Innovación en catalytic technologies : Oportun...

1 2 3 4 5

O-477AMIC, Environmental and Industrial Applications of Catalysis / España 2789

Solicitar información>> Compartir tecnología>>
Tratamiento catalítico de aguas residuales para la eliminación de materia orgánica

Organic matter remowal, wastewater treatment, catalytic technologies, innovative, Oxidation process
- Descripción de la oferta tecnológica :
  
  HIDROMAT (Catalytic Wet Air Oxidation Process) es una tecnología basada en la eliminación de compuestos orgánicos recalcitrantes mediante una reacción catalítica, donde los contaminantes son transformados en productos inocuos o reutilizables, lo que resulta en productos con mayor valor añadido.
  
  La reacción tiene lugar en un reactor catalítico en fase de vapor, donde los contaminantes orgánicos se transforman en dióxido de carbono y agua destilada después de una reacción exotérmica: CnHm + O2 -> CO2 + H2O + Q
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The catalytic technology allows you to remove high concentrations of COD (40.000-200.000ppm) at atmospheric pressure.
  
  All kind of organic compunds are removed (biodegradable and non biodegradable ones).
  
  The catalyst life is around 2-3 years. It is an exothermic process, so the energy needed for the process is just for the start up. The process works at 250-350ºC. Leer más
O-1029AMIC, Environmental and Industrial Applications of Catalysis / España 774

Solicitar información>> Compartir tecnología>>
Hidrohal, deshalogenación (hidrodeclorinación catalítica selectiva)

dehalogenation, catalytic hidrodechlorination, decontamination of effluents, clean technology, catalytic technology, chemicals, petrochemicals, fine chemicals, chemical engineer
- Descripción de la oferta tecnológica :
  
  Innovadora tecnología apropiada para la descontaminación de efluentes con compuestos halógenos orgánicos.
  La reacción catalítica, hidrodecloración selectiva, consiste en la reacción de compuestos orgánicos halogenados con hidrógeno en un reactor catalítico. Es una tecnología limpia que utiliza hidrógeno como reactivo y no se generan residuos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The catalytic technology allows you to break up the organic compound from the halogen, obtaining the hidrur HX, which has a lower toxicity than the halogenated organic compound.
  The chemical formula of the catalyst designed by the researchers of the Rovira i Virgili University, is the key of the process. Leer más
O-1030AMIC, Environmental and Industrial Applications of Catalysis / España 1746

Solicitar información>> Compartir tecnología>>
Hidracot, eliminación de materia orgánica (oxidación avanzada catalítica, DQO <5,000 ppm)

catalytic advanced oxidation, catalytic oxidation, organic matter removal, Water, catalytic reactions, effluents, industrial effluent treatment, wastewater, sewage
- Descripción de la oferta tecnológica :
  
  La fórmula química del catalizador diseñado por los investigadores de la Universidad Rovira i Virgili, es la clave del proceso.
  
  La reacción se lleva a cabo en fase líquida en un reactor catalítico, donde el agua contaminada y el peróxido de hidrógeno reaccionan con el ozono, obteniendo agua potable y CO2 como productos.
  El peróxido de hidrógeno se genera in situ en el reactor catalítico por reacción directa entre el oxígeno y el hidrógeno evitando los riesgos de manipulación del operador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Catalytic Advanced Oxidation technology removes the organic matter at atmospheric pressure and mild reaction temperatures (< 60 ºC) getting clean and reusable water.
  
  It is a simple process that uses very mild operating conditions and does not require complex systems.
  
  It is a clean technology, and does not generate waste or by-products, with low power consumption and small space requirements compared to biological treatments.
  
  The organic pollutants are oxidized to CO2 gas obtaining conversion values around 99%. Leer más
O-499Environmental and Industrial Applications of Catalysis / España 1605

Solicitar información>> Compartir tecnología>>
Extracción de nitratos y nitritos del agua mediante una tecnología de hidrogenación catalítica selectiva

nitrates, Water, drinking water, catalysis, nitrites, potable water, catalytic hydrogenation
- Descripción de la oferta tecnológica :
  
  Tecnología innovadora desarrollada en la Universidad de Tarragona capaz de eliminar los nitratos y nitritos del agua, para conseguir agua potable (valores deseados de nitratos <50 ppm). La eliminación de nitratos se consigue mediante una reacción catalítica que convierte los nitratos y nitritos en nitrógeno gaseoso en un solo paso utilizando el hidrógeno gas como reactivo. La reacción se produce en un reactor catalítico proporcionado por APLICAT que funciona en un modo continuo. Los productos son nitrógeno gas y agua potable
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The chemical formula of the catalyst designed by the researchers of the Rovira i Virgili University, is the key of the process, therefore is protected and commercialized by APLICAT. Winner of the enviromental award of the Catalan Government at 2006
  
  Two semi industrilal plants are constructed and working in two towns of Tarragona, obtaining concentrations of nitrates lower than 20ppm.
  Leer más
O-1175Syncoda Technologies / Estados Unidos 345

Solicitar información>> Compartir tecnología>>
Una cartera de más de 200 patentes / solicitudes de todo el mundo que cubren la tarjeta SIM basado en tecnologías 2.4 GHz inalámbricos móviles de pago que permiten monedero addon capacidad de los teléfonos celulares convencionales

wireless, mobile payment, payment technologies, online payment, payment, smart phones, cell phones, SIM card, mobile credit cards, Mobile banking, mobile ticketing
- Descripción de la oferta tecnológica :
  
  Pioneer de alta frecuencia (por ejemplo, 2,4 GHz) Tecnología pago móvil. Más rápido, más seguro que otras tecnologías (por ejemplo, NFC). SIM-Card base. Completa cartera de patentes de licencia / venta. Completar la transferencia de tecnologia. Cooperación conjunta para producción. Bajo coste: unos pocos dólares para reemplazar la tarjeta SIM. Paquete completo que incluye más de 200 patentes en todo el mundo / Aplicaciones dirigidas a esta tecnología.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  -Plug-and-play technologies (e.g., SIM-Card-Based Mobile Payment Add-On Capabilities)
  -Instead of getting a new phone with mobile payment capability, users can simply replace a SIM card, or plug in an add-on card, to add such capability to existing mobile phones
  -Fast Deployment on the user side: only need to replace the SIM card or add a sticker to the SIM card;
  -Fast Deployment on the POS side: no need to change the billing system; does not affect other applications
  -Achieving Range Control with Magnetic Field
  -Fast Data Flow with RF (e.g., 2.4 GHz)
  -Extra Layer of Security
  Leer más
O-672University of Alicante / España 1298

Solicitar información>> Compartir tecnología>>
Trampa catalítica "No-Noble-metal" para eliminar hidrocarburos, emisiones de NOx y CO de motores de combustión

Chemistry, Catalyst, catalysis, combustion, NOX, HC, CO, exhaust, gas, stream, zeolite, trap.
- Descripción de la oferta tecnológica :
  
  El grupo de investigación ha desarrollado una trampa catalítico basada en un material adsorbente para disminuir las emisiones de HC en los gases de escape de motores de combustión interna, y especialmente, para minimizar las emisiones de estos compuestos durante el arranque del motor en frío. Este sistema está libre de metales nobles e incluye una o varias capas de un tamiz molecular que contiene uno o varios metales de transición (Cu, Fe, Zn, Co o Ni).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Basically, the catalytic trap bed is composed of a zeolite with a Si/Al ratio between 10 and 20. The zeolite is partially interchanged with cations of one or several non-noble metals. In order to achieve an optimum performance of the catalytic trap, these metals should be interchanged in the internal zeolite structure, and never on its external surface. In this way, the outflow of the exhaust gases passes through the catalytic trap bed to adsorb the HC at low temperatures.
  
  The material has been developed at laboratory scale. Different compositions of this material have been tested with simulated streams of internal combustion engines (cold starts). As a result, the material is able to reduce HC emissions in internal combustion engines operating with both mixtures almost stoichiometric and low fuel mixtures.
  
  The main difference between this invention and other existing materials is that this catalytic trap avoids any element or additional layer composed of an oxidation catalyst based on noble metals. Consequently, HC emissions could be totally removed through a single bed without using high-cost materials (noble metals) or further stream treatments. This fact allows the catalytic trap to be placed in any position according to the different control systems employed for decreasing other pollutant emissions existing in the gases stream, since the total elimination of HC takes place on the catalytic trap.
  
  Thus, this technology development results in a solid material where coexists metal(s) and protons in an optimum ratio inside of the zeolite channels, leading to a system that can act as a HC trap and as an oxidation catalyst in only a single bed, during the whole cold start cycle.
  
  The main innovative aspect of this catalytic trap is that the adsorbent material can capture the hydrocarbons in the cold start of the engine and oxidize gases during its warmed-up operating conditions without using noble metals, which are frequently used as oxidation catalyst.
  At high temperatures, this material is able to carry out total oxidation of both hydrocarbons retained by the catalytic trap and those present in the exhaust gas stream. Consequently, the resulting gas stream released to the atmosphere is innocuous in hydrocarbons.
  
  • Noble metals are not used.
  
  • Structural advantages, since the control systems are simplified and pollutants in internal combustion engines are reduced.
  
  • Economic benefits (The price of noble metal is approximately 100 times more expensive than the materials employed by the researchers).
  
  • The catalytic trap can be placed in any position with regard to different control systems.
  
  • Besides its hydrocarbon trapping role, the system can also act as oxidation catalyst during the cold-start cycle. Leer más
O-898Altus Formulation Inc / Canadá 2024

Solicitar información>> Compartir tecnología>>
Nueva tecnología para la formación de fármacos de liberación controlada, mejorando la seguridad del paciente

Drug delivery, drug formulation, Abuse resistant, tamper resistant, pharmaceutical, pain
- Descripción de la oferta tecnológica :
  
  Enfocados en la seguridad del paciente y en evitar errores en la medicación de liberación controlada, la tecnología Intellitab han desarrollado, por primera vez, unos comprimidos ranurados de liberación controlada que cuando se rompen detienen el pleno rendimiento farmacocinético de los comprimidos.
  
  A diferencia de otras tecnologías de liberación controlada donde el romper el comprimido causaría la descarga de toda la dosis y por lo tanto una potencial sobredosis para el paciente, los comprimidos Intellitab permiten administrar la dosis de forma escalada y simple, además de la titulación de los comprimidos para así poder etiquetarlos basándose en la actividad puramente farmacocinética. Además, los pacientes no deben machacar ni masticar los comprimidos así se facilita la administración de formulaciones de liberación controlada Intellitab y se evita la exposición potencialmente incontrolada del medicamento.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Intellitab(TM) - Scored Crush, Tamper and Abuse Resistant Formulations that Prevent Dose Dumping
  
  Intellitab technologies allow, for the first time, stable scored controlled release tablets which may be broken without a change in performance – tablet pieces remain bioequivalent to the intact tablet. The hard Intellitab tablet resists breakage through chewing but if crushed and swallowed maintains controlled release with no change in peak levels of drug in the body. Further Intellitab technology robustly resists drug extraction in a range of solvents and liquids ,whether hot or cold, and prevents injection and euphoria through inhalation or insufflation.Immediate release tablets that prevent injection and the aims of insufflation are also available.
  
  By mitagating medication error, deliberate or inadvertant, Intellitab makes medications safer to use for the legitimate patient and protects those attempting non-medical use.
  
  Products approved on the Intellitab platform have obtained new class labeling from FDA based on their PK performance post breaking. Manufacturing utilises conventional equipment and processes to minimize cost of goods allowing the most appropriate price point for your drug.
  
  Leer más
O-893GAIKER, Technological Centre / España 168

Solicitar información>> Compartir tecnología>>
Active packaging, encapsulation of active components. Microencapsulation through different technologies, supercritical fluids and spray-drying. Improve of the barrier properties.

active packagingcoatings, antimicrobial, Microencapsulation, supercritical fluids, spry-drying, odour
- Descripción de la oferta tecnológica :
  
  Microencapsulation of active components:
  - Natural antioxidal (polyphenols,axtansatinas)
  - Oxygen absorbers
  - Flavor
  - Antimicrobial (organic and inorganic)
  
  Addition of these components in the materials: extrusion or compounding (PA, PE, EVA, PCL and PLA)
  
  Use of theses materials for active packaging to increase the shelf life of foods, to improve the packaging and protect from microbial organism spoilage
  Improve of the barrier properties.
  
  Using two different technologies supercritical fluids and spry- drying.
  
  Functionalization of nanoparticles with active properties.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Development of materials with new functions and improved properties for packaging.
  - Improve the barrier properties.
  - Increase the self life of foods
  - Improve the packaging quality
  - Protect the food against microbial organism
  - Odor removal
  - Controller released of odor
  - Controller released of different actives (vitamin C…)
  
  Leer más
O-63Enantia / España 2047

Solicitar información>> Compartir tecnología>>
Tecnologías de co-cristalización y estudios en forma sólida para la investigación y desarrollo de ingredientes farmacéuticos activos.

Solubility, bioavailability, Cocrystals, Solid form screening, Solid form characterisation
- Descripción de la oferta tecnológica :
  
  La compañía ha desarrollado un importante know-how en cuanto a la adecuada identificación contra-iones / cofomers basados en la estructura molecular del compuesto diana. El criterio de selección permite a Enantia maximizar la eficacia en la detección, siendo capaz de ofrecer resultados positivos en un tiempo relativamente corto (en contraste con los métodos de alta a través de grandes conjuntos de datos que generan resultados menos estudiados con precisión y procesos mucho más largos).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  CO-CRYSTALLlZATION TECHNOLOGIES
  
  The application of co-crystallization technologies has only recently been recognised as a way to improve physico-chemical properties of APIs and their synthetic intermediates. Better profiles may include enhanced solubility, better stability and the extension or widening of IP position with respect to the development of active pharmaceutical ingredients (APIs).
  
  Enantia has developed a strong know-how in terms of identifying suitable counter-ions/ cofomers based on the molecular structure of target compound. The oriented screening approach enables Enantia to maximize effectiveness in screening, being able to deliver positive results in relatively short time (in contrast with high throughout put methods where large sets of data are generated resulting in less accurately studied results and time consuming processes.)
  
  The solid forms department has as well experience in polymorphism screening and polymorphism study. By the use of co-crystal technology new polymorphs might be found even for the cases in which by classical techniques the number of polymorphs has been extensively studied.
  
  Enantia as well successfully applies co-crystallization technologies in key areas of process chemistry: i.e. purifications and resolutions. Co-crystals have been demonstrated to be complementary to salts for purification purposes, so products can be isolated using co-crystallization processes in order to obtain the desired specifications.
  
  For enantiomeric resolutions, co-crystals can be an excellent alternative to salts (in cases when the molecule is not ionisable or the resolution is not effective). With chiral co-formers enantiomeric resolutions have been achieved to maximum standards of enantiomeric purity.
  
  SOLID FORM STUDIES
  
  Enantia solid forms department offers services for the analysis and characterisation of solid forms.
  In house X-Ray Diffractometer: to obtain crystallographic data from solid samples.
  Single crystal Diffraction: to determine the crystalline structure of a single crystal sample.
  Synchrotron beam light: to determine crystalline structure from either single crystal to powder samples. High sensibility to determine very small quantities of different crystal forms in a sample.
  Leer más
O-892Ventura Medical Technologies, S.L. / España 868

Solicitar información>> Compartir tecnología>>
Nuevo kit quirúrgico para Pectus excavatum

Pectus Excavatum, Pectus Plate, Pectus UP, medical devices, Design & Production Engineering
- Descripción de la oferta tecnológica :
  
  Ventura Medical Technologies junto con el Dr. Carles Bardají, de la Corporació Sanitària Parc Taulí, han desarrollado un nuevo método quirúrgico (Taulinoplastia) y un nuevo producto (Pectus Cirugía Up Kit) para la corrección de Pectus excavatum reduciendo sustancialmente el riesgo de la cirugía y el tiempo de recuperación postoperatoria al minimizar las complicaciones de las personas afectadas por esta dolencia.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The pectus excavatum is a congenital deformity of the chest that is characterized by chest takes a concave shape as the "funnel". The sternum inward investment is generating pressure on vital organs of the chest, restricting the growth potential of these causing shortness of breath and difficulty breathing. This malformation occurs in 1 of every 1000 children and is the most common congenital anomaly of the chest wall (90%). The ailment manifests slightly worse at birth and during childhood and adolescence.
  
  From the collaboration between Ventura Medical Technologies and Dr. Bardají born a new method, Taulinoplastia, and a new surgery kit, Pectus UP, to correct the Pectus Excavatum presenting suitable advantages in front of the methods used currently. Pectus UP is a set of tools and implants fabricated with the aim to treat Pectus Excavatum by Taulinoplastia being less painful and less post-operative time than other methods. Leer más
O-280University of Alicante / España 1228

Solicitar información>> Compartir tecnología>>
Know-how in home automation and smart environments

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis
- Descripción de la oferta tecnológica :
  
  Digital services for housing, efficient use of energy, life-assisted for living environment, buildings, technologies for the elderly or disabled people. The research group "Automation and Intelligent Environments (DAI)" has a wide-ranged knowledge in the development and implementation of technologies for home automatation systems.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The research group "Automation and Intelligent Environments (DAI)" has a wide-ranged knowledge in the development and implementation of technologies for home automatation systems. In that sense the Group has been working in the development of technologies that integrate the management of the entire set of electronic devices existing in a home.
  
  The group is specialized in providing home automation solutions to people with mobility problems, such as elderly people, children or disabled people. It also is experienced in the development of computer systems for energy management of housing.
  
  Market applications
  
  Digital services for housing, efficient use of energy, life-assisted for living environment, buildings, technologies for the elderly or disabled people.
  
  Innovative aspects
  
  The research group has significant experience in developing automated systems for all types of environments. The possibility to develop specific integration solutions for any type of device used in a home (lighting, security system, wireless appliances and entertainment equipment, sensor network environment, etc.).
  
  They can also integrate all kinds of control systems and power generation to facilitate saving and energy efficiency of buildings.
  
  The group is able to develop new solutions based on the requirements and user needs.
  
  Main advantages of the technology
  
  The technology developed by the research group is established in the project metalTIC - Digital Home. This project, conducted for the Federation of Employers of the Metal of the Province of Alicante (FEMPA), has been the design and development of a set that simulates a house with the latest innovations in TICC to provide services at home.
  
  The 50 square meters house has a living room with kitchen, bedroom and bathroom, showing key concepts such as energy control, monitoring and security, comfort and leisure, communications, accessibility and management. Leer más
O-929Institute of Chemical Research of Catalonia (ICIQ) / España 832

Solicitar información>> Compartir tecnología>>
Innovadoras tecnologías de aminación: en busca de sustratos de interés industrial

amination technologies, amine, amines, amination, fine chemicals, APIs, agrochemicals, alkenes, olefins, acetylenes, allylic ethers, dienes, pharmaceutical drugs, synthetic chemist, Chemistry
- Descripción de la oferta tecnológica :
  
  Hemos desarrollado nuevas metodologías para la producción de aminas a partir de una amplia variedad de sustratos que contienen grupos funcionales. Más precisamente, las metodologías desarrolladas permiten llevar a cabo en una manera eficiente intermolecular 1,2-diamination de alquenos, entre otras aplicaciones. Estamos buscando socios / licenciatarios para desarrollar aplicaciones de la tecnología en los sustratos de relevancia comercial.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The developed methodologies represent first in class processes for direct introduction of nitrogenated groups onto olefins, acetylenes, allylic ethers, dienes etc. The 1,2 diamine scaffold is found in a large number of natural products with interesting biological activity and in many important pharmaceutical drugs. Their chiral derivatives are also used by the chemical community as control elements in asymmetric synthesis and catalysis. These derivatives therefore represent an attractive target for the synthetic chemist. However, such compounds have proven really challenging to prepare in one sole synthetic step.
  
  Two main methodologies are available:
  1) Metal catalyzed intermolecular 1,2-diamination of internal olefins and allylic ethers: allows for introducing two different nitrogenated groups on the scaffold of the substrate for further selective functionalization or derivatization in a stepwise manner and in mild conditions.
  
  2) Metal free amination reactions: High yielding and versatile: stereoselective 1,2-diamination of terminal alkenes, 1,2-diamination of internal alkenes, diamination of dienes and trienes, allylic amination, amination of acetylenes are some examples of applications of this methodology, based on the use of hypervalent iodine (III) derivatives. Leer más
O-856Other Side Mirror S.L. / España 923

Solicitar información>> Compartir tecnología>>
Nuevo concepto de laboratorio para analizar los movimientos del cuerpo humano usando una combinación de tecnologías en función de las partes del cuerpo a analizar

human, body, analysis, Diagnostic, personal, injury, valuation, treatment, rehabilitation, EMG,
- Descripción de la oferta tecnológica :
  
  Nuevo concepto de laboratorio para el análisis de los movimientos del cuerpo humano y la valoración de daños personales utilizando una combinación de "3D infrared Motion Capture", superficie EMG y medición fuerzas. El laboratorio funciona con las diferentes tecnologías sincronizadas y crea automáticamente el informe final listo para ser analizado por el evaluador para escribir las conclusiones o el diagnóstico.
  
  Podemos combinar "3D infrared Motion Capture", "surface EMG", plantillas instrumentadas, dispositivos inerciales y balanzas
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Integrated and synchronised laboratories, easy to be operated by only one person with reports already defined. Only is needed to fill in the diagnosis or conclusions. It is also prossible to adjust the laboratory specifications to the needs of each user, adapting the reports too. The technologies used are specific to the user needs: hospitals, rehabilitation clinics, sports, insurance companies, national health systems, ergonomy studies, etc. Leer más
O-964Knowledge Innovation Market / España 662

Solicitar información>> Compartir tecnología>>
Las nuevas tecnologías de señalización para la seguridad del tráfico

signaling technologies, Signaling technology, traffic safety, traffic control, traffic lights, traffic, brackets, poles, LED
- Descripción de la oferta tecnológica :
  
  Chasis del semáforo, incluyendo soportes y bastones. (las diferentes piezas pueden ser comercializadas por separado). Conjunto modular de fácil acoplamiento con sistema anti-rotación, permitiendo así la creación de diferentes combinaciones disponibles. Producto de calidad a un precio muy competitivo, a raíz de la evolución del mercado y que incluyen sistemas muy innovadores para su durabilidad y mantenimiento.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Easy lamp removal system with its new diffuser system.
  - Quick pressure clamping of hood with 9 and 4 anchor points allowing its rotation at intervals of 30 º.
  - High degree of electrical insulation thanks to its own dielectric characteristics.
  - New designs more ecofriendly and ensuring its durability against environmental and weather conditions. Leer más
O-948Universidad Carlos III de Madrid / España 551

Solicitar información>> Compartir tecnología>>
Objetivo el aprendizaje inclusivo. Utilizando las nuevas tecnologías dentro y fuera del aula

Education and training, e-Learning, voice recognition, communication, information
- Descripción de la oferta tecnológica :
  
  APEINTA propone el uso de las iniciativas de integración en el área de educación, dentro y fuera de las aulas, evitando las barreras de comunicación y de la información que podemos encontrar hoy en día, incluso en la educación. El uso de APEINTA presenta numerosos beneficios para todos los estudiantes, pero sobre todo permite el acceso a la educación a los estudiantes que tenían dificultades insuperables en el aula.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  APEINTA proposes the use of inclusive initiatives in the education area, in and out of the classroom, avoiding communication and information barriers that we can find even nowadays in the education. The use of APEINTA presents numerous benefits for all the students, but above all it allows the access to the education to those students who had insurmountable difficulties in the classroom. Leer más
O-999Centro Tecnológico BIO-GLS (Universidad Autónoma de Barcelona) / España 1306

Solicitar información>> Compartir tecnología>>
Nuevo y preciso método de determinación de la biodegradabilidad aeróbica y anaeróbica de los residuos orgánicos sólidos utilizando BMP respirometría precisa y dinámica

waste, respirometry, Biogas, compost, digestate, stability, biodegradability,
- Descripción de la oferta tecnológica :
  
  Tenemos la posibilidad de realizar análisis de biodegradabilidad de los desechos sólidos orgánicos de diversos orígenes: residuos industriales y municipales. Podemos utilizar estas tecnologías para determinar el índice de respiración dinámica (biodegradabilidad aeróbica) o BMP para mejorar, evaluar o diseñar procesos de digestión anaerobia.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Both technologies are the most reliable and useful methodologies to measure the biodegradability and stability of all range of organic wastes. The dynamic aerobic respirometry differs from the typical tests, based on the self-heating of the sample, since it can monitor the whole biodegradation process and give as result the total oxygen consumption derived from the biodegradation of the sample, related with the biodegradable organic matter content and the consumption rate of oxygen, related with the biodegradability and stability. The biogas test are a simple and useful technique to determine the real potential production of biogas (or methane) when treating organic wastes through anaerobic digestion processes avoiding gross estimations from data bases Leer más
O-474University of Alicante / España 970

Solicitar información>> Compartir tecnología>>
Nuevo catalizador que elimina de forma eficiente compuestos orgánicos volátiles clorados en corrientes gaseosas.

Organic compounds, environment research, gas streams, catalysts, dichloroethane, PVC, plastics
- Descripción de la oferta tecnológica :
  
  El grupo de investigación Materiales Carbonosos y Medioambiente de la Universidad de Alicante ha desarrollado un novedoso catalizador que permite eliminar de forma eficiente compuestos orgánicos volátiles clorados (especialmente el 1,2-dicloroetano, tóxico y ampliamente utilizado en distintos procesos industriales) en corrientes gaseosas a temperaturas de trabajo comprendidas entre 250-500 ºC. Estos nuevos catalizadores (óxidos mixtos de cerio-praseodimio) se caracterizan porque tienen un bajo coste de fabricación y son muy activos y estables en el tiempo, ya que no sufren una desactivación catalítica significativa (a diferencia de los catalizadores utilizados en la actualidad). Se trata por tanto de una novedosa tecnología con posibilidades de comercialización a nivel internacional. El grupo de investigación busca empresas interesadas en adquirir esta tecnología para su explotación comercial.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The new mixed oxide catalyst of cerium-praseodymium (CexPr1-XO2) allow the efficient combustion of chlorinated volatile organic compounds (especially 1,2-dichloroethane).
  
  These new catalytic systems are able to work in gas streams at temperatures between 250-500 º C in an dynamic and continuous way without suffering a significant deactivation process.
  
  In recent years, environmental legislation has restricted the air emissions permissible levels, and particularly the emission of volatile organic compounds (VOCs) harmful for both the environment and human health
  
  There is a wide variety of VOCs, of different chemical nature (aliphatic, aromatic, oxygenated and halogenated compounds) and consequence of different emission sources (waste gases from chemical plants, soil and water decontamination, solvents evaporation , etc..), but 1,2-dichloroethane (DCE, C2H4Cl2) is the most lasting, dangerous and commonly used in industry (used, for example, massively in the process of polyvinyl chloride production and consequently chemical plants produce significant amounts of waste that require efficient treatment).
  
  Until a few years ago, VOCs were usually eliminated by thermal incineration. However, new legislation on VOC emissions has originated significant improvements on treatment technologies. This is the case of the catalytic oxidation that in recent years has shown its ability to destroy VOCs at temperatures below those used in thermal incineration and has also produced a significant reduction of secondary pollutants (nitrogen oxides).
  
  Currently, catalytic oxidation processes require heating large gas flows that contain a small amount of VOCs and put the gas in contact with solid catalysts that can either be
  • Those containing noble metals as active phase: they have a excellent oxidation efficiency, although their cost is very high and gradually lose their activity with the presence of chlorine in the reaction mixture.
  
  • Those containing transition metals: they have a lower cost and are more stable and durable, although less active than those containing noble metals. Leer más
O-931empresa anónima / España 840

Solicitar información>> Compartir tecnología>>
Nuevo método de obtención de alcaloides derivados de cinchona útiles como catalizadores: en busca de licencia

cinchona, alkaloid, cinchona alkaloid derivatives, Catalyst, catalysts, quinine, quinidine, chiral building blocks, active ingredients, metal free catalysis, cascade reactions, catalytic, building block, chemical libraries, chiral synthesis
- Descripción de la oferta tecnológica :
  
  Un buen conocido instituto de investigación español busca distribuidores, fabricantes y / o licenciatarios de un nuevo proceso de obtención de una familia de derivados de alcaloides de cinchona que llevan un grupo amino primario. La síntesis divergente desarrollada permite preparar hasta un máximo de ocho compuestos diferentes de quinina y quinidina fácilmente disponibles. Estos compuestos son catalizadores útiles en la catálisis enamina / imina que se realiza en enolizables materias primas y son altamente selectivos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Chiral building blocks are currently used in the manufacture of active ingredients for the pharmaceutical and agrochemical industry. A powerful approach to achieve molecular complexity from small building blocks relies on the use of cascade processes catalyzed by amine containing scaffolds such as proline and cinchona alkaloid derivatives. The catalytic activity and potential of chiral induction of an amine catalyst can be finely tuned by small structural modifications.
  
  The developed divergent synthesis advantageously starts from quinine or quinidine and allows for the preparation of up to eight different compounds bearing a free amino group with small structural modifications. Access to both pseudo-enantiomeric pairs of currently available compounds is granted thanks to this route. The structural differences in the compounds allows for tackling subtle polarity effects and for a fast catalyst screening. Leer más
O-1003Ascamm / España 671

Solicitar información>> Compartir tecnología>>
EBIT, nueva tecnología para la fabricación de piezas de plástico huecas.

technology, innovation, integration, blow, extrusion, Plastic, molding
- Descripción de la oferta tecnológica :
  
  EBITTM (tecnología de moldeo de inyección por extrusión y soplado) es una tecnología completamente desarrollado en España que, en un solo paso (proceso y herramientas), se unen el moldeo por extrusión y soplado, el moldeo por inyección de tecnologias termoplásticas y técnicas avanzadas de control mediante el uso de sistemas embebidos y mecatrónica . Esta avanzada tecnología de fabricación permite la producción geométrica de complejas tridimensionales partes huecas de plástico con estructuras adjuntas y conectores integrados.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  While conventional processes require, at least, three independent processes for the production of a piece - (1) the main body (usually large) by extrusion blow molding, (2) additional or auxiliary components by other processes such as injection molding and, finally, (3) the welded joint or manual clipping between the main body and the part/s obtained by injection - EBIT combines all these technologies into a single integrated transformation process, obtaining highly competitive parts with high added-value and quality. Leer más
O-1111CITCEA-UPC / España 970

Solicitar información>> Compartir tecnología>>
Nuevos parques eólicos basados en la operación de frecuencia variable con un solo convertidor de potencia

green technologies, environment, energy, Repowering, offshore, power converter, induction generators, turbines, power plant, wind, wind power, Wind farm
- Descripción de la oferta tecnológica :
  
  Se propone este novedoso diseño de planta eólica con el correspondiente procedimiento de control para plantas de energía eólica basado en un único convertidor de potencia que facilita la operación de frecuencia variable en una planta de energía o grupo de plantas basado en generadores de inducción. El concepto permite aumentar la fiabilidad del sistema, reduciendo el coste general de la instalación. Se buscan socios para desarrollar aún más el sistema y / o establecer acuerdos comerciales, junto con la cooperación técnica.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The proposed configuration can be used for a cluster or for an entire power plant. Also, the proposed structure is suitable to adapt installed fixed speed wind turbines, adding a back-to-back power converter to inject the power to the grid. Furthermore, other generation technologies, such as tidal, wave or hydro based on induction generators can adopt the proposed concept. The key advantages of the concept include:
  
  Reduced number of power converters
  Cost reduction
  Reliability, availability and maintainability improvement
  Robust system with and without communications
  Grid code compliance including fault ride-through
  Possibility of removing the wind turbine transformer
  Leer más
O-1071ALMIDA Ltd. / Bulgaria 2415

Solicitar información>> Compartir tecnología>>
Tratamiento físico del agua y de sistemas basados en agua (fluidos) con aplicaciones muy amplias. Podrían aplicarse individualmente, para el tratamiento previo del agua o para otras tecnologías físicos o químicos para mejorar su desempeño.

Water, water treatment, effluent water, waste water treatment, WWT, irrigation, biofilm, aquaculture, RAS, sugar, food & drinks processing
- Descripción de la oferta tecnológica :
  
  Nuestros productos funcionan con hidro-tratamiento de la onda de agua y fluidos basados en agua. El resultado reduce la tensión superficial, lo que significa mejor (mayor) características disolventes de estos fluidos. El agua (fluidos) son un medio ideal para la aplicación de cualesquiera de otras tecnologías físicas o químicas, que a su vez tiene una aplicación amplia en la industria, la agricultura y en nuestro estilo de vida.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  There are no other similar solutions known. Leer más
O-855Knowledge Innovation Market / España 1255

Solicitar información>> Compartir tecnología>>
Válvula para regular automáticamente el vaciado vesicular en pacientes caterizados

Catheter, urine, collecting bag, valve, bladder, vesical emptying, medical expendable, urology
- Descripción de la oferta tecnológica :
  
  Se trata de una nueva tecnología que consiste en una válvula que conectada a un catéter es capaz de retener la orina en la vejiga hasta que está llena y entonces automáticamente la suelta con los beneficios que este hecho trae al paciente. La nueva válvula es reutilizable. No existen tecnologías similares en el mercado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  There are not similar technologies on market. This is a very clever and innovative technology that solves several problems encountered with current catheters:
  
  1- Avoids deterioration of the bladder: long-term catheterized patients experiment a deterioration of the bladder since the muscle is not able to hold urine. With this technology the bladder retains urine until it is full and then automatically release it.
  
  2- Decreases the probabilities of urinary infections: the current catheters connect directly the collection bag with the bladder. The valve´s piston avoids this connection and decreases the probabilities of urinary infections.
  
  3- Reduce discomfort for catheterized patients: carrying a half filled collection bag during all day is really uncomfortable. With this technology we ensure to empty the bladder in once so most of the time the patient will bring an empty collection bag.
  
  Demonstration video available: http://youtu.be/KzG6CcNpews Leer más
O-231GAIKER, Technological Centre / España 1155

Solicitar información>> Compartir tecnología>>
Research and Development Projects R&D

Areas: - Biotechnology- Environment and Recycling - Plastics and Composites.
- Descripción de la oferta tecnológica :
  
  GAIKER-IK4 Technological Centre, is devoted to the up-take of own knowledge and to the development of new technologies that are later transferred to customers coming from sectors such as the Pharmaceutical Industry, Chemical Industry, Human and Animal Health, Engineering and Consultancy Firms, Public Administrations, Automotive Industries, Construction, Packing and Packaging, and Home Appliances, amongst others.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Contract Research and Development Projects R&D
  - Technological Services
  - Tests and Certification
  - Technological Training and Dissemination
  
  Areas:
  - Biotechnology
  - Environment and Recycling
  - Plastics and Composites.
  
  Sectors:
  Pharmaceutical Industry, Chemical Industry, Human and Animal Health, Engineering and Consultancy Firms, Public Administrations, Automotive Industries, Construction, Packing and Packaging, and Home Appliances, amongst others.
  
  Leer más
O-894GAIKER, Technological Centre / España 127

Solicitar información>> Compartir tecnología>>
Development of fire resistant thermoset and thermoplastic materials. Reaction to fire test laboratory, accreditted certificate ENAC nº 72/LE187.

Fire resistant material, thermoset material, thermoplastics material, resins, Coatings, intumesce, nano
- Descripción de la oferta tecnológica :
  
  Fire resistant thermoset and thermoplastic materials development and formulation.
  
  Transformation of materials through different technologies and process, RTM, SMC, Compression Injection
  
  Characterization of the materials, mechanical properties, thermal properties, UV absorption properties…
  
  Reaction to fire test, regulation:
  - Construction sector: EN 13501-1
  - Transport sector: CEN TS 45545-UNe 23727-90-NF F16101-Directive 95/28/CE
  - Electric and electronic sector: EN ISO 4589-EN ISO 60695-2 – EN 50267
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  New development of thermoset and thermoplastic materials.
  
  - Nanotechnology in order to improve materials properties like fire behavior, impact resistance, mechanical properties…
  - Combination of properties like: light weight materials with high mechanical properties and fire resistant coating
  - Materials with low environmental impact and use of recycled materials
  Leer más
O-185CER LITEM-UPC / España 1069

Solicitar información>> Compartir tecnología>>
Non destructive testing (NDT): model analysis & ultrasonic scan for composites

continuum-mechanics, mechanical-testing, Masonry, Composites, Biomechanics
- Descripción de la oferta tecnológica :
  
  The Laboratory for the Technological Innovation of Structures and Materials, LITEM, born at the end of 2004 as a research group. LITEM is an Interdisciplinary Research Centre of the Technical University of Catalonia. It is supported by a team of PhD Engineers with large amounts of experience in Strength of Materials and Continuum Mechanics.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Technologies for model analysis and determination of strength capabilities (reduced models).
  The list of facilities is:
  
  - Vibration: Impact Hammer (Brüel&Kjaer and software Pulse)
  - Ultrasounds: Omniscan Mx (Olympus)
  
  Leer más
O-1171University of Burgos / España 730

Solicitar información>> Compartir tecnología>>
Poliamidas aromáticas (aramidas) reticuladas

Aramid, aromatic polyamides, high performance fibers, crosslinked fibers, crosslinked aramids
- Descripción de la oferta tecnológica :
  
  Los nuevos polímeros reticulados de aramida han demostrado propiedades mejoradas, en particular, de aislamiento eléctrico, térmicas, de estabilidad, y/o mecánicas mientras que mantienen la facilidad de procesamiento. Además, las propiedades que muestran las nuevas aramidas reticuladas hacen que el producto sea especialmente adecuado para aplicaciones tecnológicas avanzadas. La reticulación se puede llevar a cabo en los procesos industriales actuales de producción de fibra de aramida.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Crosslinking of aramid fibers by conventional production technologies (wet, dry, and dry-jet wet spinning). The crosslinking of armid fibers will render materials with even higher fire, mechanical and electrical-isolation performance. Leer más
O-306Laser Consult Ltd. / Hungr 1320

Solicitar información>> Compartir tecnología>>
New sorbent for the removal of arsenic from drinking waters

technology transfer, IP, technology offer, technology request, patent
- Descripción de la oferta tecnológica :
  
  Technology to reduce arsenic content in water with more efficiently than any of the other known processes. Brand new nanotechnology-based sorbent material for the adsorption of the arsenic content of drinking waters. The invention was jointly patented with the MoD Electronics, Logistics and Property Management Company – MoD. ED Co., (Hungarian patent number P0800248). The research and development work resulted in a sorbent material that has an enormous specific area and hence is able to remove the arsenic content of waters much more efficiently than any of the known technologies today
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The offering client is a Hungarian SME. The profile of the company: research and development in the fields of industrial waste management, environmental protection, electrochemistry, chemistry.
  
  The importance of drinking water is continuously increasing all over the world. This is due to the fact that the world’s population is rapidly growing while the quantity of available water reserves is diminishing. Among the various water-contaminating materials, arsenic is one of the most dangerous components to human health. The arsenic content of waters can increase under natural circumstances as well, however, growth of arsenic content in waters can be also attributed to industrial and agricultural activities. Getting into the human body even a small amount of arsenic causes serious poisoning, or slowly developing illnesses like skin cancer. Because of the above, the arsenic concentration limit of drinking waters is defined more and more strictly. Compared to the former concentration limits of arsenic in drinking waters (50 µg/l then later 30 µg/l, or ppb), the actual level accepted by both the European Union (Directive 98/83/EC 1998) and by the US Environmental Protection Agency (US EPA 2002b) is 10 µg/l. Many drinking water sources cannot meet this strict requirement any more. As a result, arsenic removal technologies get more and more often into the focus of attention.
  
  The technology offer of our client is able to reduce arsenic content in water with more efficiently than any of the other known processes.
  
  Several technologies have been developed for the removal of the arsenic content of drinking waters. One of them is reverse osmosis. According to this technology the water is pressed with high pressure through a semipermeable membrane. Applying reverse osmosis all the contaminants and ions are removed. The disadvantages of reverse osmosis are its high costs and that the cleaned water must be re-salted after cleaning. Inorganic arsenic content of waters can be removed by precipitation and filtering, i.e., adding chemicals an insoluble arsenic salt is precipitated that can be filtered out. Arsenic containing organic compounds cannot be removed this way. Another disadvantage of precipitation is that unless the technological parameters are kept very strictly the efficiency of the removal is low. The most widespread technology for arsenic removal today is based on adsorption. The arsenic content of the water is adsorbed in a packed column, onto the surface of crystalline iron-hydroxide. The drawback of classical adsorption is that small iron oxide and iron-hydroxide particles easily get loose from the surface of the sorbent, hence arsenic re-enters the water and the cleaning efficiency deteriorates.
  
  The G.I.C. Industrial Servicing and Trading Ltd. developed a brand new nanotechnology-based sorbent material for the adsorption of the arsenic content of drinking waters. The invention was jointly patented with the MoD Electronics, Logistics and Property Management Company – MoD. ED Co., (Hungarian patent number P0800248). The research and development work resulted in a sorbent material that has an enormous specific area and hence is able to remove the arsenic content of waters much more efficiently than any of the known technologies today. Do to its unique structure and composition the new sorbent material can remove the organic arsenic content of the waters as well. Arsenic containing adsorbent particles do not re-enter the water. The technology can be implemented easily in both industrial and domestic scales.
  Production technology of the sorbent material is not expensive and consists of just a few chemical and physical steps. The support material of the special nano-scale adsorbent is produced by carbonization of agricultural by-products. According to the experiments, using the new sorbent arsenic content of a water with a 20-30 µg/l initial arsenic content can be reduced down to less than 0.2 µg/l (0.2 ppb), which is around the detection limit of arsenic and is definitely much lower than the strict official 10 µg/l concentration limit. Resulting from the outlined advantages, the new sorbent material is suitable for the dearsenification of drinking waters on both industrial and domestic scales using the flow-through adsorbtion technique.
  
  Main advantages:
  - by using this technology the sorbent material can be easily and economically manufactured
  - the sorbent material can be used at industrial and household scales as well
  - the manufactured sorbent material is able to bind the organic arsenic material as well as inorganic arsenic pollution
  
  Potential areas of user:
  The offered technology can be used by the water cleaning industry.
  Leer más
O-895GAIKER, Technological Centre / España 156

Solicitar información>> Compartir tecnología>>
Development of smart materials, design, formulation, transformation and characterization of magneto-rheological fluids, conductive polymers, memory shape polymers, piezoelectric materials and nano particles

smart material, smart textil, conductive polymer, shape change material, phase change material, Nanotech
- Descripción de la oferta tecnológica :
  
  Smart materials development, formulation, processing and testing of:
  
  - Magneto-rheological fluids: change their rheological characteristics under the influenceof a magnetic field. This change is reversible and instantaneous.
  - Compounds with different level of electrical properties: Piezo electric polymers, intrinsic and extrinsic conductive polymers.
  - Active material compound: thermoplastic and thermoset materials with active properties, antibacterial, photoactive, chromoactive…
  - Smart textiles: Development of filament with new properties like conductivity, memory shape, color change…
  - Smart structures development.
  - Integration of phase change materials.
  - Nanoparticles: synthesis processing, and characterization of nanomaterials, organic, inorganic and hybrid with different properties.
  
  Transformation of materials through different technologies and process:
  
  - Micro-encapsulation technology, supercritical fluid technology for extraction or impregnation, Injection,Compression,Infusion,RTM, SMC,
  
  Characterization of the materials, mechanical properties, IR, UV, rheological properties thermal properties, microscope TEM,SEM
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Development of thermoset and thermoplastic materials with new functions and improved properties
  
  - Nanotechnology in order to improve materials properties like fire resistance, impact resistance, mechanical properties…
  - Combination of properties: light weight materials with high mechanical properties and fire resistant coating
  - Materials with low environmental impact and use of recycled materials
  - Smart textiles
  - Active materials
  - Smart structures
  - Conductive polymers
  - Microencapsulation
  - Supercritical fluids
  Leer más
O-267University of Alicante / España 1816

Solicitar información>> Compartir tecnología>>
Solar energy use for water potabilization by electrodialysis

solar energy, Water, water potabilization, electrodialysis
- Descripción de la oferta tecnológica :
  
  Desalination of saline water for human consumption or irrigation by means of systems of electrodialysis powered by photovoltaic solar energy. The main advantages are that it is non-polluting and has a low maintenance cost. The technology is fully developed and useful for organisations dealing with water supply problems. A partner to set up the electrodialysis-photovoltaic system in its facilities and/or carry out feasibility studies is sought.
  
  The developed technologies could be of interest of companies, public bodies and organisations dealing with water supply problems. Companies or institutions interested in profiting water resources which come from brackish water. Users from engineering and industrial companies, waste water management firms, agricultural related companies, etc., could use this technology.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  A Spanish research group owns the know-how for the desalination of saline water for human consumption or irrigation by means of systems of electrodialysis powered by photovoltaic solar energy. The main advantages are that it is non-polluting and has a low maintenance cost. The technology is fully developed and useful for organisations dealing with water supply problems. A partner to set up the electrodialysis-photovoltaic system in its facilities and/or carry out feasibility studies is sought.
  
  Market applications:
  
  The developed technologies could be of interest of companies, public bodies and organisations dealing with water supply problems. Companies or institutions interested in profiting water resources which come from brackish water. Users from engineering and industrial companies, waste water management firms, agricultural related companies, etc., could use this technology.
  
  Innovative aspects:
  
  The desalination system makes use of renewable energy, so it is respectful with the environment and not contributing to the climatic change. Desalination system for remote areas with access to saline reservoirs, where the supply of electricity is particularly expensive or even non-existent, or for coastal zones where there are saline aquifers and the hydric resources are scarce.
  
  Main advantages of the technology:
  
  The system electrodialysis-photovoltaic generator is reliable, versatile and has low maintenance costs. The advantages of the use of the photovoltaic power are that is non-polluting; it is also silent; the fuel-sunlight- is free, abundant and a renewable resource, decentralized; long-life and the low maintenance cost due to the fact that it includes neither accumulation batteries, nor regulators/inverter. Electrodialysis process is more competitive than reverse osmosis process for desalination of brackish water.
  
  Leer más
O-982Gaiker, Technological Centre / España 798

Solicitar información>> Compartir tecnología>>
Nuevo e innovador preimpregnado más ligero, con propiedades mecánicas mejoradas, y buena resistencia al fuego

prepreg, thermoset, thermoset materials, thermoplastic, railway OEM, Construction, automotive OEM, shipyard, resins, resin, intumescent coatings, Coatings
- Descripción de la oferta tecnológica :
  
  Desarrollo y formulación de una nueva preimpregnación con propiedades mecánicas mejoradas. Con nuestro preimpregnado es posible transformar y obtener piezas de moldeo a baja presión. Los costes de fabricación de moldeo son bajos y la presión requerida es también baja, por lo que hay costes de inversión más bajos que los procesos convencionales. También es un buen material y proceso para la producción de alto volumen.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The investment cost is lower that with other technologies, lower cost of the mold and lower cost of the machines it is possible to work at low pressure compression.
  Prepreg that could be combinated with:
  - Nanotechnology in order to improve materials properties like fire behavior, impact resistance, mechanical properties, coating…
  - Materials with low environmental impact and use of recycled materials
  
  Characterization of the material, mechanical properties higher than convetional ones, and good fire resistant to fire according to
  Regulation:
  - Construction sector: EN 13501-1
  - Transport sector: CEN TS 45545-UNe 23727-90-NF F16101-Directive 95/28/CE
  - Electric and electronic sector: EN ISO 4589-EN ISO 60695-2 – EN 50267
  Mechanical properties:
  Bending resistance: 300 MPa. Bending modulus: 15.000 Mpa. Impact resistance: 90Kjoules/m Leer más

1 2 3 4 5

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en catalytic technologies : Oportun... | Ofertas

Innovación en catalytic technologies : Oportun... | Ofertas

Organic matter remowal, wastewater treatment, catalytic technologies, innovative, Oxidation process

dehalogenation, catalytic hidrodechlorination, decontamination of effluents, clean technology, catalytic technology, chemicals, petrochemicals, fine chemicals, chemical engineer

catalytic advanced oxidation, catalytic oxidation, organic matter removal, Water, catalytic reactions, effluents, industrial effluent treatment, wastewater, sewage

nitrates, Water, drinking water, catalysis, nitrites, potable water, catalytic hydrogenation

wireless, mobile payment, payment technologies, online payment, payment, smart phones, cell phones, SIM card, mobile credit cards, Mobile banking, mobile ticketing

Chemistry, Catalyst, catalysis, combustion, NOX, HC, CO, exhaust, gas, stream, zeolite, trap.

Drug delivery, drug formulation, Abuse resistant, tamper resistant, pharmaceutical, pain

active packagingcoatings, antimicrobial, Microencapsulation, supercritical fluids, spry-drying, odour

Solubility, bioavailability, Cocrystals, Solid form screening, Solid form characterisation

Pectus Excavatum, Pectus Plate, Pectus UP, medical devices, Design & Production Engineering

adhesives, dioxin, electrocoagulation, holographic, wastewater, hepatitis, electrodialysis

amination technologies, amine, amines, amination, fine chemicals, APIs, agrochemicals, alkenes, olefins, acetylenes, allylic ethers, dienes, pharmaceutical drugs, synthetic chemist, Chemistry

human, body, analysis, Diagnostic, personal, injury, valuation, treatment, rehabilitation, EMG,

signaling technologies, Signaling technology, traffic safety, traffic control, traffic lights, traffic, brackets, poles, LED

Education and training, e-Learning, voice recognition, communication, information

waste, respirometry, Biogas, compost, digestate, stability, biodegradability,

Organic compounds, environment research, gas streams, catalysts, dichloroethane, PVC, plastics

cinchona, alkaloid, cinchona alkaloid derivatives, Catalyst, catalysts, quinine, quinidine, chiral building blocks, active ingredients, metal free catalysis, cascade reactions, catalytic, building block, chemical libraries, chiral synthesis

technology, innovation, integration, blow, extrusion, Plastic, molding

green technologies, environment, energy, Repowering, offshore, power converter, induction generators, turbines, power plant, wind, wind power, Wind farm

Water, water treatment, effluent water, waste water treatment, WWT, irrigation, biofilm, aquaculture, RAS, sugar, food & drinks processing

There are no other similar solutions known. Leer más

Catheter, urine, collecting bag, valve, bladder, vesical emptying, medical expendable, urology

Fire resistant material, thermoset material, thermoplastics material, resins, Coatings, intumesce, nano

continuum-mechanics, mechanical-testing, Masonry, Composites, Biomechanics

Technologies for model analysis and determination of strength capabilities (reduced models). The list of facilities is: - Vibration: Impact Hammer (Brüel&Kjaer and software Pulse) - Ultrasounds: Omniscan Mx (Olympus) Leer más

Aramid, aromatic polyamides, high performance fibers, crosslinked fibers, crosslinked aramids

Crosslinking of aramid fibers by conventional production technologies (wet, dry, and dry-jet wet spinning). The crosslinking of armid fibers will render materials with even higher fire, mechanical and electrical-isolation performance. Leer más

technology transfer, IP, technology offer, technology request, patent

smart material, smart textil, conductive polymer, shape change material, phase change material, Nanotech

solar energy, Water, water potabilization, electrodialysis

prepreg, thermoset, thermoset materials, thermoplastic, railway OEM, Construction, automotive OEM, shipyard, resins, resin, intumescent coatings, Coatings

Usuario nuevo (registro gratuito)

Usuario registrado

Technologies for model analysis and determination of strength capabilities (reduced models).
The list of facilities is:

- Vibration: Impact Hammer (Brüel&Kjaer and software Pulse)
- Ultrasounds: Omniscan Mx (Olympus)

Leer más