Innovación en temperature : Oportunidades ...

1 2 3

O-794Laser Consult Ltd / Hungr 1119

Solicitar información>> Compartir tecnología>>
Producción continua de biodiesel a temperatura ambiente

biodiesel; room-temperature;
- Descripción de la oferta tecnológica :
  
  Nuestro socio, un Instituto de Hungría ha desarrollado un novedoso proceso continuo para la producción a temperatura ambiente de biodiesel. La principal ventaja de esta tecnología es evitar la formación de "soap" que hasta el momento causa muchos problemas en la producción de biodiesel (formación de la emulsión, problemas de lavado, separación de fase lenta, etc). Ellos están interesados en un acuerdo de licencia o la venta de equipos de producción.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Vegetable oil methyl esters are generally produced at 60 °C in the presence of 1 % KOH/NaOMe catalyst with stirring for 15-60 min. The main technological problem is the soap formation which causes a series of problems in washing and separation technology of the pure product. Our experiments showed that the high temperature (which causes by reactions with soap formation) needs only to reach an appropriate reaction rate. This reaction is very slow at room temperature because the interaction takes place only at the surface of the two non-miscible phases, methanol and vegetable oil.
  Leer más
O-1089empresa anónima / India 524

Solicitar información>> Compartir tecnología>>
Use of plate heat exchanger (PHE) to control dough temperature and excellent energy saving

plate heat exchanger, Food, food technology, food technologist, Dairy
- Descripción de la oferta tecnológica :
  
  PHE is a device consisting of thin plates built in such a way that there are two inlets and two outlets. We can transfer the temperature of chilled water to nor
  
  One 10 t chilling system only for process water and one 5 t water cooling system for jacketing of mixer and creamer which was insufficient and leading to high dough temperature and blisters in biscuits. we used to get around 18 – 20 deg c temperature in process water from 10 t chiller and 25 to 39 deg c in jacket water from 5 t water cooler.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Requirement of materials:
  
  1.One chiller of capacity 10 ton blustar make.
  2.Two plastic tanks of 1000 litre capacity i.e tank 1 & tank 2 in line diagram for jacket water.
  3.One 1000 litre capacity ss tank i.e tank 3 for process water.
  4.Two pumps of 2 h.p and 3 phase for circulating water inbetween chiller, phe, storage tanks and mixers jackets.
  5.1 h.p ss pump for circulating watr through phe and ss storage tank storing water for process.
  
  6.One phe of alfa level make.
  
  7.2 “Pipes and accessories..
  
  Power saving after installation of PHE
  
  For chilling units - 8.8 kw x 17 hrs = 147 units and circulating and transfer pumps 3.75 kw x 17 hrs = 64 units = total 211 units x rs 8 = rs 1688 per day.
  
  Saving – (2208 – 1688) – rs 520 per day.
  
  Existing system:
  
  1. We were using one chilling plant of 10 ton capacities for providing chilled water in process.
  2. Two water cooling units of 3 ton and 2 ton to provide cold water circulation in mixer and creamer jackets.
  3. Considering the plants run for 70 % of total working hours i.e 17 hrs total electricity cost.
  4. For chilling units - (8.8 + 3.4 + 1) kw x 17 hrs = 225 units and circulating and transfer pumps 3 kw x 17 hrs = 51 units = total 276 units x rs 8 = rs 2208 per day.
  
  Problem was facing:
  
  One 10 t chilling system only for process water and one 5 t water cooling system for jacketing of mixer and creamer which was insufficient and leading to high dough temperature and blisters in biscuits. we used to get around 18 – 20 deg c temperature in process water from 10 t chiller and 25 to 39 deg c in jacket water from 5 t water cooler. Leer más
O-1130Pointjust s.l. / España 834

Solicitar información>> Compartir tecnología>>
Nueva tecnología de control de cocción de alimentos, basada en conocer como se distribuye la temperatura en su interior mientras se cocina y anticipar su evolución.

Food, technology, cooking, grilling, control, Happcc, meat, fish, steack, perfect, cook, grill
- Descripción de la oferta tecnológica :
  
  Haz el filete perfecto y repítelo cuando quieras. Point Just es una respuesta a las preguntas a las que todos los cocineros se enfrentan a la hora de buscar el filete perfecto.
  
  Cuál es la cantidad apropiada de calor? ¿Cómo se transmite el calor dentro de la carne? ¿Cuándo debo darle la vuelta y cuando tengo que sacarlo del fuego? ¿Cómo afecta la temperatura inicial de la carne a su cocción? ¿Qué influencia tiene el tipo de producto sobre cómo se cocina? ¿Por qué es diferente la carne del pescado? ¿Qué influencia tiene el grosor de la carne a la hora de cocinarla?
  
  La cocción de los alimentos es el último paso en su preparación y determina la calidad del producto final. Si el resultado de la cocción no es el esperado, los comensales lo rechazaran, porque la carne esta poco hecha o demasiado cocinada.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  What is the appropriate amount of heat? How is the heat transmitted inside the steak? When should I turn it over and when do I have to remove it from the heat? How does the initial temperature of the steak affect its cooking? What influence does the type of product have on how it’s cooked? Why is meat different from fish? How does thickness influence cooking?
  
  The cooking of the food is the last step in its preparation and determines the quality of the final product. If the result of the cooking is not what is expected, the diner will reject it, because the steak is too rare or overcooked.
  
  Until now, too much attention has been paid to the heat. This is one of the factors that affect cooking performance, but not the only one. The type of food, the thickness of the food, its initial temperature, or how it receives and transmits the heat internally, are also decisive in the end result of the cooking.
  
  Our technology is based on knowing how the temperature is distributed within the steak during its cooking, and predicts its evolution. On this basis, our software manages the cooking process to get your perfect steak.
  
  We have develop a hand fitted device, using low-cost electronics, temperature control (thermocouples), distance measurement, and computer literacy, the value is added by our knowledge of cooking processes, with which we will guide the cook to prepare his perfect steak.
  
  Our technology obtains information from inside the food during cooking, it analyses it in real time and anticipates its development, both in the heat-receiving surface (which will define its outer finish), and the interior of the food (which will define its cooking point).
  
  Based on this, it sends simple instructions to the cook (Increase heat, reduce heat, turn me over, remove me from the heat), to adjust the cooking to the characteristics and performance of the particular piece of food, guiding the cook to his aim. Leer más
O-1063UATEC - Technology Transfer Office of University of Aveiro / Portugal 942

Solicitar información>> Compartir tecnología>>
Termómetro molecular luminiscente

Molecular thermometer, temperature sensors, sensors, temperature
- Descripción de la oferta tecnológica :
  
  Científicos de la Universidad de Aveiro y una institución española han desarrollado un termómetro molecular luminiscente que es capaz de enviar información con alta resolución espacial acerca de la temperatura absoluta en la forma de señales de luz que se pueden detectar con alta sensibilidad y persistencia. El termómetro molecular luminiscente puede ser procesado en medios poliméricos o integrado en un híbrido orgánico-inorgánico matriz a base de siloxano. Se busca socio industrial interesado en la licencia de esta tecnología.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  In its current state of development, the molecular thermometer qualitatively exceeds current performances in accuracy, space resolution, reliability and ease of use. The molecule, however, and the host matrix, accept modifications that can further extend thermometric properties and commercial uses, e.g., maximum temperature sensitivity can be tuned to specific temperature ranges and wavelength emission can be moved towards ad hoc ranges for specific applications, like near infrared range where biological tissues have minimum absorption. These developments are currently under investigation by the Team. The molecular thermometer can also be processed in different matrixes, e.g., in a ureasil matrix as paint, to enable new applications and possibilities: microelectronics, catalysis, etc. As a molecular system it allows fine tuning to optimise its response at each specific application Leer más
O-614KIM / España 1254

Solicitar información>> Compartir tecnología>>
Sistema de construcción que actúa como material aislante al ruido y la temperatura con propiedades antisimicas

ceramic, Construction, buildings, noise barrier, sound barrier, acoustic system, sound-absorving, Weather, seismic, earthquake, wall, block, brick, insulating materials
- Descripción de la oferta tecnológica :
  
  El producto es un sistema de construcción de cerámica, que actúa como material aislante al ruido y la temperatura. Se ha diseñado para que sea limpio y más eficaz en sus propiedades, sus costes y tiempos respecto otros productos aislantes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  We have developed a new product, which can be used as isolating material to sound and temperature with antisimic properties. This system is designed to be more competitive than others isolating materials, it is more effective as sound tests certifies, clean and more effective in cost and time (you can make it very quickly with less workers) and includes a system of channels for the easy insertion of cables and pipes, hence the interest in this technology. We are interested in licensing the use of this product for further development towards commercialization outside Spain.
  
  New and innovative aspects of the technology:
  
  - It comprises two ceramic pieces with a layer of expanded polystyrene fixed inside. With only a layer of blocks, the system is able to create a double wall with insulation chamber only in one step, saving time, costs and labour.
  
  - It includes a system of channels which can be placed horizontally and vertically inside the blocks, allowing the easy insertion of cables and pipes without having to make channels in the walls. The junction boxes are inserted in the blocks, alongside the channels containing the wires.
  Leer más
O-1160University of Louisiana at Lafayette / Estados Unidos 1189

Solicitar información>> Compartir tecnología>>
Método para la preparación de temperatura ambiente de Titania nanoesferas magnéticas recubiertas y otros Nanoestructuras

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal
- Descripción de la oferta tecnológica :
  
  El dióxido de titanio (óxido de titanio) es uno de los productos químicos más demandados del mundo debido a su alta versatilidad de uso. Investigadores de la Universidad de Louisiana en Lafayette han desarrollado un método para la preparación de compuestos, nanoesferas compuestas de un núcleo de ferrita de níquel y que tiene una cáscara de dióxido de titanio (óxido de titanio) con actividad fotocatalítica y germicida. Esta tecnología utiliza una metodología química micela inversa patentada que no requiere maquinaria cara o temperaturas elevadas. (Ref. US7504130, US7964013, US8197890, US7635518).
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Permits 100% titania availability and minimizes nonavailable, internal titania waste (in contrast to mixed
  titania / ferrite composites);
  • Modified reverse micelle chemistry is performed at room temperature and without the need for
  expensive machinery;
  • Permits removal of titania nanoparticles from liquid solutions and environmental sources (a current EPA concern) via magnetic manipulation;
  • Demonstrated germicidal and photocatalytic coating for industrialand biomedical uses;
  • Reusable means of decontamination, chemical reduction (N2 & CO2) and catalysis;
  • Other preferred applications of this technology include custom shaped magnetic nanorods
  (US8197890, US7635518) and nanospheres for ultrahighdensity storage media (US7964013). Leer más
O-1051Knowledge Innovation Market / España 888

Solicitar información>> Compartir tecnología>>
Ducha inteligente - Dispositivo electrónico para crear su concepto de ducha inteligente y llevarla al mercado

Smart shower, shower, showers, bath, Bathroom, water efficiency, Water, spa, wellness, hotels, Legionella
- Descripción de la oferta tecnológica :
  
  Un dispositivo electrónico que permite de forma precisa y estable el control termostático de caudal de agua y la temperatura en el punto de uso. Diseñado para ser integrado en las duchas, columnas, cabinas o zonas de baño. La regulación simultánea de estas variables se abre innumerables posibilidades de diseño, confort y eficiencia, así como las percepciones multisensoriales y terapéuticos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  100% electronic based regulation
  a. Electronic regulation. Without engines, mechanical parts or cartridges that must be handled or substituted
  b. Smart self-calibration. No need to calibrate during installation neither operation
  c. Precision and stability of temperature and flow rate to changes on pressure or temperature
  d. Superior implementation of user safety features (maximum temperature water limitation, thermal shock against Legionella bacteria, etc)
  
  High connectivity, integration and control
  a. Water efficiency. Obtain control over consumption parameters and help your customer create profiles to meet efficiency policies in water consumption (WELL, LEED, etc)
  b. Connect to any home and building automation system Leer más
O-1119MP Lighting Inc / Canadá 1916

Solicitar información>> Compartir tecnología>>
Innovadora tecnología de refrigeración a base de la combinación de disipador de calor y ventilador (sistema de enfriamiento activo)

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics
- Descripción de la oferta tecnológica :
  
  El sistema de refrigeración se ha simplificado extremadamente mediante la conexión de la matriz de termistores directamente en la línea de alimentación del ventilador de tal manera que pueden hacer una doble función al mismo tiempo: sensores de temperatura y de la corriente operacional del ventilador. Podemos proporcionar pequeño tamaño de la matriz mediante el uso de termistores de SMD resistencias térmicas, por lo que podría ser colocado muy cerca del objeto de refrigeración (disipador de calor, etc.) Tampoco se necesita una fuente de alimentación adicional, excepto para el ventilador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The original active cooling system was developed on the base new concept using of matrix of NTC thermistors for thermal management of LED lamp. The NTC thermistor array has been connected directly in the power line of the fan. Being thermally coupled to heat sink of LED lamp and electrically coupled to fan the NTC thermistor array capable to perform double function in the cooling system: changing its resistance by means of changing of temperature of heat sink (acting as temperature sensor) and changing of current through fan by means of changing its resistance (acting as current regulator).
  
  As result the configuration of active cooling system is simplified significantly and its size, weight and cost price have been reduced. This active cooling system was realized as “cooling module” which integrates heat sink, fan and intermediate plate - thermo conductor (with NTC thermistor array inside) for LED’s PCB attaching.
  
  A lot of samples of “cooling module” were prototyped and tested with various kind of LED lamp in the range of output power (10 – 40) Wt and DC fan 12V; 1Wt. Cooling system consumes power no more than (3-6) % of output power of LED lamp and provide thermo regulation of LED’s PCB in LED lamp with accuracy (+/- 5*C) in the range (45-65) *C temperature of LED’s PCB under full load of LED lamp. Leer más
O-1052University of Alicante / España 637

Solicitar información>> Compartir tecnología>>
Nuevo dispositivo para la determinación simultánea de adsorción de mezclas de gases binarias en adsorbentes sólidos

gas analysis, gas mixture, Gas mixtures, gas storage, gas drillingg, gas, oil drilling, environmental, energy, catalysis, air filters, air purification, air, recycling, chemicals
- Descripción de la oferta tecnológica :
  
  Investigadores de la Universidad de Alicante han desarrollado un nuevo dispositivo capaz de determinar las cantidades individuales de los gases en una mezcla binaria que se adsorbe de forma simultánea en un sólido poroso. Se trata de un dispositivo práctico y económico que reduzca drásticamente el tiempo de análisis y se puede utilizar en los siguientes sectores industriales: medio ambiente, energía, catálisis, almacenamiento de gas, y así sucesivamente. Ambos factores hacen que su comercialización sea muy fácil. Los investigadores están buscando empresas que adquieren esta tecnología para fines comerciales.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  • This system is thermostated and temperature can be adjusted to the desired experimental conditions.
  • It is possible to implement in the volumetric device other suitable elements to determine density (e.g., elements based on measurement of resonant frequency, and so on).
  Leer más
O-1154University of Louisiana at Lafayette / Estados Unidos 1423

Solicitar información>> Compartir tecnología>>
Nanoestructuras Magnéticas dendríticas y método para fabricarlas

Nanorods, dendritic, magnetic nanostructures, nanoparticle, Nanostructures, Nanowires, nanotubes, nanomanufacturing, electrochemistry, chemical vapor deposition, supercapacitors, chemical, Chemistry
- Descripción de la oferta tecnológica :
  
  Descripción de las nanoestructuras magnéticas compuestas por un conjunto de "nanorods" magnéticos unidos por fuerzas dipolo en un patrón dendrítico y su método de fabricación. Las nanoestructuras magnéticas dendríticas se preparan a temperatura ambiente mediante la aplicación de un campo magnético a un sistema micelar inverso en el que al menos una sal de un metal magnético se precipitó dentro del núcleo de la micela inversa. Este método de fabricación ofrece ventajas técnicas signfifcantes respecto los sistemas existentes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Quasi one-dimentional magnetic nanostructures, such as nanorods, nanowires, and nanotubes have attracted significant scientific and technological interest because they exhibit unique magnetic properties not displayed by their bulk or nanoparticle counterparts. A variety of methods have been proposed for synthesizing various types of nanorods. And, while these methods have yielded varying degrees of success, they all are faced with the same common problems associated with chemical and physical processes, such as high cost, aggregation and coarsening of particles at elevated temperatures, and shape control, all of which limits their applications. We present here a novel fabrication method based on the reverse micelle method to produce magnetic nanorods of a dendritic fashion in repose to an applied magnetic field at room temperature. This technology offers an efficient, cost-effective method of nanostructure fabrication, and also for magnetic nanostructres having unique morphologies, that hold great potential for reducing costs of nanostructure manufacturers. Leer más
O-872University of Seville / España 2284

Solicitar información>> Compartir tecnología>>
Proceso de reducción de emisiones de SO2 y CO2

CO2, reuse of industrial waste, SO2, acid rain, greenhouse gasses, detergents, calcite
- Descripción de la oferta tecnológica :
  
  El Instituto de Ciencia de Materiales de Sevilla (CSIC), junto con la Universidad de Sevilla y la Universidad de Cádiz, han patentado un proceso que permite la captura mineral de los gases de efecto invernadero y la lluvia ácida que produce CO2 y SO2, respectivamente. El proceso se basa en la reutilización de residuos industriales ricos en calcio producido por varios procesos industriales, y se desempeña a temperatura ambiente y en el aire abierto, haciendolo así más fácil y más barato que los procesos similares.
  
  La invención es un proceso de captura de CO2 y SO2. Combina dos subprocesos: la captura de CO2 a través de una gestión inteligente de desechos húmedos con un alto contenido de calcio y el uso del producto para la captura mineral de CO2, calcita, con el fin de fijar SO2.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The process allows atmospheric CO2 and SO2 gasses to be captured directly from the environment.
  
  The process uses materials from industrial waste as reactants without needing to treat them prior to use.
  
  Materials for later use are generated from the process like Na2SO4, which can be used for the the production of detergents, calcite (CaCO3) or gypsum (CaSO4). There is also the possibility for designing other processes depending on the product.
  
  The process does not use calcination and carbonation cycles since it is performed at room temperature, resulting in the facilitation and reduction of the same. Leer más
O-1217European University of Madrid/Universidad Carlos III / España 351

Solicitar información>> Compartir tecnología>>
Método para clasificar el tráfico de vehículos

Smart cities, vehicle, traffic
- Descripción de la oferta tecnológica :
  
  La innovación se refiere a un método que permite la clasificación de tráfico de vehículos a lo largo de un camino que tiene uno o más carriles. El método permite la determinación de cuando un vehículo ha pasado y la determinación de los parámetros de dicho vehículo tales como la velocidad o el tipo de éstos, en el que dichas mediciones no se ven afectadas por factores que pueden afectar a los sensores, tales como los cambios de temperatura o la interferencia de sensores de proximidad, entre otros.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Within the variety of techniques that you can use to count vehicles, employees most frequently are those using sensors located on the pavement. Can be cited as examples the Pneumatic hoses, inductive loops, piezoelectric sensors, sensors based on fiber optic cables etc.These systems present several disadvantages, including the difficulty that entails installation (as it is the case of the inductive loops that have to be installed under the pavement), the safety of personnel responsible for performing the installation or the need to interrupt the traffic for the installation in the case of the hoses, the piezoelectric sensors and fiber optic cables. One of its disadvantages is the deterioration suffered by these devices by the passage of vehicles.
  
  The effectiveness of these systems may also depend on characteristics of the via (several lanes) and adverse weather conditions.A first alternative that prevents the installation directly on the pathway or beneath the surface of the track is to make use of non-intrusive techniques. Non-intrusive techniques that you can use in the count of vehicles are very different between them are what make use of sensors of infrared (IR), magnetic sensors, acoustic sensors, video, radar, ultrasound, etc.While the technique based on the analysis of the images recorded in video provides a large amount of data (number, category and speed of vehicles) and is easy to implement, it has been found that there are many factors that affect the performance of these systems: stationary and moving shadows, direct sun, light-dark transitions, errors in the operation of the software etc. Relation to acoustic systems, these problems in the detection of vehicles at rest and in situations of high traffic density. The radar is also commonly used but presents the disadvantage of its high cost and require calibrations frequent, also expensive. There are also devices based on the use of two Ultrasonic sensors tuned to two different frequencies and are located in two separate high supports. Sensors detect the passage of vehicles and make a classification of these according to your profile.
  
  This device is designed to detect and classify vehicles entering garages and building entrances. Even though such devices are suitable for low speed conditions and well preset parameters at the time of the Assembly, are not suitable in situations in which the speed of the vehicles is high (expressways) since it is not possible to draw the profile of the vehicle with precision, the presence of disturbances due to temperature changes, influence of high levels of noise and interference between sensors next make it is not appropriate for this type so demanding application.The present invention provides a method that makes use of ultrasonic distance sensors in such a way that, although the sensors are affected by disturbances such as those mentioned, this method allows to discriminate when a vehicle has passed, quickly takes and some parameters that characterize its type. Leer más
O-853University of Alicante / España 1039

Solicitar información>> Compartir tecnología>>
Nuevo método para la síntesis controlada de sólidos mesoporosos

catalyst catalysis chemical chemistry heterogeneous metal environment mesoporous
- Descripción de la oferta tecnológica :
  
  El grupo de investigación ha desarrollado un método para obtener sólidos mesoporosos de cualquier tipo de sal de POM. El método es bastante simple y la reacción de síntesis, de acuerdo con el catión utilizado, es controlada por la temperatura y el pH.
  
  • Nueva técnica de síntesis de catalizadores.
  • Permite un fácil control de volumen, tamaño y número de poros.
  • Genera un alto volumen de mesoporosidad (hasta 300% de la porosidad inicial de la sal de POM original).
  • Permite una distribución homogénea de la porosidad dentro del núcleo de la matriz sólida.
  • Reduce el uso de metales nobles.
  • Respetuso con el medio ambiente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Mesoporous solids are compounds used as catalysts and also as catalysts support in many chemical reactions.
  
  Catalysts are chemical compounds that increase speed reaction without modifying its own chemical characteristics. Same of them are used in the same phase that reagents and they are called homogeneous catalysts. Other are supported or imbedded in a porous surface, so called heterogeneous or contact catalysts.
  
  Most of the catalysts are extremely environmentally dangerous, as they are based in H2SO4 and HF, or very expensive, as they include noble metal compounds.
  
  In order to solve it, intense research in the latest decades has come up with catalysts based on polyoxometalates (POM). POM are a large family of nanoscale metal-oxide anionic clusters that combine easily with external positive ions to achieve electroneutrality.
  
  Regarding catalysis, POM group based on Keggin molecular structure is the most interesting because it confers them acid properties and great solubility in watery solutions. In that case, positive ions are protons and compound is called heteropolyacid (HPA). It has applications as homogeneous catalysts.
  
  POM can also be used as heterogeneous catalysts when replacing positive ions by cations to obtain the corresponding insoluble salt: the cation combined with the POM determines degree of solubility, thermal stability, acidity and porosity of the salt. These catalysts must provide a great superficial area, i.e. a great number and size of porous to provide a big number of loci to adsorb catalysed reactions.
  
  Nowadays, according to the cation used (ammonium, caesium) specific surface of about 100 m2/g (microporosity) may be achieved, but mesoporosity does not appear or it happens under no control.
  
  The research group has developed a method to obtain mesoporous solids from any kind of POM based salt. Method is quite simple and synthesis reaction, according to the cation used, is controlled by temperature and pH. Leer más
O-1009DeltaTech-Korea / Corea del Sur 731

Solicitar información>> Compartir tecnología>>
Cirugía estética con reducción de los efectos secundarios

fat surgery, beauty, losing weight, body fat, medical devices, plastic surgery, lipo aspiration, liposuction
- Descripción de la oferta tecnológica :
  
  Esta tecnología esta especialmente diseñada para personas interesadas en la belleza y pérdida de peso. Se supervisa el estado de salud del cuerpo humano en tiempo real y las guías de la cantidad limitada de grasa del cuerpo a ser removido sin efecto secundario. Se evita la situación de emergencia durante el procedimiento de eliminación de la grasa corporal y reduce el riesgo de efecto secundario.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This technology maximizes the effectiveness of the beauty with maintaining balance of the body’s percentage of body fat during fat removal procedure. It applies HifU(High-Intensity Focused Ultrasound) to heat and remove body fat with monitoring the health status such as blood pressure, blood sugar, pulse, body temperature, electrocardiogram, body fat percentage, blood viscosity, blood fat concentration etc. It prevents the emergency situations from procedure of body fat removal by diagnosing based on the health status of the patients and controlling therapeutic devices. Also, it minimizes the side effects after the procedure. Leer más
O-789University of Alicante / España 1214

Solicitar información>> Compartir tecnología>>
Nuevo método para producir nanopigmentos no tóxicos y biodegradables

color, pigment, nano, dye, paint, organic, inorganic, Hybrid
- Descripción de la oferta tecnológica :
  
  Un pigmento híbrido es una mezcla controlada entre material orgánico e inorgánico. Como material inorgánico podría ser utilizado varios tipos de arcillas por sus propiedades nanoscópicas y, como material orgánico, colorantes naturales o sintéticos (thermochrome, eletrochrome, luminiscencia, etc.)
  
  El grupo de investigación ha desarrollado un nuevo método para producir pigmentos híbridos nanoestructurados con propiedades ópticas y coloidales específicas de acuerdo a los parámetros de producción. Principalmente, la customizaton del comportamiento de estos materiales se consigue mediante el control del ratio material orgánico / inorgánico.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This method has two stages:
  
  1) Dispersion of, at least, an inorganic material in water.
  2) Addition of, at least, an organic coloring solubilized by agitation.
  
  The following parameters might be changed in order to obtain different kinds of nanopigments:
  
  • Inorganic material concentration.
  • Organic coloring concentration.
  • pH.
  • Temperature.
  • Ionic strength.
  
  The optical response of nanopigments changes as a function of the particle size of the inorganic material (or materials) used by the diffusion.
  
  This method makes it possible to produce new hybrid nanopigments with optical and colloidal properties for tailored applications. Mainly, the customizaton of the behaviour of this materials is achieved by controlling organic/inorganic ratio in the material.
  
  The morphology of the material is hybrid (laminar/fibrillar). The organic coloring is selected among different types: azoic complexes, metallic, sulphurose, iminoquinone, antraquinone, ftalocianine, etc. In general words, they can be both natural or synthetic.
  
  Products can be used in printing inks, painting and dyes, paper, synthetic or natural fibers, polymer materials, cosmetics, etc.
  
  With this method the following features can be achieved:
  
  Color range control: Through the control over the different spectral species, the optical response is modified too, so the color range can be enlarged.
  
  Increase in the colouring power: The ability of the material for increasing the absorption on the surface is linked to three parameters. First, absorption coefficient of the nanopigment in relation to the coloring solution coefficient. Second, light dispersion caused by nanoparticles and addtiional coverage of the surface to fill. Third, reology and fisico-chemical properties of the material are able to obtain homogeneous dispersions.
  
  Environmental impact reduction: Some of the usual pigments contain heavy metals in its composition while inorganic solids used in this method are free of heavy metals and can even be used in cosmetics. Natural coloring can be combined with these nanopigments and obtain a new product which will be environmental safe. Leer más
O-1023DeltaTech-Korea / Corea del Sur 1545

Solicitar información>> Compartir tecnología>>
Suministro médico de terapia génica para transportar genes de virus mediante el uso de proteoliposoma

proteoliposomes, proteoliposome, virus, viruses, Gene therapy, recombinant adenovirus, cancer, genes, gene delivery, gene expression, viral vectors, DNA, Biotechnology
- Descripción de la oferta tecnológica :
  
  La Universidad de Corea ha desarrollado una nueva terapia génica utilizando un nuevo proteoliposoma (PL) mediante la combinación de adenovirus recombinante (Ad) y el liposoma. Esta tecnología mejora la eficiencia de la administración génica adenoviral y la estabilidad del Ad lo que permitiría el uso de una dosis más baja y un tiempo de almacenamiento más largo. Además, induce actividades anti-inflamatorias y antioxidantes. Por lo tanto, se puede utilizar para tratar el cáncer de una manera sinérgica. La universidad de corea busca un acuerdo de licencia y Recursos Financieros.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The technology has been created a proteoliposome (PL) as a new gene therapy by combining Recombinant adenovirus (Ad) and liposome. Ad is highly efficient at transferring genes into a wide range of cells and species. However, even though Ad has a high level of gene delivery and expression, use has been limited because Ad can induce inflammation and Ad is not stable when stored at room temperature. Conversely, the use of non-viral vectors, such as cationic liposome containing a fragment of DNA, to mediate gene delivery has become common because non-viral vectors are less immunogenic, although they have lower delivery efficiency and specificity. So, the technology has been created a new PL comprising phospholipid, cholesterol, wildtype (WT) apolipoprotein A-I (apoA-I) or its variant (V156K), and Ad to maximize viral stability, infection ability, and gene delivery efficiency, while minimizing unwanted side effects.
  Leer más
O-1237empresa anónima / Arabia Saudí 74

Solicitar información>> Compartir tecnología>>
A desalination concept which combines the working principles of conventional steam ejectors and those of evacuated tubes to result into a solar thermal ejector for the purpose of reducing energy and equipment to save desalination costs.

low tech desalination, small scale, ejector, solar termal, desalination
- Descripción de la oferta tecnológica :
  
  We propose here an open desalination concept which uses solar thermal energy and simulates the rain cycle to reduce energy in which further the steam is forced into the diverging section of the solar thermal steam ejector causing it to expand and in which the cross sectional area of the ejector outlet is suitably larger than the cross sectional area of the ejector throat which cause the steam to attain high velocities reaching the speed of sound as well as generate shock waves which increase the mass flow of the steam forcing it into the steam line without mechanical pumps thus reducing the amount of equipment and hence also reduce energy and equipment use to reduce overall desalination costs.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Existing desalination plants operate at a low efficiency of around 10-20%. This is mainly because the system was designed back in the 1950’s when energy supply was readily available and water shortage was not so severe. Their design is LINEAR and rely on increasing their size for more output hence their low efficiency. Around 80% of the seawater is rejected to the sea at high temperature and hence a considerable energy loss. Large intake structures, boilers, evaporators, pressure reducers, pumps and other equipment are therefore needed to handle this large amounts of seawater. This increases the installation, processing, operation and maintenance costs which increases the overall cost of the process.
  
  Solar energy is available for most of year in tropical areas facing water shortages. This because existing desalination equipment cannot make direct use of solar energy shortages. The solar thermal ejector absorbs and retain solar thermal heat to overcome this problem. Also the internal flow is vortical and NONLINEAR and relies on internal shape nozzle constrictions rather than increasing external equipment size. Leer más
O-1118IK4 - IKERLAN / España 547

Solicitar información>> Compartir tecnología>>
Calefactores personalizados transparentes y platos calientes, integrables con fuentes multifísicas

chemical synthesis, microfluidics, cell culture, hot plates, heaters, API synthesis
- Descripción de la oferta tecnológica :
  
  Componentes de calefacción hechos de cristal con control de temperatura incorporado. Los dispositivos son ópticamente transparentes para la inspección superior e inferior de los elementos calentados. Particularmente conveniente durante procesos tales como el cultivo de células, las pruebas y la síntesis de APIs, instalaciones en las que los periféricos puedan obstaculizar la inspección.
  
  El calor es transferido por un electrodo ITO, modelada con calidad fotolitográfico en la parte posterior de la hoja de vidrio, evitando arañazos o daños durante la operación
  
  Hay disponibles tapas personalizadas y extraíbles, ofreciendo conexiones a múltiples fuentes, tales como fluidos, neumáticos, ópticos y eléctricos, para la alimentación / alimentación de los elementos colocados en el calentador. Esta tapa reduce la complejidad de las configuraciones, también facilita su funcionamiento, permite organizar el espacio en diferentes experimentos / áreas de procesamiento y la disponibilidad para el reemplazo fácil de elementos colocados en el calentador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  These heaters surpass the capabilities of traditional metal hot plates with respect to inspection possibilities, making them especially suited for applications in bio, chemical or pharma, where process monitoring is critical.
  
  The removable lid optimizes the arrangement of the heater's space for each experiment or process. The multiple source connections allow uncomplicated integration of the heated elements with the peripherals of the setup
  
  The heating area can be patterned to the desired shape and made to include differentiated heating zones, providing a further degree of freedom for choosing the desired experiment/process configuration. Leer más
O-1200University of Burgos / España 864

Solicitar información>> Compartir tecnología>>
Red en tiempo real de teleobservación para vigilar la calidad del medio ambiente en los acuíferos

groundwater, Water, aquifers, hydrology, water well fields, wetlands, environmental, irrigation
- Descripción de la oferta tecnológica :
  
  Esta tecnología permite el monitoreo de la calidad del agua en tiempo real en los acuíferos. Es especialmente útil para el agua subterránea que fluye en áreas naturales de difícil acceso. Varios parámetros de calidad del agua tales como parámetros físicos y químicos (por ejemplo, temperatura, conductividad, pH, calcio, sodio, potasio, magnesio, bicarbonato, carbonato, sulfato, cloruro, nitrato, amonio, fosfato, hierro, manganeso, fluoruro, ...). Estos datos medidos periódicamente se almacenan y se envían a un dispositivo a distancia en la oficina del gerente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The control and monitoring of water samples in aquifers located in natural areas of difficult access is easier and cheaper than other conventional techniques. Waters are regularly taken from the same sampling sites and analysed. Standardised methods are used so that the results are comparable. Accumulated data is stored, analysed and reported. In addition to traditional sampling, other methods such as remote sensing can be used. Leer más
O-987Chemical Transducers Group - GTQ IMB-CBN (CSIC) / España 1085

Solicitar información>> Compartir tecnología>>
Lengua electrónica para el control de calidad en alimentos, bebidas y farmacéuticas

Electronic tongue, food quality control, food quality, food safety, organoleptic analysis, Bakery, snacks, Dairy
- Descripción de la oferta tecnológica :
  
  El control de calidad de los productos en las industrias de alimentos, bebidas y farmacéutica exige el seguimiento de todas las fases de los procesos productivos. La GTQ ha desarrollado un sistema de sensores múltiples para el control - en línea y en tiempo real - de la composición y calidad de los productos de acuerdo a los estándares de calidad establecidos (patrones) en todas las fases de producción: materias primas, subproductos y productos finales.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Control of chemical composition and quality standards throughout the production process: raw materials, by-products and final products.
  
  - Control of chemical composition.
  - Control of quality standards.
  - Customizable (chemical parameters and quality standards).
  - Applicable to raw materials, by-products and final products.
  - Organoleptic Analysis of final product.
  - In situ measurements.
  - Continuous measurements Leer más
O-944Universidad Carlos III de Madrid / España 1223

Solicitar información>> Compartir tecnología>>
Nuevo sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos.

Remote sensors, measures, instrumentation, multisensor, sensors, Control Systems, Traffic Engineering
- Descripción de la oferta tecnológica :
  
  Dos universidades españolas en una colaboración conjunta han desarrollado un sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos, que proporciona el número, el tipo y la velocidad de los vehículos en una carretera. El sistema no es invasivo, ofrece bajo costo, bajo consumo de energía y de fácil instalación, con aplicaciones como la gestión eficaz del tráfico y análisis ambiental.
  Las universidades buscan empresas o entidades públicas para licenciar esta tecnología.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Due to its portability, low power and autonomy, installation and operation are simple and need neither disrupt traffic nor require specialized personnel.
  - There are not moving parts, which minimizes damages and wear.
  - It detects and considers the vehicles change lanes
  - Immunization to temperature changes, wind and interference from other sensors
  - Modularity and low cost allow to monitor several lanes
  - Classification of vehicles according to their height and shape Leer más
O-600The Science Park of the of the UC3M / España 1475

Solicitar información>> Compartir tecnología>>
Sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos.

Traffic Engineering, control systems Sensors, multisensor technology, Urban plannification
- Descripción de la oferta tecnológica :
  
  Dos universidades españolas en una colaboración conjunta han desarrollado un sistema para la caracterización del tráfico por carretera basado en sensores de ultrasonidos, lo que proporciona el número, tipo y velocidad de los vehículos en una carretera. El sistema no es intrusivo, es de bajo coste, bajo consumo de energía y de fácil instalación, con aplicaciones tales como la gestión eficaz del tráfico y análisis del medio ambiente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The proposed traffic characterization system (SCT) classifies and measures the number of vehicles driving on a road and their speed. The information provided by this system allows a simple and inexpensive traffic characterization that flows through a road of one or more lanes, which can be useful in the traffic analysis to ensure efficient management or the environmental impact generated by the analyzed road, because output data provided by the system are closely related to air and noise pollution associated with road traffic.
  
  The design is ready to be mounted over a bridge, an overpass or in any elevated platform over the road. In this way, the system can be installed and uninstalled easily without stopping the traffic.
  
  The system is ready to characterize multi-lane roads and it consists of several modules, each of them performs detection using an ultrasonic sensor. The characterization of each lane needs to use two modules. On the other hand, the joint characterization of all lanes allows taking into account vehicles that are changing between lanes just at the time of measurements by the sensors, so it avoids false or incorrect readings.
  
  Each measurement module consists of a sensor (transmitter/receiver), a battery and electronics according to the selected data acquisition mode. Moreover, it is also possible to supply power through an external source.
  
  Since the system is designed to characterize traffic, including fast roads, the processing software takes into account the specific difficulties of such roads. For example, the classification of vehicles is not made from their profiles, but it is used the maximum height detected for each vehicle and the statistical spread from the categories previously recorded. However, its main advantage is the calculation of the speed of vehicles.
  
  Innovative aspects:
  
  • Due to its portability, low power and autonomy, installation and operation are simple and need neither disrupt traffic nor require specialized personnel.
  • There are not moving parts, which minimizes damages and wear.
  • It detects and considers the vehicles change lanes
  • Immunization to temperature changes, wind and interference from other sensors
  • Modularity and low cost allow to monitor several lanes
  • Classification of vehicles according to their height and shape Leer más
O-1020Atlanta Marketing Consultants / Estados Unidos 1208

Solicitar información>> Compartir tecnología>>
Hybrid Fuel Cell System With Smart Power Electronic Technology

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy
- Descripción de la oferta tecnológica :
  
  The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Key Advantages of GEI-X5 Power Solution include:
  
  • Independent of the hydrogen infrastructure and do not require pure hydrogen for electric power production (able to operate on any carbon based fuel including biogas)
  • Use locally available carbon based infrastructure fuels employing a fuel reforming system that is 50% smaller than traditional fuel reforming systems with a 30% increase in power density (kW/liter).
  • Results in a 40%+ reduction in fuel consumption with the GEI-X5 HTPEM vs. diesel electric generators
  • Reduces harmful CO2 greenhouse gas emissions by 80% as compared to diesel electric generators
  • Provides silent power generation and multi-fuel diversity (critical for military applications).
  • Leverages a Common Technological Infrastructure (CTI) allowing adaptable and reconfigurable electric power output across multiple application domainareas with a common fuel cell stack infrastructure.
  • Incorporates a proprietary bi-polar plate flow field design which increases power density for use with reformed fuels
  • Hybrid fuel cell system containing a lithium battery allowing for more efficiency than straight fuel cell systems
  • Scalable system enabling for a wide range of renewable energy applications
  • Compatibility and ability to enhance the performance of other power technologies such as solar, wind, etc...
  • One button start
  
  CUSTOMER PROBLEM (Prior To GEI)
  
  Fuel cells are a highly efficient, combustion-less, and virtually pollution free energy source which provide electricity to power a wide array of applications including buildings, electric grids, trucks and automobiles, emergency back-up systems, laptop computers, and numerous other consumer devices. In principle, a fuel cell is an electrochemical device that operates like a battery. However, unlike a battery, a fuel cell requires re-fueling, and not recharging. A fuel cell uses fuel — usually hydrogen extracted from natural gas, propane, or other carbon based fuels, and oxygen extracted from air — to produce electricity. Fuel cells will continue to produce energy in the form of electricity and heat as long as there is a constant fuel source. Hydrogen fuel cells work simply, have no moving parts, and operate silently with water and excess heat as the only by-products.
  
  GEI High Temperature PEM (HTPEM) fuel cells operate at 160-180C. The HTPEM higher operating temperatures allow the use of non-pure hydrogen as a fuel while maintaining the cost and expanding the application flexibility benefits of low temperature PEM fuel cells.
  
  The specific benefits include:
  
  1) More efficient use of thermal energy or by-product heat used in a combined heat and power application resulting in high system efficiencies;
  
  2) Reduction of balance-of-plant (BOP) components for cooling, water management and purification resulting in reduced maintenance and simpler operations and controls;
  
  3) When using reformed fuels rather than pure hydrogen, the result is increased tolerance to carbon monoxide (by a factor of 300) which can poison LTPEM systems. The ability to use non-pure hydrogen reduces the equipment and capital cost necessary to remove fuel impurities.
  
  The resulting triad of benefits listed above result in a simpler yet compact and robust design which requires no humidification with high fuel flexibility and lower cost, yielding significant competitive advantages for commercial HTPEM fuel cell power systems. When HTPEM's are integrated with fuel reforming technologies, the combined heat and power fuel processing system is very efficient, with a high power/weight ratio, and represents the optimum technology for on-board reforming of military JP8 diesel,synthetic fuels, and locally available infrastructure fuels. The GEI HTPEM power generation and fuel reforming technology represents the optimum balance between the cost and availability of low temperature PEM fuel cells, and the high temperature fuel impurity tolerance of much higher temperature (800C+) fuel cells.
  
  The result is a game changing power technology which out-performs solar, wind, geothermal, hydro-electric, coal, and other power solutions from a cost and an efficiency standpoint while also being able to enhance the performance of these power solutions.
  The GEI Hybrid fuel cell system(Combining a lithium battery and fuel cell) is also equipped with state of the art electronics (making it a smart system which is able to communicate real time for monitoring and adjustment purposes). Leer más
O-1102University of Alicante / España 1539

Solicitar información>> Compartir tecnología>>
Nuevo proceso para la síntesis estereoselectiva de compuestos acetilénicos utilizados como aditivos en baños galvánicos

Organic compounds, electrolysis, electrochemical, electrochemical synthesis, electrocatalysis, electrochemistry, galvanic, galvanic baths, acetylenic compounds, organic chemistry, Oxidation, nickel, electroplating, metal industry, Automotive
- Descripción de la oferta tecnológica :
  
  El grupo de investigación de Electroquímica aplicada y electrocatálisis de la Universidad de Alicante ha desarrollado un proceso estereoselectivo para la síntesis electroquímica de 3 - (2-propynoxy)-2-propenoico y / o mezclas de compuestos acetilénicos (el mismo ácido y alcohol propargílico) a través de un paso. Esta síntesis no utiliza permanganato como agente oxidante, evita las condiciones extremas de reacción y minimiza la gestión de los residuos. El grupo electroquímico busca empresas interesadas en adquirir esta tecnología con fines comerciales o para el establecimiento de proyectos para adaptar esta tecnología a sus necesidades.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Regarding the existing state of the technique, the electrochemical processes have characteristics which make them very adequate to be applied for the synthesis of organic compounds with industrial application. Here, oxidation processes occurs upon electrodes named anodes where the substance which must be oxidized loses its electrons on the anode without needing conventional oxidising agents. Therefore, contaminants derived from the use of conventional oxidising agents are not generated and hence, no need for the management of hazardous residues is applicable.
  
  On the other hand, the electrochemical processes are developed under soft conditions (atmospheric pressure and room temperature) and clearly facilitate further processes of separation of one of the compounds of the reaction mixture.
  Leer más
O-1029AMIC, Environmental and Industrial Applications of Catalysis / España 852

Solicitar información>> Compartir tecnología>>
Hidrohal, deshalogenación (hidrodeclorinación catalítica selectiva)

dehalogenation, catalytic hidrodechlorination, decontamination of effluents, clean technology, catalytic technology, chemicals, petrochemicals, fine chemicals, chemical engineer
- Descripción de la oferta tecnológica :
  
  Innovadora tecnología apropiada para la descontaminación de efluentes con compuestos halógenos orgánicos.
  La reacción catalítica, hidrodecloración selectiva, consiste en la reacción de compuestos orgánicos halogenados con hidrógeno en un reactor catalítico. Es una tecnología limpia que utiliza hidrógeno como reactivo y no se generan residuos.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The catalytic technology allows you to break up the organic compound from the halogen, obtaining the hidrur HX, which has a lower toxicity than the halogenated organic compound.
  The chemical formula of the catalyst designed by the researchers of the Rovira i Virgili University, is the key of the process. Leer más
O-964Knowledge Innovation Market / España 741

Solicitar información>> Compartir tecnología>>
Las nuevas tecnologías de señalización para la seguridad del tráfico

signaling technologies, Signaling technology, traffic safety, traffic control, traffic lights, traffic, brackets, poles, LED
- Descripción de la oferta tecnológica :
  
  Chasis del semáforo, incluyendo soportes y bastones. (las diferentes piezas pueden ser comercializadas por separado). Conjunto modular de fácil acoplamiento con sistema anti-rotación, permitiendo así la creación de diferentes combinaciones disponibles. Producto de calidad a un precio muy competitivo, a raíz de la evolución del mercado y que incluyen sistemas muy innovadores para su durabilidad y mantenimiento.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Easy lamp removal system with its new diffuser system.
  - Quick pressure clamping of hood with 9 and 4 anchor points allowing its rotation at intervals of 30 º.
  - High degree of electrical insulation thanks to its own dielectric characteristics.
  - New designs more ecofriendly and ensuring its durability against environmental and weather conditions. Leer más
O-1068Laser Consult Ltd / Hungr 708

Solicitar información>> Compartir tecnología>>
Filtros de salida de gases que utilizan la tecnología de espuma de revestimiento

foam coating filters, combustion gas, combustion, exhaust gas, air pollution, foam coating, power station, filters
- Descripción de la oferta tecnológica :
  
  Nuestro socio, una empresa coreana ha desarrollado una nueva tecnología de filtro de medios. El cliente está buscando socios comerciales para un Acuerdo Comercial y ulterior desarrollo común.
  En el entorno industrial, el polvo que causa la contaminación del aire se emite durante el proceso de combustión. Comúnmente se utiliza un sistema de filtración de profundidad para filtrar el polvo. Nuestra tecnología difiere de las aplicaciones actuales, ya que utiliza el sistema de superficie de filtración. Por lo tanto, este filtro de recubrimiento de espuma es excelente para la eliminación de polvo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The Korean company has developed a foam coating filter. Its pore size is under 30㎛ and filters the dust which is produced from combustion process. It provides cost effective operation by saving more than 40% of existing operational maintenance. The main advantage of this technology is the small pore size and it offers low price compared other foam coating filter products. Leer más
O-1245Sensors, Romote Sensing and Infrared Image Laboratory / España 118

Solicitar información>> Compartir tecnología>>
Dilucidación de parámetros termodinámicos

polymers, thermography, thermodynamic, thermodynamics, Thermal material testing, Thermal insulation
- Descripción de la oferta tecnológica :
  
  INFRARROJO LAB y el Laboratorio de Sensores espectral (LIR / LSE) de la Universidad Carlos III de Madrid han desarrollado técnicas de elucidación de los parámetros termodinámicos.
  
  El conocimiento de las propiedades termodinámicas de un material y su aplicación a los modelos de transferencia de calor clásica, permite la predicción del comportamiento de los materiales en cualquier medio ambiente y contra cualquier estímulo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  New materials are revolting important sectors such aeronautics and construction, whose ramifications reach many other areas.
  
  Knowledge of the thermal parameters is a key aspect in the development and improvement of these new materials. INFRARED LAB-LIR has IR thermography techniques for the empirical determination of thermodynamic parameters and capability to create validation models due the laboratory infrastructure (which includes excitation systems and image in the infrared and modeling software). Leer más
O-1185CELEROMICS TECHNOLOGIES, SRL / España 1002

Solicitar información>> Compartir tecnología>>
Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology
- Descripción de la oferta tecnológica :
  
  Contador de células automatizado para microscopios. Nuestro sistema se conecta a cualquier microscopio de laboratorio y es capaz de medir la densidad celular o confluencia en cámaras de recuento, placas de Petri, placas de pocillos, etc No es desechable ni requiere mantenimiento, no hay necesidad de matar a las células para llevar a cabo su recuento, reducción de la manipulación de células y se elimina la contaminación de células.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our systems plug to any laboratory microscope.
  
  It is able to count from 1 to 1000 microns in particles analyzed with a single device.
  No need for disposable material or reagents : savings 500-2000 EUR /year.
  It is able to count inside the bioreactor : no need to open the container / sacrifize the culture to perform the count. Leer más
O-1034Grupo de Transductores Químicos - GTQ IMB-CNM (CSIC) / España 636

Solicitar información>> Compartir tecnología>>
Nuevo dispositivo eléctrico y reutilizable de lectura de (bio) microarrays

microarray platforms, DNA, Proteins, Antibodies, peptides, carbohydrates, cells, tissue, Genomics, proteomics, drug discovery, clinical diagnostics, POC Applications, archaeology, medicine, veterinary
- Descripción de la oferta tecnológica :
  
  Plataformas de microarrays con diferentes componentes biológicos (por ejemplo, ADN, proteínas, anticuerpos, péptidos, carbohidratos, células o tejidos) están siendo desarrolladas y comercializadas como herramientas analíticas poderosas y de alto rendimiento con la aplicación de la genómica, la proteómica, descubrimiento de fármacos o diagnósticos clínicos. El CSIC ha patentado un lector de microarrays eléctrico y reutilizable que permite trabajar con el estándar de sustratos de bajo coste de los sistemas tradicionales de lectura fluorescente pero con un equipo mucho más compacto y rentable.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  An alternative to optical readout devices and new POC Applications
  
  Unlike other electric readout systems, this reader can be cleaned manually or automatically and be reused an unlimited number of times.
  
  Compact, economic and reusable
  Electrical readout
  Device cost (Very Low)
  Substract cost (Very Low) Leer más

1 2 3

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

3rd Annual Alliance Management for Open Innovation in Pharma

Strategic alliances for pharma innovation

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en temperature : Oportunidades ... | Ofertas

Innovación en temperature : Oportunidades ... | Ofertas

plate heat exchanger, Food, food technology, food technologist, Dairy

Food, technology, cooking, grilling, control, Happcc, meat, fish, steack, perfect, cook, grill

Molecular thermometer, temperature sensors, sensors, temperature

ceramic, Construction, buildings, noise barrier, sound barrier, acoustic system, sound-absorving, Weather, seismic, earthquake, wall, block, brick, insulating materials

El producto es un sistema de construcción de cerámica, que actúa como material aislante al ruido y la temperatura. Se ha diseñado para que sea limpio y más eficaz en sus propiedades, sus costes y tiempos respecto otros productos aislantes.

Titania, Titanium dioxide, nanoparticles, magnetic, ferrite, micelle, photocatalytic; germicidal

Smart shower, shower, showers, bath, Bathroom, water efficiency, Water, spa, wellness, hotels, Legionella

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics

gas analysis, gas mixture, Gas mixtures, gas storage, gas drillingg, gas, oil drilling, environmental, energy, catalysis, air filters, air purification, air, recycling, chemicals

• This system is thermostated and temperature can be adjusted to the desired experimental conditions. • It is possible to implement in the volumetric device other suitable elements to determine density (e.g., elements based on measurement of resonant frequency, and so on). Leer más

Nanorods, dendritic, magnetic nanostructures, nanoparticle, Nanostructures, Nanowires, nanotubes, nanomanufacturing, electrochemistry, chemical vapor deposition, supercapacitors, chemical, Chemistry

CO2, reuse of industrial waste, SO2, acid rain, greenhouse gasses, detergents, calcite

Smart cities, vehicle, traffic

fat surgery, beauty, losing weight, body fat, medical devices, plastic surgery, lipo aspiration, liposuction

color, pigment, nano, dye, paint, organic, inorganic, Hybrid

proteoliposomes, proteoliposome, virus, viruses, Gene therapy, recombinant adenovirus, cancer, genes, gene delivery, gene expression, viral vectors, DNA, Biotechnology

low tech desalination, small scale, ejector, solar termal, desalination

chemical synthesis, microfluidics, cell culture, hot plates, heaters, API synthesis

groundwater, Water, aquifers, hydrology, water well fields, wetlands, environmental, irrigation

Electronic tongue, food quality control, food quality, food safety, organoleptic analysis, Bakery, snacks, Dairy

Remote sensors, measures, instrumentation, multisensor, sensors, Control Systems, Traffic Engineering

Traffic Engineering, control systems Sensors, multisensor technology, Urban plannification

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy

The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.

Organic compounds, electrolysis, electrochemical, electrochemical synthesis, electrocatalysis, electrochemistry, galvanic, galvanic baths, acetylenic compounds, organic chemistry, Oxidation, nickel, electroplating, metal industry, Automotive

dehalogenation, catalytic hidrodechlorination, decontamination of effluents, clean technology, catalytic technology, chemicals, petrochemicals, fine chemicals, chemical engineer

signaling technologies, Signaling technology, traffic safety, traffic control, traffic lights, traffic, brackets, poles, LED

foam coating filters, combustion gas, combustion, exhaust gas, air pollution, foam coating, power station, filters

polymers, thermography, thermodynamic, thermodynamics, Thermal material testing, Thermal insulation

Microbiology, biology, laboratory, microscopy, microscope, microscopes, cell counter, molecular biology, genetics, counting chambers, petri dishes, well plates, Cell, Biotechnology

microarray platforms, DNA, Proteins, Antibodies, peptides, carbohydrates, cells, tissue, Genomics, proteomics, drug discovery, clinical diagnostics, POC Applications, archaeology, medicine, veterinary

Usuario nuevo (registro gratuito)

Usuario registrado

• This system is thermostated and temperature can be adjusted to the desired experimental conditions.
• It is possible to implement in the volumetric device other suitable elements to determine density (e.g., elements based on measurement of resonant frequency, and so on).
Leer más