Innovación en generic product : Oportunidades...

1 2 3 4

D-564empresa anónima / España 1912

Envía tu propuesta>> Compartir demanda>>
Buscando una propuesta de desarrollo para un producto farmacéutico de liberación sostenida en cápsulas de gelatina dura de un medicamento de alta potencia.

wet granulation, sustained release, generic product, high potency drug, hard gelatin capsule, multidose pharmaceutical product, scale up process, GMP, ICH, FDA, EMEA
- Resultado deseado
  
  El objetivo es desarrollar un genérico de alta potencia, multidosis bioequivalente y estable, en el marco de tiempo acordado entre las dos empresas a partir de los hitos que establezcamos. El producto debe ser escalado a nivel industrial con la siguientes tecnologías: mezcla directa, granulación húmeda (agua u orgánicos), secado en lecho fluido, ... La compañía que ofrece la propuesta debe ser capaz de generar la documentación necesaria para registrar el producto en los mercados europeos y FDA. Las soluciones presentadas deberán contener una propuesta de enfoque de desarrollo innovador para un medicamento genérico con detallados puntos de decisión (go - no go) basados en "Risk Assessment Study". Un desarrollo conjunto podría ser considerado.
  
  28/06/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Solutions presented should contain an innovative approach development proposal for a generic product with a detailed go - no go decision points, using design of experiment as a tool based on a Risk Assesment Study. Presently we develop our projects following normally the same patern: from t=0 - api disponibility, to proof of concept, it takes about 6 months. We choose the best concept using in vitro dissolution profiles technology, and pre-stability testing. At this point we scale up the product to pilot batches and carry out the designed Bioequivalent study. We are looking for a different approach to developing a pharmaceutical product based on the attainment of consecutive milestones and bearing in mind its time to market and costs involved. Leer más
D-145empresa anónima / Reino Unido 2021

Envía tu propuesta>> Compartir demanda>>
Novel low carbon combustible heat source for consumer product

exothermic, carbonacious, pyrotechnics, ceramics, heat-source
- Resultado deseado
  
  We are searching for a novel combustible heat source for use in conjunction with a consumer product. The heat source must be small, lightweight and should preferably be ignited by a naked flame or other incandescent material, although alternative methods would be considered. The heat source should reach a temperature of 350 degrees C within 10 seconds and maintain the temperature for 6-15 minutes. Full technical requirements of the heat source are listed below in the full description.
  
  18/06/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are searching for a novel combustible heat source for use in conjunction with a consumer product which should include all or most of the following characteristics:-
  
  Technical Requirements
  
  • Should reach a minimum of 350˚C within 10 seconds and maintain the temperature for 6-15 minutes
  • Preferred material has less than 80% carbon/charcoal
  • Non-toxic emissions on combustion
  • Small and lightweight with volume less than 1.5cc
  • Should allow airflow through / around product (gas permeable, fluted design etc)
  • Allow high volume manufacture from low cost materials
  • Must “light” and then smoulder whilst not sustaining a permanent flame
  • Should provide gross heat output in excess of 10kj/g
  • Robust and non-friable in production / storage / processing
  
  Potential Solutions
  
  Although the solution will preferably be ignited by a naked flame or other incandescent material, alternative methods will be considered. Possible solutions could come from various sectors including, but not limited to:-
  
   Exothermic chemistry applications
   Fuses / pyrotechnics
   Manufacturing processes
   Hand-warmers / heat pads / medical appliances / pain relief systems
   Ceramics (e.g. coals / logs for gas fires)
   Matches
   Defence industry e.g. incendiary devices
  
  Our client is a £multi-billion company manufacturing and supplying a range of consumer products, from sites around the world. With a strong emphasis on new product development and extensive R&D facilities, they are well-placed to further develop promising technologies in order to commercialise these on a global basis.
  
  Products, systems or technologies with IP protection are preferable, but not essential. An option for exclusivity for a given application, however, is strongly preferred. We are willing to explore any reasonable commercial arrangements including supplier agreements, licensing, strategic alliances or other form of partnering arrangements.
  Leer más
D-718empresa anónima / Reino Unido 2104

Envía tu propuesta>> Compartir demanda>>
Buscamos un socio multidisciplinar de desarrollo de producto para la gestión del ciclo completo de innovación de productos de consumo

product development, prototyping, consumer device, FMGC, marketing comercial
- Resultado deseado
  
  We are working with a global blue chip company aiming to develop and manufacture a new category defining rechargeable, electromechanical handheld consumer device, utilising cartridge-type consumables. The client company has completed extensive internal research and has developed a working prototype to prove the concept and various component technologies. They are now actively searching for a multi-disciplinary partner to assist in ongoing development of the product and the move into volume manufacturing, for onward distribution.
  
  07/01/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos trabajando con una compañía mundial de chips azules con el objetivo de desarrollar y fabricar una nueva categoría de cartuchos con un dispositivo recargable, electromecánicos y de mano. El cliente ha terminado la investigación interna y ha desarrollado un prototipo para probar el concepto y las diversas tecnologías. Ahora están buscando activamente un socio multidisciplinar para ayudar en el desarrollo continuo del producto y el movimiento en el volumen de fabricación, para su posterior distribución. Leer más
D-3empresa anónima / España 1471

Envía tu propuesta>> Compartir demanda>>
Plastic particles detection system in agro-food product manufacturing

Food, Teflon, Metallic detector, food safety, Plastic
- Resultado deseado
  
  The current challenge’s aim is to develop trustful detection system of plastic particles accidentally generated as the friction result between the plastic surface material (teflon or similar) and the mechanical parts of the production line.
  
  27/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The use of Teflon surfaces is common in the product agro-food manufacturing. The most relevant characteristics offer: high impact absortion capacity, high temperature resistance (200C), good slip properties and prevents food adhesion above all for those which its texture and consistency is sticky. Teflon’s substitution for other metallic materials (mainly stainless steel) has not worked since the food sticks easily provoking incidents in the production line.
  
  In the other hand, due to friction between the plastic surfaces and the mechanical parts of the line, plastic particles are formed which if incorporated in the food generate a risk for the consumer.
  
  When the surface is of metallic origin (Iron, stainless steel), the post of a metallic detector at the end of the line prevents that the contaminated product reaches the consumer. Nevertheless, when the generated particle is of plastic origin the current systems (metallic detectors, X.Ray) do not work.
  
  The objective of the challenge is to find suitable technological solutions that would let to identify plastic fragments (Teflon or similar) that accidentally have been incorporated in the food. The solution may be thought in different levels: some of the possibilities are:
  
  1- To incorporate metallic charge to the plastic polymer (Teflon or similar), so in case of incorporation in the food it will be detected by a conventional metallic detector.
  
  2- Alternative technology that could detect plastic materials in the food product
  
  Tests performed with X-ray technology have not worked, this option is not accepted
  
  Success criteria of winning proposals are:
  
  - Minimal particle size that should detectable: 1mmx3mmm
  
  - The proposed solution must work in a the production line with a production of 1200 units per minute.
  Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-528GS AUTO INTERNATIONAL LTD / India 1652

Envía tu propuesta>> Compartir demanda>>
Buscamos proyectos/propuestas innovadoras con aplicacion en la industria de la automoción y el transporte

licensing, Automotive, product, technology, transportation, disruptive, vehicle, metals, materials,
- Resultado deseado
  
  Las propuestas deben tener aplicación en la industria de la automoción y del transporte. Tienen que ser respetuosas con el medio ambiente y probadas. Puesto que será un producto OEM, el potencial de aplicación debe ser en automóviles, camiones ligeros, autobuses, ferrocarriles, etc.
  
  22/05/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The product and technology can have wider application in other industries also. The areas can be suspension systems, brake systems, Cast iron, aluminum or other materials with unique properties. As the trend in the automotive industry is towards light weighting so as to be fuel efficient, so the product has to meet that criteria also. The process technology has to be environment friendly as well as energy efficient. Since it will be an OEM product, the application potential should be in cars. light trucks, SUV, medium to heavy duty truck, buses, railways etc.
  
  The licensing partner should be already supplier to the leading Europeon, American or Japanese vehicle manufacturers whether as Tier 1 or Tier 2. Exclusivity of license is also desired
  
  Leer más
D-9empresa anónima / España 1082

Envía tu propuesta>> Compartir demanda>>
Composition of filtrating lands and cellulose for the food industry

Pearlites, land, cellulose, kiersergurs, co adjuvant product
- Resultado deseado
  
  The objective of the present challenge is to find a partner to co-develop a filtration coadjuvand product based on a mix of Pearlite, kieselgurs and cellulose fibre. Turn over: 500.000euros, 250.000 tons/year, with a expected grow of 1 million euros. Final benefit. 3% (based on agreement)
  
  30/09/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our company of chemical specialities needs to develop a filtration coadjuvand product based on a mix of Pearlites, kieselgurs and cellulose fibre.
  
  The product has to have a controlled permeability ( it will be specified) and good properties of retention of fine particles from food liquid products through filter´s types of : candela, disks or plates.
  
  For the development of the Project we think in a technical expert or in a company with the infrastructure to produce mixes of lands with cellulose fibre with high grade of precision and mix uniformity Leer más
D-673empresa anónima / Reino Unido 1760

Envía tu propuesta>> Compartir demanda>>
Buscamos "long-lasting freshness technology" para productos de limpieza de superficies duras

hard surface, cleaning, Freshness, Perfume delivery, Detergency, Pro-perfume
- Resultado deseado
  
  Los productos de limpieza de superficies duras actuales generalmente dependen de la tecnología convencional de perfumeria para proporcionar aroma a las superficies que se limpian, y para liberarlo al medio ambiente. Incluso cuando están formulados para ser altamente persistentes, los perfumes convencionales rara vez alcanzan un efecto que dura más de un par de horas. Creemos que los consumidores valorarían que los productos de limpieza de superficies duras pudieran ofrecer innovadores beneficios de longevidad del perfume, por ejemplo, una duración de al menos medio día.
  
  Los productos de limpieza de superficies duras actuales típicamente contienen niveles bajos de surfactante, y este agente tensioactivo es necesario para mantener el perfume disuelto. Las necesidades principales que deben ser abordadas son: (i) asegurar una correcta liberación del perfume a la superficie a limpiar y (ii) controlar la liberación de estos perfumes en el "headspace" después de que la superficie se haya secado, a través de (iii) una tecnología que sea estable y compatible con una formulación diluida del producto de limpieza
  
  22/01/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Important requirements for the technology solution:
  
  1. Does not introduce cleaning or shine deficiencies which may negatively affect the consumer acceptance of a hard surface cleaner.
  
  2. Affordable cost and/or is highly weight efficient, due to the low consumer price of these products which results in relatively low formula cost.
  
  3. Clear perfume longevity benefits: 24h freshness even in stress conditions (venting, malodours)
  
  4. Strong performance robustness to different formulations with varying surfactant system designs/levels
  
  5. Be formulatable in dilute hard surface cleaners with good stability and no impact on phase stability Leer más
D-430empresa anónima / España 2220

Envía tu propuesta>> Compartir demanda>>
Buscamos sustancias para indicar el final de la vida de un producto

ink, end of life, time, cellulose, solvent sensitive
- Resultado deseado
  
  Estamos buscando un indicador de fin de vida (como, por ejemplo, una tinta sensible al solvente) para su uso en una celulosa. El objetivo es indicar la vida útil del producto. El producto es una celulosa impregnada de solvente orgánico y termina su vida útil cuando todo el líquido se ha evaporado del sustrato
  
  06/02/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The technology could be, for example, an ink that has different refraction index when is wet (meaning transparent appearance) or dry (white solid color), so the aspect of the product will change indicating the end of life of it. We're open to get other technologies that could achieve the objective. Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-5empresa anónima / España 978

Envía tu propuesta>> Compartir demanda>>
Organoleptic improvement of an hemoglobin hydrolizate

prepared meats, protein concentrates, swine hemoglobin, globin peptones, enzymatic hydrolysis.
- Resultado deseado
  
  Our company wishes to receive proposals in order to improve the flavour of a product based of globine peptones obtained throught enzimatic hydrolisis of swine hemoglobin.
  
  30/09/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our R&D department has developed a product based on globin peptones after enzymatic hydrolysis , throught unspecific proteases, of swine hemoglobin and the latter elimination of the hemo group. The resulted product (globin peptones) is presented as granulated powder dryed throught atomization. The potential market of the product is the protein benefit in the elaboration of prepared meat (cooked ham, bologna, thin pasta, paté, etc)
  
  The product is presented as a granulated powder of cream colour with high protein content (70-80% protein), salts (around 15-17%) and low humidity (4-5%). The product has strong bitter taste and extra flavour that makes its inclusion in higher levels in meat products impossible (0,2-0,3%).
  
  The aim of the challenge is to find viable industrial alternatives that could significally reduce the organoleptic problem of the current hydrolizate, by doing so we could have a product with neutral flavour. To input us with technical solutions for the outcome of an enzymatic hydrolizate with similar physical-chemical properties of the our current product but with neutral flavour that could made possible its use in meat products as protein concentrate. The levels of inclusion should be 20-30g/kg without the modification of the additional product flavours.
  
  The current enzymatic hydrolizate is obtained from enzymatic hydrolisys with serine type endoproteases of bacterial origin (Bacillus licheniformis) that hydrolyze swine hemoglobin non-specifically. After Hydrolisis , with a hydrolysis grade of 15-20%, a product is obtained and its hemo group extracted by filtration, the resulting product is based on globin peptones with an average weight lower than 1000 Daltons and with the following physical-chemical characteristics.
  
  1. Levels of proteins (aminograme)
  The value of the different aminoacids are being expressed in %
  
  Free amino acids: 10,63 +/- 0,67
  
  Aspartic Ac. 9,77 +/- 0,97
  Glutamic Ac . 6,13 +/- 0,40
  Serine 3,89 +/- 0,31
  Glycine 4,29 +/- 0,37
  Hystidine 5,50 +/- 0,21
  Threonine 2,68 +/- 0,19
  Alanine 7,40 +/- 0,57
  Arginine 2,67 +/- 0,30
  Thyrosine 2,03 +/- 0,20
  Valine 5,81 +/- 0,45
  Methionine 1,18 +/- 0,07
  Phenylalanine 5,65 +/- 0,56
  Isoleucine 0,43 +/- 0,03
  Leucine 9,63 +/- 0,60
  Lysine 3,34 +/- 1,26
  Hydroxyproline <0,10
  Proline 2,73 +/- 0,26
  Cysteine 0,25 +/- 0,02
  Trytophan 1,46 +/- 0,17
  
  2.- Colour: cream
  3.- Humidity : 4-5%
  4.- Solubility: The product should be full soluble in water
  
  To conclude, we are looking gor proposals to develop a product that keeps the Physical and chemical properties mentioned but that has a neutral taste that allows its use in several meat products at the levels of inclusion of 0.2-0.3% without affecting its organoleptic properties.
  Leer más
D-771empresa anónima / España 1148

Envía tu propuesta>> Compartir demanda>>
Se buscan nuevos ingredientes naturales como filtros UV para productos cosméticos

UV filters, ultraviolet filters, UV absorbers, cosmetic, cosmetics, sun care formulation, dermatology, skin, cream, lotion
- Resultado deseado
  
  We are seeking for UV absorbers from natural origin. Our main intention is to reduce the use of chemical filters with the aim of reducing the toxicity that cause the use of this kind of products. It's important that they could be formulated in a cosmetic product
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos en busca de absorbentes de UV de origen natural. Nuestra intención principal es reducir el uso de filtros químicos con el objetivo de reducir la toxicidad que causa el uso de este tipo de productos. Es importante que se pueda formular en un producto cosmético Leer más
D-773empresa anónima / España 1107

Envía tu propuesta>> Compartir demanda>>
Buscando un yogur de lactosa reducida, pasteurizado después de la fermentación

lactose-reduced yogurt, pasteurized yogurt, yogurt, yogourt, lactose-free, lactose-reduced whole milk, custard, dairy products
- Resultado deseado
  
  Seeking a producer of lactose-reduced yogurt, pasteurized after fermentation. We are looking for a pasteurized / UHT yogurt, which guarantees a long shelf life for the product: minimum 9 months, prefereably 12 months.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Se busca un productor de yogur de lactosa reducida pasteurizado después de la fermentación. Estamos buscando un yogur pasteurizado / UHT, lo que garantiza una larga vida útil del producto: mínimo 9 meses, preferiblemente 12 meses. Leer más
D-585T.E. Laboratories / Irlanda 1302

Envía tu propuesta>> Compartir demanda>>
Buscamos un método o producto para detectar colorante marcador amarillo y azul en combustibles

Marker dye, fuel markers, laundered fuel
- Resultado deseado
  
  Estamos tratando de proporcionar un método fiable para detectar marcadores de colorantes amarillos y azules en "laundered fuel". El método o producto solicitado será un método de ensayo seco o un procedimiento analítico que demuestre concluyentemente la presencia o ausencia de color amarillo y azul en el combustible analizado. Este kit debe ser no líquido.
  
  11/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Currently we supply domestic and international Revenue Commissioners with a solution made from liquid and we are looking for a dry test kit or an analytical procedure. This would simplify the testing procedure, be less hazardous, more user-friendly and easier to produce. Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-628empresa anónima / Estados Unidos 1514

Envía tu propuesta>> Compartir demanda>>
Buscamos "Hygroscopic Packaging Technology"

Hygroscopic, filter, packaging, film, Food
- Resultado deseado
  
  Las soluciones deben tener un potencial para aplicaciones directas en alimentos, incluso si ese no era su intención original o el propósito. Debe tener potencial para pasar aprobación de la FDA / y adaptarse a la legislación de seguridad alimentaria de EE.UU. Las soluciones pueden ser aplicaciones en fase de desarrollo o comerciales
  
  28/08/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Technology Brief: Hygroscopic packaging material technologies
  
  Pre packaged consumer goods tend to involve high percentages of water in the product mix, which creates inefficiencies in the supply chain due to the weight of the product and the shipping and fuel costs associated. If product - packages can utilize the moisture in the surrounding environment or upon customer activation, then the supply chain benefits and sustainability benefits are significant.
  
  I am seeking packaging technologies that enable the use of hygroscopic packaging materials to pull moisture from the environment or a direct water source to infiltrate the package, mix with the product contents and essentially hydrate the product.
  
  Solutions should allow for flexible or rigid primary packaging, filtering of microbes from water/moisture source, and metering of the moisture absorption to control a maximum limit.
  Leer más
D-652empresa anónima / Reino Unido 1170

Envía tu propuesta>> Compartir demanda>>
Buscando un "pre-metered dose gel dispenser / applicator" para un producto de 2 componentes que mezcle los componentes a demanda del usuario

innovative dispenser, pre-metered dose gel dispenser
- Resultado deseado
  
  Estamos trabajando con un fabricante de productos químicos que está buscando tecnologías innovadoras de dosificación / aplicación para un producto de 2 componentes. Específicamente, se requiere un mecanismo de dispensación que mezcla los componentes a demanda (para permitir la activación), y suministra una pequeña cantidad, precisa de producto mezclado homogéneo para la aplicación sobre un área pequeña. Actualmente utilizan un "mini plastic (PP) dual syringe". Sin embargo, esto es engorroso, impreciso y requiere mucho tiempo para que el usuario lo utilice.
  
  27/09/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The client is therefore looking for a pre-metered dose gel dispenser/applicator, which should provide most (if not all), of the following properties:-
  
  - Ability to hold 2 separate components until mixed for dispensing
  - Mix 2 components in 1:1 ratio (ideally mixing should be integral, not separate attachment)
  - Allow use of highly viscous and different compounds (e.g. 100k cPs and 1.5 M cPs)
  - Compact dispenser for small volumes (total combined volume 1 - 5 cc)
  - Easy control of dosage – ideally should dispense accurate doses of 0.001 – 0.05 cc to provide ‘droplets’ with radius of 1-2mm
  - Reusable, allowing multiple doses to be dispensed (but not refillable)
  - Dispenser material should be inert to corrosive or oxidizing contents (pH range 2.0 – 13.0)
  - Air-tight and prevent liquid leakage (avoid mess and prevent product wastage)
  - Allow mixing / dispensing of gels, pastes and ‘lumpy’ or irregular liquids
  - Quick to use – i.e. minimal steps for preparing / using the dispenser
  - Low unit cost for high volumes
  
  Solutions could be found in the DIY, healthcare, craft/model building, electronic and surgical industries, where adhesives, sealants and other specialist compounds are dispensed by professionals / consumers.
  
  Our client is actively searching for innovative dispensing and applicator solutions for their product, and has a preference for solutions that are already available on the market, or require minimal development for their application. However, they will consider innovative technologies that require further development but provide a step-change in function for this and other applications. All solutions should have a minimum of proven technical feasibility for an application and demonstrate of ease of use. Potential for IP protection for specific applications would be advantageous. Leer más
D-421empresa anónima / Reino Unido 2360

Envía tu propuesta>> Compartir demanda>>
Buscamos packagings disruptivos para aumentar las ventas y ofrecer "food on the go" que es rápido de preparar, cocinar y comer

novel packaging, microwave cooking, added value packaging, portable food
- Resultado deseado
  
  El estilo de vida moderno ha provocado un aumentado del consumo de alimentos "en marcha" y los consumidores prefieren productos que son fáciles de transportar, preparar y consumir. Por lo tanto, nuestro cliente está interesado en agregar valor a los envases de sus productos y está dispuesto a aprender sobre nuevos materiales de envasado innovadores adecuados para diferentes procesos de cocción y calentamiento. Innovaciones relacionadas con envases de un solo uso, sostenibles siempre que sea posible
  
  31/03/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are working with a large European food products company, specialising in innovative ingredients to ‘help you cook’ – their range of ambient products includes:-
  
  - ‘Wet’ food (soups, broths, vegetable sauces and ready meals)
  - ‘Dry’ foods and seasoning ingredients (dried soups, stock cubes, seasoning powders)
  These products assist consumers to prepare tasty and nutritious meals that have a natural and traditional ‘home-cooked’ flavour. Whilst these flavours are important to the consumer, the client recognises the consumer’s desire for improvement in both the functionality and sensorial profile of the products.
  
  They are aware that busy modern lifestyles have increased the consumption of food “on the go” and consumers prefer products that are easy to carry, to prepare and to consume. Therefore, they are interested in adding value to the packaging of their products and hence are keen to learn of new innovative packaging materials suitable for different cooking / heating processes.
  
  Packaging innovations should be for single-use by the consumer, be sustainable wherever possible, and provide functionality to make the final product a ‘must-buy’ product.
  
  Different types of packaging innovations that could be of interest for wet / dry products are:
  
  • Materials that enable microwave cooking, but provide the effect of grill / oven / frying (e.g. for pizzas, meat, etc) - the material could be a part of the product packaging or an added element contained in the packaging that eases the process of cooking
  
  • Rigid or semi-rigid containers (tray, cup, bowl, jar etc.) or flexible pouches which would help in cooking, especially in the microwave
  
  • Packaging which adds new functionality for increased consumer convenience – e.g. increased portability, assembled packaging with different compartments for easy mixing / preparation, non-burn materials, etc
  
  • Packaging that removes need for utensils or measuring device – e.g. incorporating dosing measurements for amount of water to add
  
  • Single use cooking devices such as plastic bags or new innovative container concepts to cook the meal directly and in a more efficient manner – e.g. to provide a cleaner, quick, tastier way to cook
  
  Of special interest is adding value to the ‘dry’ food packaging part of the client’s business:-
  
  • Sachets to easily mix a dry product with water and cook
  • Novel ideas which permit the conversion of a sachet into a convenient container for eating
  
  The client company is already working with some established partners, but is keen to explore solutions from all avenues, from academic research through to company R&D. Therefore, they are willing to consider all types of collaboration, including supplier relationships, licensing, joint product development, etc.
  Leer más
D-736empresa anónima / Italia 1972

Envía tu propuesta>> Compartir demanda>>
Buscando un producto/proceso/formulación innovador que permita la producción de grasas sólidas, semi-sólidas y líquidas sin aceite de palmera o coco en la formulación

fat/s, fat technology, Bakery, palm oil, coconut oil, saturated fatty acids, fat based fillings, spreadable creams, dry breads, food technology
- Resultado deseado
  
  In order to improve the nutritional profile of our product portfolio we would like to reduce the content of saturated fatty acids. To do so, we are looking for substitutes of palm and coconut oils to be used for the production of fat based fillings (i.e. spreadable creams) as well as for the production of dry breads (i.e. crackers, breadsticks, crispbread etc.).
  
  05/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Con el fin de mejorar el perfil nutricional de nuestro portafolio de productos nos gustaría reducir el contenido de ácidos grasos saturados. Para ello, se están buscando sustitutos de aceites de palmera y de coco para ser utilizados para la producción de grasa (es decir, rellenos a base de cremas para untar), así como para la producción de panes secos (galletas, palitos de pan, pan crujiente, etc.) Leer más

Buscador de innovación destacado PANRICO SLU

Sobre PANRICO SLU

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-12empresa anónima / España 1130

Envía tu propuesta>> Compartir demanda>>
Valorisation of Self-adhesive waste product for being used as raw material for construction industry

Partition walls, valorisation, self-adhesive waste, environmental solutions, construction industry
- Resultado deseado
  
  Self adhesive waste products are usually a "clean" waste material that might be used as raw material for other industries. We want to receive proposals about valorisation of self-adhesive waste products for being used as a raw material to produce partition walls for the construction industry.
  
  31/01/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The object of this challenge is to receive proposals about valorisation of self-adhesive waste products, particularly papers (roles), plastic, coated on adhesive and/or silicone. We are looking for the way to transform this kind of waste products into raw materials for being used to produce partition walls for the construction industry. This process must be done by using technological means respectful with environment. Proposals should include following information:
  
  1.- Needed preliminary treatments of the self-adhesive waste products before converting them into a raw material for partition walls.
  
  2.- Design of an efficient process capable to do the transformation from waste products into partition walls. At the end of the process an 80 % of the waste has to be transformed,
  
  In attached documents please find some pictures of partition walls built from similar waste products.
  
  It is a composed formed by a piled up of materials; roles and plastics properly crushed with the possibility to incorporate adhesive remainders and/or silicone as hardening agents properly stabilized to conform a type of plastic wood utilized for the paved of surfaces or like partitions of separation among other applications.
  
  Leer más
D-6empresa anónima / España 999

Envía tu propuesta>> Compartir demanda>>
Energy efficiency in centralized buildings: solar-housing-floor information flow.

Energy efficiency, energy management, photovoltaic, solar energy, buildings
- Resultado deseado
  
  Our informatics’ product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energy efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  15/08/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our informatics product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energetic efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  We have information of the three areas (temperature, flows, etc) and all the information that we need of the system and /or the environment, but this information is only collected and the three areas are maintained independently, flow within them does not exist.
  
  Our system telemanages 12 centralized buildings, with a remote control system in real time and with an alert intelligent system. Currently there is a single interaction within the three basic areas: the heating demand in the building (number of flats that are demanding heating simultaneously) is used to have a more reliable control of the boiler, this allows saving energy (reducing the potency of the boiler) when the demand is low.
  
  We believe that the yield of the building can be improved if the three areas work and interact together: Could the solar panel information be useful for the production plant? We therefore wish to receive proposals of experts in energy management that could provide us with the knowledge of how to use the information we have, how to modify the behaviour (the control) of an area taking into account the acquired values in other areas, etc… in order to improve the yield of the building.
  
  The success of the received proposals will be evaluated comparing the yield with or without the interaction between areas.
  Leer más
D-572empresa anónima / España 1462

Envía tu propuesta>> Compartir demanda>>
Buscamos nuevas estrategias para demostrar la funcionalidad de los compuestos derivados del olivar .

nutraceuticals, functional foods, EFSA, olive, oil
- Resultado deseado
  
  Gran empresa agroalimentaria que comercializa aceites de origen vegetal de calidad. La compañía iene como objetivo para los próximos años expandir su cartera de productos a la línea de productos alimenticios de acuerdo a nuevas tendencias de consumo, más sanos, más selectivos y productos de valor añadido. Nuestro objetivo es encontrar nuevas aplicaciones de compuestos de valor técnicamente viables para productos agroalimentarios.
  
  El propósito de esta petición es encontrar un socio con la capacidad, conocimientos y experiencia para diseñar nuevos productos alimenticios de carácter saludable a partir de compuestos derivados del olivar. La funcionalidad del prototipo debe ser dirigida a un tipo de consumidor determiando (infantil, ancianos, etc.). El desarrollo experimental por lo tanto, debe utilizarse para demostrar los efectos beneficiosos con el fin de ser validado por la EFSA y posteriormente usarlo como estrategia de venta.
  
  07/10/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  In search of new healthier food for consumers, we are concerned the use of certain products is becoming less healthy for turning in their intake.
  
  Future developments should prioritize the use of raw materials from olive or derivatives thereof, to the greatest extent possible. We want to develop an improved product that allows the food eaten in this medium are more digestible. The main commercial claim must be set to "aids digestion and assimilation of nutrients". We are looking for ways to support this claim with the aim of using as a selling point. Leer más
D-783empresa anónima / España 2089

Envía tu propuesta>> Compartir demanda>>
Buscando microencapsulación de biocidas con principios activos

Microencapsulation, encapsulation, microcapsule, Microcapsules, biocide active ingredients, biocide, biocides, agrochemicals, Insecticide, pest control
- Resultado deseado
  
  The solution must comprise:
  - the design of the microcapsule structure that breaks under the working conditions expected for this product
  - The preparation of samples with several potential capsule materials for internal testing (performance and stability)
  - Support for industrialization either by technology transfer for internal production or by microcapsule supply.
  
  14/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  La solución deberá comprender:
  - El diseño de la estructura de microcápsula que se rompe bajo las condiciones de trabajo esperado para este producto
  - La preparación de las muestras con varios materiales de las cápsulas potenciales para pruebas internas (rendimiento y estabilidad)
  - Apoyo a la industrialización ya sea mediante la transferencia de tecnología para la producción interna o por la oferta de microcápsulas. Leer más

Buscador de innovación destacado COPCISA

Sobre COPCISA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-761Kvfd / Dinamarca 1122

Envía tu propuesta>> Compartir demanda>>
Buscando aerosol en cera que se seque en menos de 30 segundos

spray on wax, wax, surf, surfer
- Resultado deseado
  
  A spray on wax product that needs to dry in less than 30 seconds after it has been sprayed on the surface. The product needs to be non-toxic - preferable no chemicals, must be easy to spray on, must be able to be used in normal temperature (10 - 30 degrees Celsius) and must last at least 2 hours. It should be able to be sprayed out from a tin thereby creating a layer of wax on the surface sprayed on.
  
  03/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Un aerosol en el producto de cera que se seque en menos de 30 segundos después de que haya sido pulverizado sobre la superficie. El producto tiene que ser no tóxicos - productos químicos no preferibles, debe ser fácil de pulverizar, debe ser capaz de ser utilizado en la temperatura normal (10 - 30 grados Celsius) y debe durar al menos 2 horas. Debe ser capaz de ser pulverizado fuera de una lata creando de ese modo una capa de cera sobre la superficie rociada. Leer más
D-457empresa anónima / España 2002

Envía tu propuesta>> Compartir demanda>>
Buscamos fijador de color de tejidos para incorporar a un detergente para la ropa

chemistry-surfactants-additives
- Resultado deseado
  
  Un ingrediente para añadir en un detergente que ayuda al cuidado de los colores de un tejido mediante la fijación de los pigmentos, evitando la perdida de color durante el proceso de lavado. También busca la misma finalidad para un producto "pre-spotter". Considere la composición de los tensioactivos aniónicos y no iónicos
  
  12/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Also looking the same finality for a pre-spotter product. Consider the composition contains anionic and non-ionic surfactants Leer más
D-580empresa anónima / España 2354

Envía tu propuesta>> Compartir demanda>>
Buscamos la microencapsulación de bacterias probióticas para aumentar la estabilidad de las bacterias en matrices alimentarias líquidas conservadas a temperatura ambiente

probiotics, Microencapsulation, viability of bacteria, liquid food product, Functional Food
- Resultado deseado
  
  La solución presentada debe:
  
  - Permitir que las bacterias microencapsuladas sobrevivan en la matriz líquida conservada a temperatura ambiente (15 - 25 ° C) durante no menos de 4 meses, con una pérdida de un orden de magnitud máxima de supervivencia
  - Estar en fase final, ya desarrollado y probada su efectividad en cepas de Lactobacillus o Bifidobacterium.
  - Estar listo para ser objeto de licencia o compra.
  - Ser adecuada para el consumo humano y animal.
  - Ser fácilmente escalable a producción industrial y que no tenga una impacto en el coste final del producto de más del 10%.
  - Obtener partículas de un tamaño inferior a 100microm de forma que no sea fácilmente detectable por el consumidor.
  
  04/10/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Lactic acid bacteria in liquid food products and room temperature are metabolically active. This activity causes alteration of the food by metabolization of its nutrients modifying composition, stability and organoleptic properties. Moreover, lyophilization is a very well established method for the long-term storage of bacteria. The metabolic activity of the lyophilized bacteria is practically null but extremely sensitive to the presence of water and oxygen. Because of that the incorporation of probiotic bacteria to liquid food or food with high water activity conserved at room termperature is still a challenge for functional food industry.
  
  Presented solution would allow to produce particles of microencapsulated bacteria which would protect them from contact with water and oxygen, allowing its use into high activity of water or liquid food matrices. Particles must be of a size below 100microm so that it is not easily detectable by the consumer.
  
  Several methods of microencapsulation of probiotic bacteria have been reported and include spray drying, extrusion, emulsion and phase separation. None of these reported methods however, has resulted in the large numbers of shelfstable, viable probiotic bacterial cells necessary for use in industry for development of new probiotic products. Between the process of encapsulation and the time of preservation of probiotic bacteria in the liquid matrix loss of viability must not exceed an order of magnitude. The demand requires an already finished solution rather than a development process, ready to be licensed and implemented. Leer más
D-439empresa anónima / España 3271

Envía tu propuesta>> Compartir demanda>>
En busca de tecnología para desarrollar productos derivados del azúcar a partir de residuos lignocelulósicos

cellulosic fermentation enzyme, lignocellulosic waste, sugar, ethanol, food-grade, fruit waste, vegetable waste, refining sugars
- Resultado deseado
  
  To obtain a process from which we can obtain a high sugar product from fruit and vegetable transformation waste, mainly lignocellulosic waste, which can then be transformed to another products such as ethanol. Available sugars form the fruits and vegetable have already been taken off the biomass, so product has to be obtained from the break down of the polysaccharide chains which are present. Obtention of monosaccharides is desired. Product is intended to be food-grade, so solvents, chemiclas, etc, should be limited to food-grade products.
  
  12/02/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Proceso del cual podamos obtener un producto de azúcar a partir de residuos de transformación de frutas y vegetales, residuos lignocelulósicos, principalmente, que puede ser transformado a otros productos como el etanol. Los azúcares de las frutas y vegetales ya han sido separados de la biomasa, por lo que producto tiene que ser obtenido por la descomposición de las cadenas de polisacáridos que están presentes. Deseamos obtener los monosacáridos. El producto resultante debe ser de calidad alimentaria, por lo que los disolventes, productos químicos, etc, deben limitarse a los de calidad alimentaria. Leer más

Buscador de innovación destacado CORPORACIÓN ALIMENTARIA PEÑASANTA

Sobre CORPORACIÓN ALIMENTARIA PEÑASANTA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-816empresa anónima / España 475

Envía tu propuesta>> Compartir demanda>>
Buscando un algoritmo de optimización para la normalización del catálogo de productos y la agrupación de acuerdo a sus características.

artificial intelligence, algorithms, algorithm, C#, NET, software engineers, software engineering, enterprise software, Software, programming computer software, semantic matching, semantic software, open source
- Resultado deseado
  
  Given a big list of products with their characteristics, the algorithm should calculate the minimum clusters, grouping the product when possible and minimizing the cost of such clusters. Obviously, despite of the size of the problem, the algorithm should be able to find a solution in a sensible period of time. Each product will have a set of characteristics and it will be possible to merge it with other if both are compatible meeting a set of constraints. For each couple of products is necessary to analyze if they are compatible respecting the compatibility rules for each of their parameters and the cost of the merger. Every time two products are merged, the new one will be more restricted, so it implies to be more expensive to make (of course, the standardization will have other benefits, larger than the costs of the merger and out of the scope of the problem). The input of the algorithm would be: product 1, product 2, product 3, product 4… and the output: cluster1 (product1, product2, product3 with cost X) cluster 2 (product 4 with cost Y).
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Dada una gran lista de productos con sus características, el algoritmo debe calcular los grupos mínimos, agrupando el producto cuando sea posible y minimizar el costo de tales grupos. Obviamente, a pesar de la magnitud del problema, el algoritmo debe ser capaz de encontrar una solución en un período razonable de tiempo. Cada producto tiene un conjunto de características y se podrán combinar con otra si ambas son compatibles según un conjunto de restricciones. Para cada par de productos es necesario analizar si son compatibles respetando las reglas de compatibilidad para cada uno de sus parámetros y el coste de la fusión. Cada vez que dos productos se combinan, el nuevo será más restringido, por lo que implica a ser más caros de hacer (por supuesto, la normalización tiene otros beneficios, más grande que los costes de la fusión y fuera del alcance del problema). Leer más
D-650empresa anónima / Reino Unido 923

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías o procesos que permitan la rápida eliminación de "sacrificial ceramic support structure(s)" después de la cocción a mano de la cerámica

ceramic processing, ceramic cutting, finishing hard materials
- Resultado deseado
  
  Nuestro cliente está especializo en la fabricación de sanitarios y fregaderos / escurridores de cerámica hechos a mano. El proceso de fabricación consiste en verter arcilla refractaria fina en un molde, insertar piezas de moldeo para producir una forma compleja en 3D, seguido de varias etapas de secado, esmaltado, cocción y rrecorte. Este proceso de recorte consisite en eliminar una parte significativa de cerámica que se utiliza para equilibrar la carga térmica, minimizar la distorsión y proporcionar soporte estructural, mientras la pieza se cuece en un horno.
  
  Nuestro cliente está buscando activamente una tecnología, producto o proceso que permita la producción más rápida, segura y/o más barata de artículos de cerámica mientras manteniendo la misma calidad de acabados. Soluciones pueden venir investigadores, de empresas con conocimientos del proceso de fabricación de cerámica, de industrias de corte y acabado de materiales duros, o empresas con maquinaria de procesamiento o consumibles.
  
  26/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The client can use a combination of handheld cutting tool, CNC machine or robotic cutting tool and grinding mechanisms to finish the piece. Whilst the automated processes can be used, they require extensive initial capital outlay, can take more time to use for a varying selection of sizes and do not provide the same high quality, hand-finished product for which our client is known.The handheld tools allow a quicker changeover for products, but are labour intensive, involving health and safety risks and can be costly in terms of blade costs.
  
  Solutions could come from academia, companies with an understanding of ceramic forming/processing, industries cutting or finishing hard materials, or companies with processing machinery or consumables, and include:-
  
  - Innovative ways to support the piece in the kiln and balance the thermal loading (therefore negating the need for the ‘lost part’)
  - Innovative cutting technology for fired ceramics or other hard materials (e.g. ultrasonic, water-jet, laser, ‘hot-wire’ etc)
  - Step-change in blade technology for angle grinder
  - Sacrificial materials / moulding components to create void for easier ‘break-off’
  - Additives, meshes, fillers, etc that can react to stimulus and replace cutting of ceramic
  - 2-step moulding and glazing process to allow piece to be ‘built up’
  - Innovative joining technology for ceramics or materials that are moulded or fired
  - Innovative ceramic forming technology
  
  Preferred solutions should ideally be:
  
  - Low capital outlay cost
  - Small manufacturing footprint
  - Minimal emissions / effluent
  - Quick (matter of minutes or less)
  - Robust enough to survive prolonged high temperature firing cycle (1200°C for 12-24 hours)
  - Allow the expected shrinkage of ceramic during firing
  
  Our client is a European manufacturer of high-quality ceramic products, known for their excellent design and guaranteed performance. The company has significant expertise in design and manufacturing and is keen to locate innovative technology or products that will improve their existing production process.They are willing to consider all types of potential collaboration. Leer más
D-701empresa anónima / España 1352

Envía tu propuesta>> Compartir demanda>>
Buscamos solución antifúngica para productos de panadería basados en tratamientos físicos para llegar a una reducción de 4-log de las esporas de mohos en la superficie de los productos horneados

Bakery, Bread, moulds, preservatives, clean label, Natural Ingredients, E numbers, antifulgal, spores, sorbates, sorbic acid, potassium sorbate, sodium sorbate.
- Resultado deseado
  
  La solución tiene que cumplir los siguientes requisitos:
  
  Debe llegar a una reducción de 4-log de las esporas de mohos en la superficie del producto.
  No debería ser necesario un estrecho contacto entre la fuente del tratamiento y los productos horneados.
  No debe dejar residuos en el producto.
  No debe ser declarada en la etiqueta del producto en los países de Europa central y oriental.
  Debe poder trabajar en líneas de producción continuas con velocidades de 20 metros/minuto
  Debe tener un bajo riesgo operacional para las personas que deben manejarla.
  Debe tener piezas de repuesto de bajo coste o suministros.
  
  Empresa líder del mercado español "buns and pastry"
  
  12/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Bread and other bakery products are prone to rapid microbial spoilage, particularly mould
  growth, due to post-baking contamination during cooling, slicing/decorating and wrapping, which greatly limits its shelf life. The traditional way to solve this problem is adding preservatives in the dough or sprayed on the surface.
  
  The solution we are seeking has to be focused on a 4-log reduction in spores of moulds in the surface of the baked goods.
  
  There is growing an important trend in the market about using natural raw materials, not using any additive (clean label) and especially avoiding the use of preservatives. On the other hand supermarkets are asking for longer shelf life.
  
  For long shelf life products (>30 days) and traditional facilities (without Cleanrooms) are difficult to reach good results with natural preservatives. Some of these preservatives to be effective had the same chemical compounds than the E numbers, but obtained by a natural process. It’s easy to find the compound with a standard chemical analysis in the end-product. Leer más
D-186empresa anónima / Estados Unidos 1011

Envía tu propuesta>> Compartir demanda>>
Seeking: Cues that tell a consumer when home sanitizing is effective and complete

test, sensor, home sanitizing
- Resultado deseado
  
  People clean, but despite the assurances of cleaning product manufacturers, how do they know that the surfaces and other objects they have cleaned are in fact clean, or that they remain so? We're seeking a direct indicator or cue that the cleaning process is complete and effective.
  
  12/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  Germs that affect people -- bacteria, viruses, and spores -- migrate from place to place when people touch areas such as eyes, nose, and mouth and then touch other surfaces such as counters, doorknobs, handles, and keyboards. In fact, every surface touched by a finger is probably laden with invisible bacteria.
  
  There are many products effective against such organisms. They kill them. They capture them. They wash them away. In some cases, the products leave in place a residual effect that kills new germs that land there. The effectiveness of such products varies, but before-and-after tests can verify how well they work.
  
  However, there is no direct way for a consumer to know when a germicidal product has been effective or when it has completed its mission of killing germs.
  
  We're looking for convincing indicators or "cues" that tell a consumer when a home sanitizing process is effective and complete.
  
  Such a cue could be:
  
  o A color change or a change from opaque to clear.
  
  o Evaporation or sublimation.
  
  o An odor (or lack of an odor).
  
  o A change in feel or texture.
  
  o A thermal change.
  
  o A sensor substance that reacts to the presence or absence of bacteria.
  
  A cue that works in concert with another ingredient, or cue that tells a consumer that it is time to disinfect might also be an option.
  
  We want to incorporate such cues into our line of household and consumer products. An additional advantage to such a cue could be a quick consumer test to see whether a cleaned surface is "still clean" -- for example: pass a treated cloth over a surface and if there is no color change, the surface is still killing germs.
  
  Alarming the consumer is not our aim: we want to assure the consumer that the cleaning process is complete, effective, thorough, and residual.
  
  CONSTRAINTS
  
  o Your proposed solution should not increase the complexity of existing cleaning tasks, or require new tasks.
  
  o Applicable to a variety of surfaces and materials.
  
  o The cue must be believable, reliable, and accurate.
  
  POSSIBLE SOLUTION AREAS
  
  Microencapsulation
  
  Nano-crystals
  
  Fragrance release or odor elimination technology
  
  Test technologies that provide cues or changes in the presence of analytes.
  Leer más

Buscador de innovación destacado Orange R&D Spain

Sobre Orange R&D Spain

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-270empresa anónima / Reino Unido 1013

Envía tu propuesta>> Compartir demanda>>
Novel means to stabilise traditionally unstable actives such as hopcalite and manganese peroxide

Carbon Monoxide (CO), stabilisation of actives
- Resultado deseado
  
  We are looking for a novel means to stabilise in ambient atmosphere / temperatures traditionally unstable actives such as hopcalite and / or manganese peroxide, for use in Carbon Monoxide removal / adsorption. The technology will be used in a small, disposable consumer product requiring no power source.
  
  02/12/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Carbon monoxide (CO) is a highly poisonous, colourless and odourless gas produced as a result of incomplete burning of carbon-containing fuels in combustion processes, and can occur in a number of industrial and domestic settings including: chemical manufacturing processes; furnaces, kilns and foundries; exhaust gas of internal combustion engines, motor vehicles and fuel cell vehicles; domestic space and combustion heaters; and smoke.
  
  Our client is searching for an innovative technology to selectively remove / filter carbon monoxide (CO) from exhaust streams that has the ability to work in various complex systems, be stable until use, but compact enough to use in personal respirators / masks (e.g. for industry workers, scuba divers, fire-fighters, etc).
  
  Carbon monoxide is one of a number of combustion gases and therefore solutions to reduce this have to be able to work in the presence of a wide range of other gases and particulates – i.e. not a clean environment.
  
  Whilst there are a number of technologies that can remove carbon monoxide under certain conditions (such as adsorption and catalysis), there are a number of environmental factors that affect the performance. Potential solutions to address these factors could be found in new catalysts, processes to improve efficiency of existing catalysts, etc:-
  
  Materials / Processes Properties
  • Emission control catalysts
  • Adsorption
  • Oxidation catalysts to convert carbon monoxide to carbon dioxide
  • Metals and metal oxides such as gold, palladium, platinum, titania, alumina, ceria, zirconia, iron oxide, zinc oxide and magnesium oxide
  • Nanoparticle based catalysts
  • Process to encapsulate reactive particles
  • Encapsulated liquids with permeable shell / membrane
  • Increase stability of oxidising agents (i.e. Hopcalite – copper manganese oxide - in presence of water vapour
  • Chemical additives for membranes, etc • High selectivity towards CO
  • Stable during storage – active only in presence of CO
  • Maintain performance under high flow rate (fast kinetics) – 1 litre/min
  • Able to function at room temperature Non-toxic / no toxic by-products
  • Low cost
  • Ideally in granular form, but could be powder / liquid
  • Compact – either in film, membrane or paper format or dense foam / granules
  • Ability to work in complex environment (in the presence of other gases and particulates)
  
  Our client is a £multi-million company interested in advanced materials for the filtration / removal of harmful gases from exhaust streams. They are continually investing in product development and have appropriate R&D facilities to develop appropriate innovative technologies. Eventual products will have global markets and client is searching for innovative technology and processes, and will consider any reasonable commercial arrangements including licensing in, purchasing, strategic alliances and partnering arrangements.
  Leer más
D-265empresa anónima / Estados Unidos 1131

Envía tu propuesta>> Compartir demanda>>
Seeking 'greener' technologies to inhibit colors from attaching to polyquaternium on fibers/textiles

polyquar, fiber, ssma, fabric, colot
- Resultado deseado
  
  We are seeking technologies to neutralize, block or inhibit the reaction between polyquaternium compounds (PQs) and color 'bodies' in aqueous environments.
  
  23/01/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The effect has been noted at various conditions. The temperature of the water can be anywhere from 5'C to 95'C. The ration of textile to water is from 1:10 to 1:3. The pH of the water can be from 6 to 11. This is not to say these are limits as more extreme conditions may also exhibit the effect. PQs are known to provide benefits such as nice 'feel' at low cost in many personal care products however when the personal care product is directly applied to fibers and fabrics, they can cause staining. If any colors come into contact with the PQs in an aqueous environment, the PQs will effectively 'suck in' the color bodies. The color bodies can be from grass stains, inorganic particulate soils (clay) or even fugitive dyes from other fabrics. The adhering is most acute with cotton fibers, but solutions that prevent adhering on any fibers are of interest.
  The current blocking approach uses sulfonated styrene malaic anhydride (SSMA) in high concentration to inhibit color bodies from contacting and adhering to the PQ.
  
  Background
  We believe that the cationic substituents are a cause of the problem. Nonionic based detergents are most affected by this phenomenon while detergents with high anionic surfactant levels exhibit similar behavior, but to a much lesser degree; Note, however, that [PQ7], which is common in many hand soaps appears to be unaffected by surfactant type.. Neutralizing the polyquat positive charges seems to help in inhibiting the reaction.
  
  Possible Solutions:
  
  - Remove the poly quats from the fibers
  - Provide a cheaper alternative to SSMA to neutralize or block color bodies from contacting/adhering. This could be accomplished either by targeting the PQs directly, or by generically infusing the whole aqueous environment with the blocker/inhibitor (as is currently done)
  - Reduce the amount of SSMA required to effectively block the adhering (current concentrations for efficacy in a nonionic surfactant based detergent are 60 ppm to the aqueous system )
  - Target the stain directly (have to get there before the color gets there) OR generic solution (much higher concentrations required).
  
  Constraints:
  
  - Needs to be human-safe (GRAS)
  - Preferably biodegradable
  - Definitely needs to meet Design for the Environment (EPA) criteria
  
  Desired Outcome
  Cheaper, more sustainable method for preventing colors from adhering to PQs during washing of the underlying fibers/fabrics.
  
  Previously Attempted Solutions
  Using poly sulfonated styrene malaic anhydride (SSMA) – inhibits the color bodies from contacting and adhering to the PQ.
  Attemped to use polycarboxylates, acrylates and co-polymers. Solvents - mineral spirits, polar, non-polar, even chlorinated. None of these approaches worked.
  
  Leer más

1 2 3 4

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en generic product : Oportunidades... | Demandas

Innovación en generic product : Oportunidades... | Demandas

wet granulation, sustained release, generic product, high potency drug, hard gelatin capsule, multidose pharmaceutical product, scale up process, GMP, ICH, FDA, EMEA

exothermic, carbonacious, pyrotechnics, ceramics, heat-source

product development, prototyping, consumer device, FMGC, marketing comercial

Food, Teflon, Metallic detector, food safety, Plastic

The current challenge’s aim is to develop trustful detection system of plastic particles accidentally generated as the friction result between the plastic surface material (teflon or similar) and the mechanical parts of the production line.

licensing, Automotive, product, technology, transportation, disruptive, vehicle, metals, materials,

Las propuestas deben tener aplicación en la industria de la automoción y del transporte. Tienen que ser respetuosas con el medio ambiente y probadas. Puesto que será un producto OEM, el potencial de aplicación debe ser en automóviles, camiones ligeros, autobuses, ferrocarriles, etc.

Pearlites, land, cellulose, kiersergurs, co adjuvant product

The objective of the present challenge is to find a partner to co-develop a filtration coadjuvand product based on a mix of Pearlite, kieselgurs and cellulose fibre. Turn over: 500.000euros, 250.000 tons/year, with a expected grow of 1 million euros. Final benefit. 3% (based on agreement)

hard surface, cleaning, Freshness, Perfume delivery, Detergency, Pro-perfume

ink, end of life, time, cellulose, solvent sensitive

prepared meats, protein concentrates, swine hemoglobin, globin peptones, enzymatic hydrolysis.

Our company wishes to receive proposals in order to improve the flavour of a product based of globine peptones obtained throught enzimatic hydrolisis of swine hemoglobin.

UV filters, ultraviolet filters, UV absorbers, cosmetic, cosmetics, sun care formulation, dermatology, skin, cream, lotion

We are seeking for UV absorbers from natural origin. Our main intention is to reduce the use of chemical filters with the aim of reducing the toxicity that cause the use of this kind of products. It's important that they could be formulated in a cosmetic product

Estamos en busca de absorbentes de UV de origen natural. Nuestra intención principal es reducir el uso de filtros químicos con el objetivo de reducir la toxicidad que causa el uso de este tipo de productos. Es importante que se pueda formular en un producto cosmético Leer más

lactose-reduced yogurt, pasteurized yogurt, yogurt, yogourt, lactose-free, lactose-reduced whole milk, custard, dairy products

Seeking a producer of lactose-reduced yogurt, pasteurized after fermentation. We are looking for a pasteurized / UHT yogurt, which guarantees a long shelf life for the product: minimum 9 months, prefereably 12 months.

Se busca un productor de yogur de lactosa reducida pasteurizado después de la fermentación. Estamos buscando un yogur pasteurizado / UHT, lo que garantiza una larga vida útil del producto: mínimo 9 meses, preferiblemente 12 meses. Leer más

Marker dye, fuel markers, laundered fuel

Currently we supply domestic and international Revenue Commissioners with a solution made from liquid and we are looking for a dry test kit or an analytical procedure. This would simplify the testing procedure, be less hazardous, more user-friendly and easier to produce. Leer más

Hygroscopic, filter, packaging, film, Food

innovative dispenser, pre-metered dose gel dispenser

novel packaging, microwave cooking, added value packaging, portable food

fat/s, fat technology, Bakery, palm oil, coconut oil, saturated fatty acids, fat based fillings, spreadable creams, dry breads, food technology

Partition walls, valorisation, self-adhesive waste, environmental solutions, construction industry

Self adhesive waste products are usually a "clean" waste material that might be used as raw material for other industries. We want to receive proposals about valorisation of self-adhesive waste products for being used as a raw material to produce partition walls for the construction industry.

Energy efficiency, energy management, photovoltaic, solar energy, buildings

nutraceuticals, functional foods, EFSA, olive, oil

Microencapsulation, encapsulation, microcapsule, Microcapsules, biocide active ingredients, biocide, biocides, agrochemicals, Insecticide, pest control

spray on wax, wax, surf, surfer

Also looking the same finality for a pre-spotter product. Consider the composition contains anionic and non-ionic surfactants Leer más

probiotics, Microencapsulation, viability of bacteria, liquid food product, Functional Food

cellulosic fermentation enzyme, lignocellulosic waste, sugar, ethanol, food-grade, fruit waste, vegetable waste, refining sugars

artificial intelligence, algorithms, algorithm, C#, NET, software engineers, software engineering, enterprise software, Software, programming computer software, semantic matching, semantic software, open source

ceramic processing, ceramic cutting, finishing hard materials

Bakery, Bread, moulds, preservatives, clean label, Natural Ingredients, E numbers, antifulgal, spores, sorbates, sorbic acid, potassium sorbate, sodium sorbate.

test, sensor, home sanitizing

People clean, but despite the assurances of cleaning product manufacturers, how do they know that the surfaces and other objects they have cleaned are in fact clean, or that they remain so? We're seeking a direct indicator or cue that the cleaning process is complete and effective.

Carbon Monoxide (CO), stabilisation of actives

polyquar, fiber, ssma, fabric, colot

We are seeking technologies to neutralize, block or inhibit the reaction between polyquaternium compounds (PQs) and color 'bodies' in aqueous environments.

Usuario nuevo (registro gratuito)

Usuario registrado