas de modelización avanzadas para satisfacer sus necesidades de análisis para apoyar todas las fases de su desarrollo de productos: desarrollo del concepto inicial de diseño, optimización y análisis de fallos. Somos expertos desarrolladores y usuarios de herramientas de análisis avanzadas, tales como la dinámica de fluidos computacional (CFD) y análisis térmico.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  We provide an innovative approach to meet your analysis needs, and work with you at all stages of your design to fully understand your problem. Since we are a US based company and only employ legal US residents, we are able to conduct analysis where ITAR restrictions are of issue. Our team is composed of highly experienced subject matter experts and we use state-of-the art modeling tools. Leer más
O-1054Advanced Alternative Energy Corporation / Estados Unidos 3976

Solicitar información>> Compartir tecnología>>
New technology for conversion of low-value biomass to higher value end products

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid
- Descripción de la oferta tecnológica :
  
  A scalable and multifaceted energy and fuels processing technology providing for conversion of diverse low-value biomass, by products and wastes to higher value energy products has been invented, patented and developed. The technology is highly adaptive and the processes available are high yielding.
  
  An industrial, SME, larger company, or institutional or academic partner is sought for pursuing the joint venture development of various applications of this universal cleaner energy technology, and follow on commercialization. The subject technology is also available for licensing and/or joint development and commercialization outside the U.S.A.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Low value biomass is readily available from the many non-edible fractions of various food crops and this resource is widely produced at large scale, and is often found to be locally available and often extremely cheap as it is a by-product that does not require any additional planting, cultivation, harvesting, fertilizer or chemicals for weed and pest control. Thus it is simply a byproduct that is available for conversion along with dedicated fuel crops and municipal wastes to higher value products and is well suited for cleaner low cost sustainable energy production on the farm and/or in nearby communities. Leer más

Proveedor de innovación destacado University of Seville

Sobre University of Seville

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Seville

O-1037empresa anónima / Ucrania 1230

Solicitar información>> Compartir tecnología>>
Protección Nuclear con tejido de algodón

nuclear, smart textiles, Nuclear protection, nuclear protection fabric, nuclear power plants, nuclear power, nuclear medicine, oncology, medical devices, millitary
- Descripción de la oferta tecnológica :
  
  La tecnología permite el uso de algodón en el tejido de protección nuclear con mejores características que sus análogos. Los componentes que se utilizan en el tejido de algodón se podrían introducir en masas de plástico como un material de carga, en este caso el indicador de protección se puede aumentar considerablemente. Mi desarrollo se basa en el tratamiento especial de la tela. El desarrollo se ajusta a todos los requisitos necesarios.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Technology allows to use cotton in the nuclear protection fabric with better characteristics then analogues. And the components which are used in the cotton fabric might be introduced into plastic masses as a filler; in this case the protective indicator can be considerably increased. My development is based on the special fabric's treatment. The development conforms to the all necessary requirements. The fabric doesn’t contain lead. Leer más
O-1025University of Burgos / España 815

Solicitar información>> Compartir tecnología>>
Materiales para diseño. Modelado multiescala para el diseño previo de nanomateriales

Multiscale modelling, computed aided engineering, materials design, materials genome, Nanomaterials
- Descripción de la oferta tecnológica :
  
  Investigadores de la Universidad de Burgos han desarrollado una metodología única que combina las herramientas de cómputo, software, tecnología de la simulación y nuevos métodos para la caracterización de materiales, con el fin de proporcionar una predicción anticipada de las propiedades de los materiales. Seguimos un enfoque multi-escala que oscila en los tamaños y los plazos de la información atómica o nanométrica para aplicaciones particulares precisas ingeniería.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This technology allows development of open standards and databases that will make the process of discovery and development of advanced materials faster, less expensive, and more predictable by unifying computational tools, simulation technology and material characterization. The best solution for any engineering problem is provided. Leer más
O-1035Grupo de Transductores Químicos - GTQ IMB-CNM (CSIC) / España 574

Solicitar información>> Compartir tecnología>>
Sistema óptico portátil multiparamétrico para contar y/o analizar partículas orgánicas (microorganismos) y partículas suprananometricas inorgánicas

optical system, analysing organic, analysing microorganisms, inorganic suprananometric particles, portable photonic analysis system, single/multi-parameter measurement, real-time analysis, Micro-opto-fluidics detection, spectrophotometers, ELISA readers, flow cytometry equipment, microorganisms, Microbiology, laboratory
- Descripción de la oferta tecnológica :
  
  Hemos desarrollado un sistema portátil de análisis fotónico para la medición de single/multi-parámetro mediante la combinación de un sistema desechable "microoptofluidic" acoplado a una fuente de luz de banda ancha y una configuración de lectura espectral. Se puede utilizar para el recuento y el análisis (con o sin etiquetado) de cualquiera de las partículas suprananometric orgánicos (microorganismos) o inorgánicos. Estamos buscando empresas para licenciar la patente y colaborar en el desarrollo de aplicaciones.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Multiparametric
  
  Parameters can be determined in milliseconds and simultaneously by the three regimens used for analysis, detection and counting of particles: scattering, absorption and scattering + absorption. This allows obtaining the photonic fingerprint of the particles and deploys new detection systems and real-time analysis. Leer más
O-1015Rovira i Virgili University (URV) / España 572

Solicitar información>> Compartir tecnología>>
Detector de potencia y método para mejorar el margen de estabilidad de los convertidores de potencia de conmutación

switching power converter, power converters, voltage-sensing circuit, power management, energy management, battery, batteries, portable devices, energy harvesters, consumer electronics
- Descripción de la oferta tecnológica :
  
  Se han desarrollado y patentado una estructura de detección de voltaje para convertidores de potencia de conmutación y un método para mejorar el margen de estabilidad. Se buscan socios para desarrollar aún más el sistema y / o establecer acuerdos comerciales, junto con la cooperación técnica.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Innovative technique for controlling fast-scale instability based on narrowband amplifying the harmonic at the switching frequency. While prior art techniques were based on delay-cell-based complex circuits (and analysis), this technique is based on a simple circuit and it can be described and designed by means of a frequency domain analysis.
  
  Simple and compact circuit, easily implementable and on-chip amenable, that tackles the control of fast-scale instabilities while concurrently providing output power ripple reduction, thereby extending the design space to better fit typical specifications of on-chip switching power converters. The simplicity of the circuit compared to previous proposed topologies facilitates its potential implementation in an integrated power management IC. Leer más

Proveedor de innovación destacado University of Aveiro - UATEC

Sobre University of Aveiro - UATEC

Portafolio de tecnologías

Política de open innovation

Portafolio tecnológico de University of Aveiro - UATEC

O-1020Atlanta Marketing Consultants / Estados Unidos 1128

Solicitar información>> Compartir tecnología>>
Hybrid Fuel Cell System With Smart Power Electronic Technology

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy
- Descripción de la oferta tecnológica :
  
  The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Key Advantages of GEI-X5 Power Solution include:
  
  • Independent of the hydrogen infrastructure and do not require pure hydrogen for electric power production (able to operate on any carbon based fuel including biogas)
  • Use locally available carbon based infrastructure fuels employing a fuel reforming system that is 50% smaller than traditional fuel reforming systems with a 30% increase in power density (kW/liter).
  • Results in a 40%+ reduction in fuel consumption with the GEI-X5 HTPEM vs. diesel electric generators
  • Reduces harmful CO2 greenhouse gas emissions by 80% as compared to diesel electric generators
  • Provides silent power generation and multi-fuel diversity (critical for military applications).
  • Leverages a Common Technological Infrastructure (CTI) allowing adaptable and reconfigurable electric power output across multiple application domainareas with a common fuel cell stack infrastructure.
  • Incorporates a proprietary bi-polar plate flow field design which increases power density for use with reformed fuels
  • Hybrid fuel cell system containing a lithium battery allowing for more efficiency than straight fuel cell systems
  • Scalable system enabling for a wide range of renewable energy applications
  • Compatibility and ability to enhance the performance of other power technologies such as solar, wind, etc...
  • One button start
  
  CUSTOMER PROBLEM (Prior To GEI)
  
  Fuel cells are a highly efficient, combustion-less, and virtually pollution free energy source which provide electricity to power a wide array of applications including buildings, electric grids, trucks and automobiles, emergency back-up systems, laptop computers, and numerous other consumer devices. In principle, a fuel cell is an electrochemical device that operates like a battery. However, unlike a battery, a fuel cell requires re-fueling, and not recharging. A fuel cell uses fuel — usually hydrogen extracted from natural gas, propane, or other carbon based fuels, and oxygen extracted from air — to produce electricity. Fuel cells will continue to produce energy in the form of electricity and heat as long as there is a constant fuel source. Hydrogen fuel cells work simply, have no moving parts, and operate silently with water and excess heat as the only by-products.
  
  GEI High Temperature PEM (HTPEM) fuel cells operate at 160-180C. The HTPEM higher operating temperatures allow the use of non-pure hydrogen as a fuel while maintaining the cost and expanding the application flexibility benefits of low temperature PEM fuel cells.
  
  The specific benefits include:
  
  1) More efficient use of thermal energy or by-product heat used in a combined heat and power application resulting in high system efficiencies;
  
  2) Reduction of balance-of-plant (BOP) components for cooling, water management and purification resulting in reduced maintenance and simpler operations and controls;
  
  3) When using reformed fuels rather than pure hydrogen, the result is increased tolerance to carbon monoxide (by a factor of 300) which can poison LTPEM systems. The ability to use non-pure hydrogen reduces the equipment and capital cost necessary to remove fuel impurities.
  
  The resulting triad of benefits listed above result in a simpler yet compact and robust design which requires no humidification with high fuel flexibility and lower cost, yielding significant competitive advantages for commercial HTPEM fuel cell power systems. When HTPEM's are integrated with fuel reforming technologies, the combined heat and power fuel processing system is very efficient, with a high power/weight ratio, and represents the optimum technology for on-board reforming of military JP8 diesel,synthetic fuels, and locally available infrastructure fuels. The GEI HTPEM power generation and fuel reforming technology represents the optimum balance between the cost and availability of low temperature PEM fuel cells, and the high temperature fuel impurity tolerance of much higher temperature (800C+) fuel cells.
  
  The result is a game changing power technology which out-performs solar, wind, geothermal, hydro-electric, coal, and other power solutions from a cost and an efficiency standpoint while also being able to enhance the performance of these power solutions.
  The GEI Hybrid fuel cell system(Combining a lithium battery and fuel cell) is also equipped with state of the art electronics (making it a smart system which is able to communicate real time for monitoring and adjustment purposes). Leer más
O-1002Centro Tecnológico Ascamm / España 807

Solicitar información>> Compartir tecnología>>
RECAT, nuevo catecol derivado con recubrimiento hidro/oleofóbico

Coatings, coating, stain treatments, plastics, hydrofobic, oleophobic, catechol, metals, plastics
- Descripción de la oferta tecnológica :
  
  Nuevo proceso para la obtención de recubrimientos capaz de proporcionar propiedades hidro-oleofóbicas a una amplia variedad de sustratos tales como textil, plástico, metal, etc, utilizando técnicas de inmersión lo que reduce los costes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  With the catecholic functionalization it is possible to add hydro-/oleophobic properties to the coating (functionalization can be also used in obtaining other properties such as biocides, etc.) and adhesion capability to a wide variety of substrates such as textile, plastic, metal, etc. Leer más
O-1003Ascamm / España 671

Solicitar información>> Compartir tecnología>>
EBIT, nueva tecnología para la fabricación de piezas de plástico huecas.

technology, innovation, integration, blow, extrusion, Plastic, molding
- Descripción de la oferta tecnológica :
  
  EBITTM (tecnología de moldeo de inyección por extrusión y soplado) es una tecnología completamente desarrollado en España que, en un solo paso (proceso y herramientas), se unen el moldeo por extrusión y soplado, el moldeo por inyección de tecnologias termoplásticas y técnicas avanzadas de control mediante el uso de sistemas embebidos y mecatrónica . Esta avanzada tecnología de fabricación permite la producción geométrica de complejas tridimensionales partes huecas de plástico con estructuras adjuntas y conectores integrados.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  While conventional processes require, at least, three independent processes for the production of a piece - (1) the main body (usually large) by extrusion blow molding, (2) additional or auxiliary components by other processes such as injection molding and, finally, (3) the welded joint or manual clipping between the main body and the part/s obtained by injection - EBIT combines all these technologies into a single integrated transformation process, obtaining highly competitive parts with high added-value and quality. Leer más
O-1001Ascamm / España 639

Solicitar información>> Compartir tecnología>>
Sonoplast: tecnología de inyección ultrasonido en termoplástico para la fabricación de componentes de plástico micro y mini tamaño.

ultrasound thermoplastic injection technology, injection technology, plastic components, plastics, microinjection, plastc molding, molding, molding industry plastic, thermoplastics, micro-molding machines, micro moulding, mini moulding, thermoplastic microinjection machine, welding, cutting
- Descripción de la oferta tecnológica :
  
  Sonorus es una máquina de fácil mercado que ofrece un concepto totalmente nuevo de microinyección, en el que las ondas ultrasónicas se utilizan como la fuente principal de energía para el mini moldeo y micro componentes. Esta tecnología permite fundir cantidades reducidas de material termoplástico y llenando las cavidades en el molde. Debido a la transmisión de vibraciones obtenidos por ultrasonidos, la presión aplicada se reduce significativamente en comparación con otras máquinas de microinyección convencionales.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  While other micro-molding machines simply adapt the concepts used in conventional injection molding processes, Sonorus 1G has been specially designed for manufacturing above quality standard micro and mini scale components, by using energy efficient ultrasounds.
  
  Furthermore, the operation of this new technology involves a smaller number of control variables than those used for conventional microinjection, allowing to improve the quality of parts produced.
  Sonoplast technology, developed in Spain, has been conceptualized in the machine Sonorus 1G, the first high precision thermoplastic microinjection machine based on ultrasounds. The machine is available in the market since 2011.
  
  The industrial application of high frequency ultrasounds is currently focused in only some applications such as welding, cutting, cleaning or discrete mass, mixing and componding, etc. Our product is a real revolution for the molding industry plastic.
  
  Sonorus is a compact size machine (between 1-2 tons) with minimal noise emission level. Its main advantages are:
  
  - Higher quality of the final piece: The high accuracy of Sonorus allows to obtain excellent finish end pieces.
  - Reduced costs: Significant energy savings (around 40%) derived from the integration of ultrasonic device as a system of merger and reduced material waste (around 50%).
  - Increased speed of production: Lower cycle time than conventional machines down to 3 seconds.
  Leer más

Proveedor de innovación destacado University of Dundee

Sobre University of Dundee

Portafolio de tecnologías

Política de open innovation

O-988Gaiker, Technological Centre / España 1758

Solicitar información>> Compartir tecnología>>
Nuevo e innovador revestimiento anti-arañazos puede ser utilizado en sectores diferentes, como automóviles, muebles ...

antiscratch, Automotive, Construction, Antifouling, clear coating formulatio, nanoparticles, antibacterial
- Descripción de la oferta tecnológica :
  
  Nuevo e innovador revestimiento resistente a los arañazos con excelente:
  - Retención de brillo después de la abrasión
  - Aspecto estético
  - Principalmente brillo
  - transparencia
  - Funcionalidades adicionales podrían sumarse de acuerdo a sus especificaciones o requisitos
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  These systems have enhanced scratch resistant properties compared to the commercial systems.
  
  Also coatings with self healing properties, enhanced fire reaction or intumescent properties can be formulated.
  
  The application technology for all these systems is the conventional one for coatings, it is no needed investment in new machines or special robot for the application.
  Leer más
O-982Gaiker, Technological Centre / España 797

Solicitar información>> Compartir tecnología>>
Nuevo e innovador preimpregnado más ligero, con propiedades mecánicas mejoradas, y buena resistencia al fuego

prepreg, thermoset, thermoset materials, thermoplastic, railway OEM, Construction, automotive OEM, shipyard, resins, resin, intumescent coatings, Coatings
- Descripción de la oferta tecnológica :
  
  Desarrollo y formulación de una nueva preimpregnación con propiedades mecánicas mejoradas. Con nuestro preimpregnado es posible transformar y obtener piezas de moldeo a baja presión. Los costes de fabricación de moldeo son bajos y la presión requerida es también baja, por lo que hay costes de inversión más bajos que los procesos convencionales. También es un buen material y proceso para la producción de alto volumen.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The investment cost is lower that with other technologies, lower cost of the mold and lower cost of the machines it is possible to work at low pressure compression.
  Prepreg that could be combinated with:
  - Nanotechnology in order to improve materials properties like fire behavior, impact resistance, mechanical properties, coating…
  - Materials with low environmental impact and use of recycled materials
  
  Characterization of the material, mechanical properties higher than convetional ones, and good fire resistant to fire according to
  Regulation:
  - Construction sector: EN 13501-1
  - Transport sector: CEN TS 45545-UNe 23727-90-NF F16101-Directive 95/28/CE
  - Electric and electronic sector: EN ISO 4589-EN ISO 60695-2 – EN 50267
  Mechanical properties:
  Bending resistance: 300 MPa. Bending modulus: 15.000 Mpa. Impact resistance: 90Kjoules/m Leer más
O-955BioIntraface, Inc / Estados Unidos 1853

Solicitar información>> Compartir tecnología>>
Nueva tecnología de liberación controlada en una película delgada para dispositivos médicos, implantes y aplicaciones tópicas

topical, Controlled Release, coating, cosmetic, sunscreen, skin, orthopaedic, MEDICAL, Drug delivery
- Descripción de la oferta tecnológica :
  
  BioIntraface, Inc., recubrimientos (www.biointraface.com) se basa en una nueva tecnología híbrida usando materiales precursores de metal-orgánicos para crear tanto el óxido de metal y revestimientos de polímero a partir de soluciones líquidas. Cada componente de la capa ya se utiliza comunmente en otros dispositivos médicos. Los recubrimientos posibles se han optimizado con una innovadora y rápida detección de la plataforma de cultivo celular, inspirado en los métodos utilizados por las grandes empresas farmacéuticas para el descubrimiento de nuevos medicamentos. El resultado final son multi-funcionales recubrimientos de liberación controlada que se unen químicamente a sustratos, incluyendo propiedades de la piel y la oferta de liberación de larga duración. No liberadores de ingredientes activos también se pueden cargar en la tecnología, tales como filtros solares.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  At BIOINTRAFACE, INC., We have modified highly bio-compatible metal oxides with polymers to make them controlled delivery matrices. The can be rapidly created, modified and validated using drug discovery type techniques. These coatings are biocompatible, non-cyctotoxic according to ISO standards and can be formulated to have long-lasting antimicrobial or other controlled delivery properties.
  
  Our hybrid technology uses dilute liquid solutions to form coatings. This gives BI the ability to rapidly formulate optimal compositional variations and apply them using inexpensive, low technology methods, such as dip and spray coating or direct topical application. The dip coating process may be integrated with existing manufacturing process lines. This is a great cost saving benefit over other coating technologies which often require high temperatures, special atmospheres, vacuum or high energy inputs (e.g. chemical vapor deposition, ion beam, or plasma spray processes).
  
  The solutions react with atmospheric moisture to rapidly form thin, solid, and durable coatings at room temperature. Our precursors have reactive components to ensure even chemical bonding with the surface of medical implants. Our selections of solvents, mostly isopropyl alcohol, are in response to new FDA recommendations and preempt future regulatory requirements. These solvents are suitable for normal cleaning and rinsing steps used during device manufacture. Leer más
O-942Universidad Carlos III de Madrid / España 892

Solicitar información>> Compartir tecnología>>
Cable conector blindado para medir la impedancia de la superficie de transferencia.

Electrical Technology measurements, analysis, Methods testing, Avionics, aeronautical, Broadband
- Descripción de la oferta tecnológica :
  
  El grupo de investigación de Sistemas de Potencia Electrónica (GSEP) de la Universidad Carlos III de Madrid ha desarrollado un nuevo tipo de conector con conexión impedancia muy baja, lo cual es aplicable en las pruebas de medición de impedancia de superficie de transferencia de cables apantallados. Estas pruebas son especialmente necesarias cuando los requisitos técnicos son altos, tales como la industria aeronáutica.
  
  El conector tiene dos ventajas principales sobre los conectores convencionales, reduce significativamente el tiempo necesario para preparar la configuración de medición y es adaptable a una amplia gama de diámetros sin distorsionar el blindaje del cable blindado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Quality control of shields involves preparing samples where the cable end connections should not distort measurements. Preparing these samples requires a very significant manual effort and great skill. The developed solution improves the quality of connections and it reduces drastically the total required time.
  
  The developed connector gets the proper shielding to carry out tests on the test bench by Line Injection Method, according to the CENELEC EN 60512-23-3:2001 or IEC 62153-4-6. It presents two main advantages over conventional connectors:
  - It reduces significantly the time needed to prepare the measurement configuration
  - It can handle a wide range of diameters without distorting the shield of the cable Leer más

Proveedor de innovación destacado University of Seville

Sobre University of Seville

Portafolio de tecnologías

Política de open innovation

O-883University of Seville / España 652

Solicitar información>> Compartir tecnología>>
Nuevo método de localización con redes inalámbricas

localization, hardware, safety, security
- Descripción de la oferta tecnológica :
  
  Nuevo sistema de localización inalámbrico. El sistema se compone de una serie de nodos fijos y móviles, y mediante un proceso distribuido de estimaciones y otro centralizado, una única respuesta a la localización de cualquier elemento puede ser obtenida para determinar su ubicación.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The technique, based on wireless sensory networks seeks to avoid adding complexity to the device through hardware, which would increse its weight and cost. The main benfit of employing this method as compared to others is that there is no need for a previously calibrated environment, and it is a system that is less affected by acoustic interference. Unlike other proposed methods, this one doesn’t require any additional hardware beyond an RSSI meter, nowadays found in all commercial radio receivers. Leer más
O-857University of Alicante / España 1141

Solicitar información>> Compartir tecnología>>
Novel visual inspection system for quality control in production processes

inspection vision, visual automatic, agrofood industry, quality control
- Descripción de la oferta tecnológica :
  
  Un grupo de investigadores españoles ha estado trabajando en sistemas de inspección que utilizan una o más cámaras, junto con los adecuados sistemas de iluminación para capturar las imágenes necesarias. Estas imágenes se envían a un ordenador que procesa la información para realizar la clasificación de acuerdo con los criterios de calidad y las características solicitadas por el proceso de producción.
  
  El principal aspecto innovador de esta tecnología es el uso de técnicas avanzadas de procesamiento de imágenes para obtener sistemas de inspección de mayor calidad. También es posible el uso de imágenes de sonar o la adición de
  luz estructurada con el medio ambiente con el fin de analizar defectos en los productos y formas. Por lo tanto, los problemas de brillo y sombras de imágenes puede ser evitado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Visual inspection systems are based on the employment of pictures, both in the visible and infrared or ultraviolet spectrums. They can also make use of sonar images or adding structured light to the environment in order to analyze defects and shapes in products.
  
  The figure shows an image obtained by means of a range camera that allows distinguishing an object by its depth. Thus, its position and defects can be determined through its volume.
  
  The technology is totally developed and has been laboratory and field tested, although, it requires a particular specification for each case. The technology can be used for real-time inspection of production processes, both for the recognition and for the classification and quality inspection. Leer más
O-759University of Alicante / España 942

Solicitar información>> Compartir tecnología>>
Avanzados dispositivos de seguridad pasiva para vehículos

Automotive, materials, security, impact, bumper, absorption, car, truck
- Descripción de la oferta tecnológica :
  
  Esta tecnología desarrollada permite la producción de nuevos dispositivos de seguridad avanzada con una estructura interna y un diseño innovador (estructura fractal) que mejora la absorción de la energía mecánica generada en una colisión de un vehículo. Este sistema es complementario a los sistemas de seguridad estándar como el cinturón o bolsas de aire.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The passive safety systems are elements incorporated to the vehicles in order to minimize the consequences of an accident that implies the collision of the vehicle. The use of standard technologies in motor vehicles does not avoid completely the consequences of the accidents and thus a high number of them are mortals. Moreover, thousands of persons including children and elderly are gravely wounded or died each year in traffic accidents.
  
  This technology developed lets the production of new advanced safety devices with an internal structure and an innovator design (fractal structure) that improves the absorption of the mechanical energy generated in a collision of a vehicle. This system is complementary to the standard safety systems as the belt or airbags.
  
  The advanced materials used and the design of the internal structure of parts and components let to develop new systems with light weight and a high efficiency rate compared to the standard devices: metallic tubes, standard bumpers, program of structural deformation, etc.
  
  Redesigning the internal structure of standard components or by means of the development of new devices specifically designed for this use, this technology could be incorporated in any type of vehicle.
  
  The technology could be incorporated to the standard industrial production methods and does not affect to the standard safety systems of the vehicles.
  
  Parts, components and specific devices with the same external shape than the standard ones but with a higher performance could be developed. In cars and other vehicles, the chassis, bumpers, the engine supports and the perimeter of the passengers’ box could incorporate this technology.
  
  The tests with prototypes based on the technology reach a high capacity of absorption energy up to 1 MJ/m3 with a gradual absorption.
  
  The most important innovative aspects are:
  
  • The technology can be incorporated to any vehicle or component: heavy and light vehicles, industrial vehicles, cars, trucks, body car, bumpers, passenger box, etc.
  • Innovator design with a high performance in absorption of mechanical energy.
  • Advanced materials let a high performance and low weight: composites with an advanced nicro/nano structure, fiber/metal materials combination.
  • New devices with high capacity of mechanical energy absorption could be developed. The energy is absorbed in a gradual manner.
  • The absorption of standard components could be improved by means of the redesigning their internal structure with this technology.
  • Quick design of parts and components with high performance and lightweight.
  • Easy implementation on a large scale production.
  • The standard safety systems of the vehicle are not affected by the use of this technology. Leer más
O-343Nanophotonics Technology Center - Universidad Politecnica de Valencia / España 1656

Solicitar información>> Compartir tecnología>>
Nanophotonic biosensors devices

biophotonic, Biotechnology, optical, biosensors, microfluidics, photonics
- Descripción de la oferta tecnológica :
  
  The Valencia Nanophotonics Technology Center (NTC) is a research center inside the Universidad Politécnica de Valencia (UPV). The center includes its own team of 45 researchers.
  
  Our mission is to establish leadership in Europe in the micro/nanofabrication of silicon structures for the development of nanotechnologies. Our photonics products are applied in sectors such as: optical fibre networks and systems, biophotonics, defence, security, and photonic computation.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The biophotonics line designs, manufactures and experimental tests integrated photonic structures. These kinds of sensors enable the detection of clinical analytics, environmental contaminants, DNA, explosives or biological weapons.
  Research also includes other scientific disciplines such as microfluidics and biochemistry.
  
  Market applications
  
  The use of integrated planar photonic devices for biosensing purposes has been attracting an increasing interest in the last few years. Some of the main advantadges of these devices for sensing applications are their high sensitivity due to the high confinement of the electromagnetic field in the photonic structure which enhances the interaction with the target analyte, and their reduced size, which makes it possible both to detect very small analytes and to integrate many of these devices on a single chip to perform a multi-parameter detection. Particular interest is focused on integrated planar photonic devices fabricated on silicon-on-insulator (SOI), also given the important advantage of their compatibility with CMOS fabrication technologies, opening the door to a low cost and high volume production of these devices.
  
  Innovative aspects
  
  Using these structures we have developed devices for the detection of refractive index variations (sensitivity of 174.8 nm/RIU and detection limit of 3.5x10-6 RIU), label-free detection of antibodies (surface mass density detection limit below 2.1 pg/mm2, and a total mass detection limit of only 0.2 fg), and label-free detection of single strand DNA (detection limit below 20 nM).
  
  Main advantage of the technology
  
  - High sensitivity to small amounts of target analyte,
  - Able to detect any target analyte, regardless its size (even small amounts of single strand DNA can be detected).
  - Very reduced size, allowing the integration of hundreds of sensing structures on a single chip.
  - Capability to perform multi-parameter analysis on a single chip.
  - Low cost and high volume production when using CMOS compatible fabrication tecgniques.
  - It can be integrated with a control electronic layer. Leer más

Proveedor de innovación destacado University of Aveiro - UATEC

Sobre University of Aveiro - UATEC

Portafolio de tecnologías

Política de open innovation

O-894GAIKER, Technological Centre / España 125

Solicitar información>> Compartir tecnología>>
Development of fire resistant thermoset and thermoplastic materials. Reaction to fire test laboratory, accreditted certificate ENAC nº 72/LE187.

Fire resistant material, thermoset material, thermoplastics material, resins, Coatings, intumesce, nano
- Descripción de la oferta tecnológica :
  
  Fire resistant thermoset and thermoplastic materials development and formulation.
  
  Transformation of materials through different technologies and process, RTM, SMC, Compression Injection
  
  Characterization of the materials, mechanical properties, thermal properties, UV absorption properties…
  
  Reaction to fire test, regulation:
  - Construction sector: EN 13501-1
  - Transport sector: CEN TS 45545-UNe 23727-90-NF F16101-Directive 95/28/CE
  - Electric and electronic sector: EN ISO 4589-EN ISO 60695-2 – EN 50267
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  New development of thermoset and thermoplastic materials.
  
  - Nanotechnology in order to improve materials properties like fire behavior, impact resistance, mechanical properties…
  - Combination of properties like: light weight materials with high mechanical properties and fire resistant coating
  - Materials with low environmental impact and use of recycled materials
  Leer más
O-895GAIKER, Technological Centre / España 153

Solicitar información>> Compartir tecnología>>
Development of smart materials, design, formulation, transformation and characterization of magneto-rheological fluids, conductive polymers, memory shape polymers, piezoelectric materials and nano particles

smart material, smart textil, conductive polymer, shape change material, phase change material, Nanotech
- Descripción de la oferta tecnológica :
  
  Smart materials development, formulation, processing and testing of:
  
  - Magneto-rheological fluids: change their rheological characteristics under the influenceof a magnetic field. This change is reversible and instantaneous.
  - Compounds with different level of electrical properties: Piezo electric polymers, intrinsic and extrinsic conductive polymers.
  - Active material compound: thermoplastic and thermoset materials with active properties, antibacterial, photoactive, chromoactive…
  - Smart textiles: Development of filament with new properties like conductivity, memory shape, color change…
  - Smart structures development.
  - Integration of phase change materials.
  - Nanoparticles: synthesis processing, and characterization of nanomaterials, organic, inorganic and hybrid with different properties.
  
  Transformation of materials through different technologies and process:
  
  - Micro-encapsulation technology, supercritical fluid technology for extraction or impregnation, Injection,Compression,Infusion,RTM, SMC,
  
  Characterization of the materials, mechanical properties, IR, UV, rheological properties thermal properties, microscope TEM,SEM
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Development of thermoset and thermoplastic materials with new functions and improved properties
  
  - Nanotechnology in order to improve materials properties like fire resistance, impact resistance, mechanical properties…
  - Combination of properties: light weight materials with high mechanical properties and fire resistant coating
  - Materials with low environmental impact and use of recycled materials
  - Smart textiles
  - Active materials
  - Smart structures
  - Conductive polymers
  - Microencapsulation
  - Supercritical fluids
  Leer más
O-896GAIKER, Technological Centre / España 133

Solicitar información>> Compartir tecnología>>
Development of thermoplastics and thermoset materials, formulation, aditivation, nanoaditivation, compounding, transforming processes, characterization and testing (mechanical properties, chemical, fire resistant, impact resistant….)

Antifouling, natural fibers, coating, biocomposites, resins, antiscratch, lightweight materials, insulation
- Descripción de la oferta tecnológica :
  
  From the initial formulation of the raw material to finished product.
  
  Development of new formulation: to get new properties and functionalities
  - Nanoparticles
  - Natural fibers
  - Paints and Coatings
  - Lightweight materials
  
  Transforming processes for both thermoplastic and thermoset materials
  
  - Injection molding
  - Compression
  - SMC/BMC
  - Pultrusion
  - Filament wilding
  - RTM
  
  Characterization and testing according to the required standard
  - Mechanical laboratory
  - Coatings laboratory equipped with application facilities
  - Microscopy laboratory (EDAX,SEM,TEM…)
  - Rheology laboratory
  - Fire resistance laboratory
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Reduced weight but not mechanical properties
  - Improved mechanical properties
  - Bio-composites, thermoplastics or thermosets with natural fibers.
  - Improved anti-scratch properties
  - Antimicrobial materials
  - Conductive plastic
  - FMR (Fluids Magnetorheologic)
  - Shape memory polymers
  - Adding recycled materials
  - Improved thermal insulation properties
  - Improved acoustic insulation properties
  - Antifouling
  - Self-cleaning surfaces
  - Reduce curing cycle time, alternative systems (microwave…)
  Leer más

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en Aerospacio y defensa : Oportunid... | Ofertas

Innovación en Aerospacio y defensa : Oportunid... | Ofertas

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal

tool, tightening nuts, confined spaces, nut

Munition, ammunition, LOT, trace, triboluminescent, photoluminescent, luminescent

Hydrogen, Storage, Fuel Cell, Fuel, energy

3DTV, hollography, 3D images, metrology, 3D microscopy, Oftalmology, 3D laparoscopy, 3D surgery

Ballistics, protection system, cork

programming, consulting, thermal analysis, modeling and simulation, CFD, Computational Fluid Dynamics

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid

nuclear, smart textiles, Nuclear protection, nuclear protection fabric, nuclear power plants, nuclear power, nuclear medicine, oncology, medical devices, millitary

Multiscale modelling, computed aided engineering, materials design, materials genome, Nanomaterials

switching power converter, power converters, voltage-sensing circuit, power management, energy management, battery, batteries, portable devices, energy harvesters, consumer electronics

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy

The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.

Coatings, coating, stain treatments, plastics, hydrofobic, oleophobic, catechol, metals, plastics

Nuevo proceso para la obtención de recubrimientos capaz de proporcionar propiedades hidro-oleofóbicas a una amplia variedad de sustratos tales como textil, plástico, metal, etc, utilizando técnicas de inmersión lo que reduce los costes.

With the catecholic functionalization it is possible to add hydro-/oleophobic properties to the coating (functionalization can be also used in obtaining other properties such as biocides, etc.) and adhesion capability to a wide variety of substrates such as textile, plastic, metal, etc. Leer más

technology, innovation, integration, blow, extrusion, Plastic, molding

ultrasound thermoplastic injection technology, injection technology, plastic components, plastics, microinjection, plastc molding, molding, molding industry plastic, thermoplastics, micro-molding machines, micro moulding, mini moulding, thermoplastic microinjection machine, welding, cutting

antiscratch, Automotive, Construction, Antifouling, clear coating formulatio, nanoparticles, antibacterial

Nuevo e innovador revestimiento resistente a los arañazos con excelente: - Retención de brillo después de la abrasión - Aspecto estético - Principalmente brillo - transparencia - Funcionalidades adicionales podrían sumarse de acuerdo a sus especificaciones o requisitos

prepreg, thermoset, thermoset materials, thermoplastic, railway OEM, Construction, automotive OEM, shipyard, resins, resin, intumescent coatings, Coatings

topical, Controlled Release, coating, cosmetic, sunscreen, skin, orthopaedic, MEDICAL, Drug delivery

Electrical Technology measurements, analysis, Methods testing, Avionics, aeronautical, Broadband

localization, hardware, safety, security

Nuevo sistema de localización inalámbrico. El sistema se compone de una serie de nodos fijos y móviles, y mediante un proceso distribuido de estimaciones y otro centralizado, una única respuesta a la localización de cualquier elemento puede ser obtenida para determinar su ubicación.

inspection vision, visual automatic, agrofood industry, quality control

Automotive, materials, security, impact, bumper, absorption, car, truck

biophotonic, Biotechnology, optical, biosensors, microfluidics, photonics

Fire resistant material, thermoset material, thermoplastics material, resins, Coatings, intumesce, nano

smart material, smart textil, conductive polymer, shape change material, phase change material, Nanotech

Antifouling, natural fibers, coating, biocomposites, resins, antiscratch, lightweight materials, insulation

Usuario nuevo (registro gratuito)

Usuario registrado

Nuevo e innovador revestimiento resistente a los arañazos con excelente:
- Retención de brillo después de la abrasión
- Aspecto estético
- Principalmente brillo
- transparencia
- Funcionalidades adicionales podrían sumarse de acuerdo a sus especificaciones o requisitos