Innovación en hard gelatin capsule : Oportuni...

D-564empresa anónima / España 1923

Envía tu propuesta>> Compartir demanda>>
Buscando una propuesta de desarrollo para un producto farmacéutico de liberación sostenida en cápsulas de gelatina dura de un medicamento de alta potencia.

wet granulation, sustained release, generic product, high potency drug, hard gelatin capsule, multidose pharmaceutical product, scale up process, GMP, ICH, FDA, EMEA
- Resultado deseado
  
  El objetivo es desarrollar un genérico de alta potencia, multidosis bioequivalente y estable, en el marco de tiempo acordado entre las dos empresas a partir de los hitos que establezcamos. El producto debe ser escalado a nivel industrial con la siguientes tecnologías: mezcla directa, granulación húmeda (agua u orgánicos), secado en lecho fluido, ... La compañía que ofrece la propuesta debe ser capaz de generar la documentación necesaria para registrar el producto en los mercados europeos y FDA. Las soluciones presentadas deberán contener una propuesta de enfoque de desarrollo innovador para un medicamento genérico con detallados puntos de decisión (go - no go) basados en "Risk Assessment Study". Un desarrollo conjunto podría ser considerado.
  
  28/06/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Solutions presented should contain an innovative approach development proposal for a generic product with a detailed go - no go decision points, using design of experiment as a tool based on a Risk Assesment Study. Presently we develop our projects following normally the same patern: from t=0 - api disponibility, to proof of concept, it takes about 6 months. We choose the best concept using in vitro dissolution profiles technology, and pre-stability testing. At this point we scale up the product to pilot batches and carry out the designed Bioequivalent study. We are looking for a different approach to developing a pharmaceutical product based on the attainment of consecutive milestones and bearing in mind its time to market and costs involved. Leer más
D-673empresa anónima / Reino Unido 1764

Envía tu propuesta>> Compartir demanda>>
Buscamos "long-lasting freshness technology" para productos de limpieza de superficies duras

hard surface, cleaning, Freshness, Perfume delivery, Detergency, Pro-perfume
- Resultado deseado
  
  Los productos de limpieza de superficies duras actuales generalmente dependen de la tecnología convencional de perfumeria para proporcionar aroma a las superficies que se limpian, y para liberarlo al medio ambiente. Incluso cuando están formulados para ser altamente persistentes, los perfumes convencionales rara vez alcanzan un efecto que dura más de un par de horas. Creemos que los consumidores valorarían que los productos de limpieza de superficies duras pudieran ofrecer innovadores beneficios de longevidad del perfume, por ejemplo, una duración de al menos medio día.
  
  Los productos de limpieza de superficies duras actuales típicamente contienen niveles bajos de surfactante, y este agente tensioactivo es necesario para mantener el perfume disuelto. Las necesidades principales que deben ser abordadas son: (i) asegurar una correcta liberación del perfume a la superficie a limpiar y (ii) controlar la liberación de estos perfumes en el "headspace" después de que la superficie se haya secado, a través de (iii) una tecnología que sea estable y compatible con una formulación diluida del producto de limpieza
  
  22/01/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Important requirements for the technology solution:
  
  1. Does not introduce cleaning or shine deficiencies which may negatively affect the consumer acceptance of a hard surface cleaner.
  
  2. Affordable cost and/or is highly weight efficient, due to the low consumer price of these products which results in relatively low formula cost.
  
  3. Clear perfume longevity benefits: 24h freshness even in stress conditions (venting, malodours)
  
  4. Strong performance robustness to different formulations with varying surfactant system designs/levels
  
  5. Be formulatable in dilute hard surface cleaners with good stability and no impact on phase stability Leer más
D-488SelChem India / India 1617

Envía tu propuesta>> Compartir demanda>>
Buscamos "UV curable hard coating" para lentes CR39

CR39, coating
- Resultado deseado
  
  El recubrimiento debe tener una buena adherencia, claridad y propiedades de resistencia a los arañazos. Debe pasar los tests de corte transversal y de lana de acero. El recubrimiento será sometido a los tests de agua hirviendo y de inmersión en agua salada. Debe superar todas estas pruebas.
  
  16/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our client is a reputed company in India manufacturing eyeglass lenses based on CR39 (allyl diglycol carbonate). On behalf of our client, we are looking for a UV curable hard coating which can be applied to CR 39 lenses by dip coating.
  
  Companies who can offer this kind of coating are requested to contact us with product details.We are preferably looking for a ready-to-use coating supplier. Technology transfer offers can also be considered. Leer más
D-254empresa anónima / Estados Unidos 1041

Envía tu propuesta>> Compartir demanda>>
Seeking: Anti-fouling and detritus-removal technologies for a variety of hard surfaces

Anti-fouling, detritus, removal, hard surface
- Resultado deseado
  
  We need components to make up one or more systems that can remove surface contamination (biofilms), lime scum, lime scale buildup, ameliorate water hardness, remove mold, mildew, and similar spores, handle soap scum, and remove surface detritus from a variety of materials.
  
  24/09/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are not currently looking for a "cleaning spray" (although that may form part of the solution), but rather for components that can contribute to a complete cleaning system that can work autonomously or semi-autonomously on a selection of surfaces, some horizontal, some vertical, some in complex shapes.
  
  BACKGROUND
  The materials we need to treat are both synthetic and natural. They include stone, fiberglass gel coat, plastic and other long-chain molecule materials, steel, concrete (sealed), glass, enamel, and china. Such materials occur in many industries, such as marine construction and maintenance, masonry, medical equipment, lapidary work, industrial plants, and a host of others.
  The materials vary in surface characteristics such as porosity, density, texture, flexibility/brittleness, and depth. Some materials adhere to substrates, some are consistent throughout, and some have surface finishes that must not be damaged (for example, gel coat).
  The process of cleaning such surfaces likewise varies by industry and may be known by several names: polishing, antifouling, anti-soiling, sterilization, anti-bacterial, and anti-mold/mildew are a few.
  We're looking to assemble complete systems - a system is a device and a consumable stream - that can clean, polish, scrub (or whatever) such materials, remove dirt and biofilm, and render them clean enough for use in a home. Ideally, we'd find a system in use in an industry such as marine hull maintenance (fiber glass hulls, for example) that we could adapt to our own industry. Or perhaps a stone mason uses a system for cleaning his natural surfaces before installing them in a home, and we could adapt his methods. Or a system used by hospitals to disinfect MRI tunnels might be what we need.
  
  We're open to your proposals.
  
  CONSTRAINTS
  o Environmentally friendly, safe for humans and pets, and output treatable by municipal systems
  o Does not damage surfaces
  o Automated or semi-automated operation
  
  POSSIBLE SOLUTION AREAS
  Various industries: medicine, stone, marine, construction, etc.
  Local products not currently on the world market
  Ultrasonic/aeration technologies
  
  Field Of Use and Intended Application
  Consumer applications
  
  Desired Outcome
  We hope to find a complete system that can remove dirt, detritus, biofilm, and similar contaminants from a variety of surfaces. Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-783empresa anónima / España 2095

Envía tu propuesta>> Compartir demanda>>
Buscando microencapsulación de biocidas con principios activos

Microencapsulation, encapsulation, microcapsule, Microcapsules, biocide active ingredients, biocide, biocides, agrochemicals, Insecticide, pest control
- Resultado deseado
  
  The solution must comprise:
  - the design of the microcapsule structure that breaks under the working conditions expected for this product
  - The preparation of samples with several potential capsule materials for internal testing (performance and stability)
  - Support for industrialization either by technology transfer for internal production or by microcapsule supply.
  
  14/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  La solución deberá comprender:
  - El diseño de la estructura de microcápsula que se rompe bajo las condiciones de trabajo esperado para este producto
  - La preparación de las muestras con varios materiales de las cápsulas potenciales para pruebas internas (rendimiento y estabilidad)
  - Apoyo a la industrialización ya sea mediante la transferencia de tecnología para la producción interna o por la oferta de microcápsulas. Leer más
D-650empresa anónima / Reino Unido 931

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías o procesos que permitan la rápida eliminación de "sacrificial ceramic support structure(s)" después de la cocción a mano de la cerámica

ceramic processing, ceramic cutting, finishing hard materials
- Resultado deseado
  
  Nuestro cliente está especializo en la fabricación de sanitarios y fregaderos / escurridores de cerámica hechos a mano. El proceso de fabricación consiste en verter arcilla refractaria fina en un molde, insertar piezas de moldeo para producir una forma compleja en 3D, seguido de varias etapas de secado, esmaltado, cocción y rrecorte. Este proceso de recorte consisite en eliminar una parte significativa de cerámica que se utiliza para equilibrar la carga térmica, minimizar la distorsión y proporcionar soporte estructural, mientras la pieza se cuece en un horno.
  
  Nuestro cliente está buscando activamente una tecnología, producto o proceso que permita la producción más rápida, segura y/o más barata de artículos de cerámica mientras manteniendo la misma calidad de acabados. Soluciones pueden venir investigadores, de empresas con conocimientos del proceso de fabricación de cerámica, de industrias de corte y acabado de materiales duros, o empresas con maquinaria de procesamiento o consumibles.
  
  26/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The client can use a combination of handheld cutting tool, CNC machine or robotic cutting tool and grinding mechanisms to finish the piece. Whilst the automated processes can be used, they require extensive initial capital outlay, can take more time to use for a varying selection of sizes and do not provide the same high quality, hand-finished product for which our client is known.The handheld tools allow a quicker changeover for products, but are labour intensive, involving health and safety risks and can be costly in terms of blade costs.
  
  Solutions could come from academia, companies with an understanding of ceramic forming/processing, industries cutting or finishing hard materials, or companies with processing machinery or consumables, and include:-
  
  - Innovative ways to support the piece in the kiln and balance the thermal loading (therefore negating the need for the ‘lost part’)
  - Innovative cutting technology for fired ceramics or other hard materials (e.g. ultrasonic, water-jet, laser, ‘hot-wire’ etc)
  - Step-change in blade technology for angle grinder
  - Sacrificial materials / moulding components to create void for easier ‘break-off’
  - Additives, meshes, fillers, etc that can react to stimulus and replace cutting of ceramic
  - 2-step moulding and glazing process to allow piece to be ‘built up’
  - Innovative joining technology for ceramics or materials that are moulded or fired
  - Innovative ceramic forming technology
  
  Preferred solutions should ideally be:
  
  - Low capital outlay cost
  - Small manufacturing footprint
  - Minimal emissions / effluent
  - Quick (matter of minutes or less)
  - Robust enough to survive prolonged high temperature firing cycle (1200°C for 12-24 hours)
  - Allow the expected shrinkage of ceramic during firing
  
  Our client is a European manufacturer of high-quality ceramic products, known for their excellent design and guaranteed performance. The company has significant expertise in design and manufacturing and is keen to locate innovative technology or products that will improve their existing production process.They are willing to consider all types of potential collaboration. Leer más
D-641empresa anónima / Brasil 1938

Envía tu propuesta>> Compartir demanda>>
Buscamos sustituto de STPP tripolifosfato de sodio

Phosphates free, detergents, cleaning, eco friendly, binders, hard water, Surfactants, sequestrants
- Resultado deseado
  
  Una compañía global está buscando sustitutos para los fosfatos que se utilizan actualmente en los detergentes domésticos para aumentar el rendimiento de limpieza y prevenir los efectos nocivos del agua dura.
  
  La solución debe proporcionar:
  
   La identidad de la solución tecnológica propuesta con especificaciones detalladas
   Los proveedores potenciales de los materiales y los costes indicativos si se conocen.
   Indicaciones de cualquier problemática relacionada con la formulación
   Disponibilidad de cantidades suficientes de muestras para el trabajo experimental.
   Capacidad de ser entregados en cantidades comerciales en enero de 2017.
  
  11/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Description:
  
  In Europe regulations restricting the use of phosphates and other phosphorus compounds in many consumer detergents are being adopted.
  
  The most widely used detergent phosphate is sodium tripolyphosphate (STPP), but various phosphates of sodium, potassium and other minerals are also used for specific applications. The reason why STPP is used in detergents is that it performs several very useful functions. Phosphates are able to soften water by deactivating water hardness minerals through sequestration (holding metal ions) or precipitation (removing metal ions from solution as insoluble materials). By binding the water hardening ions (Ca2+ and Mg2+) it prevents formation of filming and hard water deposits. An important functional property of phosphates is that they contribute to the overall detergency of a cleaner by providing and controlling alkalinity and preventing hard water interference with surfactants. Phosphates also exhibit a deflocculating property that helps to prevent formation of large particles of dirt which are easier to wash from the surface of substrates such as ceramics, glass and metal.
  
  Since phosphates fulfil a number of different functions; it may not necessarily be easy to replace them with a single ingredient formulated in the way STPP is currently used, however a single replacement solution for the problem would be preferred.
  
  Summary of Need /Scope of the Brief:
  
  To identify providers of alternative phosphate-free technology approaches for detergent applications that ideally have the potential for cost parity and performance parity with, for example, sodium tripolyphosphate.
  
  Providers are defined as:
  
  1. Universities with specific scale inhibition, or sequestering expertise,
  2. Startup and medium sized businesses
  
  Potential solutions from other industry sectors that can be adapted are also acceptable as are expert partners for collaborative work to design and synthesize custom chemistry that meet the criteria
  
  Detailed Technical Requirements:
  
  Provide alternative technology solutions to phosphate that may become cost parity and performance parity.
  
  The solution should provide:
  
   Identity of proposed technology solution with detailed specifications,
   Potential suppliers of materials and indicative costs if known.
   Indications of any formulation issues
   Availability of sufficient quantities of samples for experimental work.
   Should be able to be supplied at commercial quantities by January 2017.
  
  Magnetic, RF or electrochemical scale prevention devices are not in scope.
  
  Additional Information:
  
  1. Not be harmful for human use.
  2. Manufacturing process proposed should not be cost prohibitive
  3. Overall product cost appropriate for consumer use products
  4. Technology ideally to be REACH compliant
  5. Ideally offer scope for patent protection with the desired application and format if custom chemistry solution
  6. Have IP protection if a current product.
  7. Suitable for multiple formulation formats ( solids, powders, liquids, gels)
  Leer más
D-4empresa anónima / España 1146

Envía tu propuesta>> Compartir demanda>>
Pc embeeded linux Bluetooth emitter , to send and to interact with mobiles

Marketing bluetooth, linux, mobile, linksys, hardware
- Resultado deseado
  
  To assemble an electronic device that has a Linux operative system with some USB Bluetooth emitters and with a USB hard disk, all integrated in a case, all unified in one unity and with different USB ports ( to unify the hardware with several USB)
  
  15/09/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We need a hardware with the same characteristics as linksys (see added information) or to fit the configuration that we have but in an integrated manner in order to give a better image of the product that we are offering.
  
  The objective of the challenge is to assemble all the compounds in one, taking into account consume of electricity. Furthermore, the Network Storage link of Linksys has an internal memory of 8 Mb, it would be convenient to amplify to 1 Gb and eliminate the flash drive memory of Kingston.
  
  To give an integrated solution, unifying the compounds and designing a case, minimum of 2 USB external connexions in order to connect a modem or/ and a USB battery. 3 USB Bluetooth connexions should be possible to attach.
  
  If the solution is not based in linksys, we have to assure that the new device works without problem under Linux Debian 4.0.
  
  Background: We currently have 2 models full configured for us based in the microprocessors gumstick and in the current linksys and running with linux ( gumstix) and l linux debian etch. All the compounds work correctly, but since they are not assembled in a physical way they provoke confusion and they don’t give the feeling of a 100% ended product.
  
  Success criteria: we want to achieve an integrated hardware, whether keeping linksys as base or similar to the conventional and when the cost per unit is less than 100 Euros with accessories (electricity adaptor, hub USB, Bluetooth sticks...). For this, is necessary that the device has the relevant certificates in the case that uses integrated chipsets Bluetooth that meet with European community.
  
  Additional information:
  
  Linksys NSLU2, Network Storage link
  - Sumary.pdf
  - User Guide.pdf
  
  http://www.nslu2-linux.org/wiki/FAQ/HomePage
  
  Targus, Ultra Mini 4-Port USB 2.0 Hub
  - Specifications.pdf
  
  http://www.targus.com/us/product_details.asp?sku=PAUH217U
  
  We attach a drawing-scheme of all the compounds. BI-connexions.jpg
  
  Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-618empresa anónima / Brasil 1445

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías y enfoques para secar rápidamente varios objetos con diferentes formas, profundidades y superficies mojadas.

Drying Technology, Household Goods & Appliances, Water drying, evaporation
- Resultado deseado
  
  Una compañía global de bienes de consumo (FMCG), con oficinas en Brasil está buscando tecnologías y enfoques para secar rápidamente varios objetos con diferentes formas, profundidades y superficies mojadas. Esto debe llevarse a cabo a baja potencia (<0.5KW) y el menor coste. La compañía está buscando ingenieros de maquinaria innovadora que pueden estar en fase de desarrollo o que actualmente tienen otro uso, y están buscando la concesión de licencias o el desarrollo conjunto de contratos de investigación
  
  20/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  An international household cleaning products group with offices in Brazil is seeking technologies and approaches that enable the drying/removal of water form all facets of an irregular shaped hard surface. This is to be performed within an enclosed space to facilitate the rapid drying of items to provide at least 1 of the following benefits:
  
  • Faster drying
  • Low energy usage
  
  Technical Specifications / Specific technical requirements of the request
  Drying or removal of water from all sides of multi-faceted irregular shaped hard surfaced item contained within a sealed enclosed space in our particular application is particularly challenging due to the following:
  
  • The significant variety in the size, shape and surface complexity of the materials to be dried
  • The requirements to dry the entire surface in a very short time (minutes ideally)
  • The requirement to make a low cost, highly robust solution able to withstand daily use with little or no maintenance from the end user
  • The need to maintain a low total energy usage requirement (<0.5 kw)
  
  The solution should also meet the following requirements for incorporation into a consumer electrical product:
  
  1. Of sufficient robustness and simplicity to withstand daily use for > 3 years
  2. Able to work without significant maintenance or intervention required by the end user
  3. Not present a danger in use or hazard to the end consumer
  4. Ideally offer scope for patent protection with the desired application and format. Leer más
D-617empresa anónima / Brasil 1169

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías y enfoques que proporcionen alta energía/fuerza y cobertura de limpieza de múltiples objetos con diferentes formas, profundidades y superficies al mismo tiempo.

Cleaning Technology, Household Goods & Appliances, Washing, cleaning, Water, energy usage, Preasurized cleaning, Low cost
- Resultado deseado
  
  Una compañía global de bienes de consumo (FMCG), con oficinas en Brasil está buscando tecnologías y enfoques que dan alta energía / fuerza, y la cobertura de líquido limpiador, (y posterior eliminación de la suciedad) de varios objetos con diferentes formas, profundidades y superficies al mismo tiempo. Tiene que ser entregado a baja potencia (<0.5KW) y el menor coste. La empresa busca ingenieros de maquinarias innovadoras que pueden estar en fase de desarrollo o que actualmente tienen otro uso, para la concesión de licencias o el desarrollo conjunto de contratos de investigación
  
  20/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  An international household cleaning products group with offices in Brazil is seeking technologies and approaches that enable the coverage of all facets of an irregular shaped hard surface with liquid streams. This is to be performed within an enclosed space to facilitate the washing of soiled items to provide at least 1 of the following benefits:
  
  • Faster cleaning
  • Lower water consumption
  • Lower energy usage
  • Lower cleaning chemical consumption
  
  Technical Specifications / Specific technical requirements of the request
  High energy and/or pressure washing of all sides of multi-faceted irregular shaped hard surfaced item contained within a sealed enclosed space, in our particular application, is particularly challenging due to the following:
  
  • The significant variety in the size, shape and surface complexity of the materials to be washed
  • The requirements to cover the entire surface in a very short wash time (< 1 min)
  • The need to cover all surfaces of the item to be washed
  • The requirement to make a low cost, highly robust solution able to withstand daily use with little or no maintenance from the end user.
  • The requirement to perform liquid pressurization and distribution/coverage within tight instantaneous power consumption constraints (< 0.5kw).
  • The need to maintain a low total water usage requirement (use of a water reservoir of < 2L ideally).
  
  The solution should also meet the following requirements for incorporation into a consumer electrical product:
  
  1) Of sufficient robustness and simplicity to withstand daily use for > 3 years
  2) Able to work without significant maintenance or intervention required by the end user
  3) Not present a danger in use or hazard to the end consumer
  4) Ideally offer scope for patent protection with the desired application and format.
  Leer más
D-190empresa anónima / Estados Unidos 1017

Envía tu propuesta>> Compartir demanda>>
Seeking: Technologies for disinfecting soft surfaces, electronics, and other parts of the house

disinfecting, surface
- Resultado deseado
  
  We're looking for products and methods that clean and disinfect soft surfaces (curtains and couches), electronics, auto interiors, cell phones, doorknobs, and all the nooks and crannies in the house that are not cleaned routinely, and so can have the greatest impact on germ reduction and illness prevention.
  
  12/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  Many surfaces in the home are continually re-infected by casual touch and the germs we carry into the home with us. High-touch objects include furniture, remote-controls, and electronics that we may forget to disinfect or that are inherently difficult to disinfect.
  
  Adequate solutions exist for cleaning windows, countertops, sinks, brass, chrome, and similar hard-surfaces. (Although the process of cleaning those surfaces can be improved.) However, without special effort, a surprising number of surfaces in the home rarely get cleaned. For example: doorknobs, washers and dryers, vacuum cleaner handles, light switches, steering wheels, athletic equipment (at home and at the gym), cell phones, and virtually all soft surfaces such as curtains and teddy bears. Auto interiors may get a periodic vacuuming, but rarely a thorough cleaning.
  
  Many of these surfaces are difficult to reach or difficult to clean in-place. A homeowner may clean curtains or the couch only once in several years. There is no good conventional way to clean several types of objects, such as computers and stereos, because of their electronic nature.
  
  We're looking for cleaning methods, products, and devices that go beyond conventional hard-surface cleaning, and into the nooks-and-crannies, the un-cleanable soft surfaces, into the electronics, and that pursue the places we forget (such as doorknobs and athletic equipment).
  
  Ideally, your proposed solution
  
  o Must have data demonstrating efficacy.
  
  o Offers a convenient path to cleaning with minimal extra effort or new tasks.
  
  o Provides broad-spectrum anti-bacterial action, a rapid kill, and/or long residual effects.
  
  o Is a "consumable" (like a paper towel).
  
  CONSTRAINTS
  
  o Provably effective
  
  o Offers a believable cue that cleaning has been effective
  
  o Delights the consumer with its thoroughness
  
  o Effective on soft surfaces, electronics, and "nooks and crannies."
  
  POSSIBLE SOLUTION AREAS
  
  Misting or through-the-air delivery
  
  Automated cleaning devices
  
  Leer más
D-266empresa anónima / España 1352

Envía tu propuesta>> Compartir demanda>>
Seeking: special gauzes or fabrics for use in abdominal surgery that can be reabsorbed by the body

surgery, gauze, smart textiles, medicine, sutures
- Resultado deseado
  
  Seeking: commercial available gauzes or fabrics, materials, ... whose composition allows its reabsorption by the body. For years used products such as sutures, prosthetic surgery are absorbable. Once their function, they disappear from the body. The idea is that why not absorbable gauze could be used in abdominal surgery?.
  
  28/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  In the scientific literature is not hard to find scientific articles that describe the consequences of having been forgotten in the abdominal cavity (mainly) but also in other locations (brain, joints, spinal canal) gauzes after a surgical procedure. Nor is it difficult to find examples in the press of unfortunate cases, the media coverage against the surgeon and the Centre. This happens, despite having had even a count of the gauzes, presumably correct. For years used products such as sutures, prosthetic surgery are absorbable. Once their function, they disappear from the body. The idea is that why not absorbable gauze could be used in that surgery risk?
  
  POSSIBLE SOLUTIONS
  
  We direct our request to manufacturers of sutures and prostetic surgery or companies and research centers specializing in textiles that may be able to investigate fabrics that can be absorbed by the body. It would have to prove they are safe to the body.
  
  - Companies that manufacture or distribute products such as sutures or surgical prosthesis
  - Companies or research centers with open lines of research in the field of tissue reabsorbed
  
  CONSTRAINTS
  
  - The gauze / tissue has to be safe for the body
  - The gauze / tissue should be sterilized
  - Must be reabsorbed as quickly as possible
  - Size of the gauze: 10x10 cm
  
  Those solutions that are available in the market will take priority but are also welcome related solutions with new materials or polymers from which to manufacture this type of gauze reabsorbed
  
  Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-555empresa anónima / Reino Unido 1585

Envía tu propuesta>> Compartir demanda>>
Buscamos materiales o procesos que formen hojas/peliculas/tejidos en mallas con alta claridad óptica y baja turbidez

polymers, biopolymers, bio-nanocomposites, polymer fibers, polymer fiber-nanocomposites, wound dress
- Resultado deseado
  
  Materiales o procesos rentables que formen hojas/peliculas/tejidos con propiedades ópticas/difusión/térmicas deseadas
  
  Buscamos materiales o tecnologías eficaces que forman hojas/peliculas/tejidos en mallas con alta claridad óptica y baja turbidez. La difusión del agua en las hojas y una sensación general (suave, flexible, no dureza similar al plástico) de las hojas formadas son requisitos necesarios.
  
  21/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The sheet/film/fabrics may be made from new materials or use existing known materials formed via a novel cost effective process. Processes that convert optical/barrier/textural properties of already formed sheets/films/fabrics are also of high interest.
  
  High optical clarity and low haze in thin films/sheets is a property desired in a number of applications. These range from food packaging where freshness and quality of the food can better perceived to wound dressings which allow better visualization of the wound to follow the healing process.
  
  There are materials which provide the required optical clarity and other required barrier properties, but the sheet or fabric making process can in itself make the overall cost too high. An example being woven PET (Polyethylene Terapthalate), where the required optical clarity is good, but the woven process is slow and expensive. In this Tech Need we seek cost effective mesh like sheets/films/fabrics with high optical clarity and low haze equivalent to woven PET but at lower cost.
  
  The resulting sheet/film/fabric will be evaluated based on
  
  - Optical clarity and low haze. Visual inspection and high light transmission levels (e.g. >60%) being an indication of this.
  - Cost effectiveness of production (material and process)
  - Ability to be processed in current machines.
  - Water diffusion Leer más
D-191empresa anónima / Estados Unidos 1020

Envía tu propuesta>> Compartir demanda>>
Seeking: Ways to stop the spread of infection in the home when a family member is sick

infection, disinfecting,
- Resultado deseado
  
  We're looking for sanitizing/disinfecting solutions for when a member of the household falls ill. Solutions should enable sanitizing or disinfecting "high-traffic" and special items such as pillowcases and towels.
  
  12/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  When a family member becomes ill, the household goes into overdrive to minimize the chance that the rest of the family will also become ill.
  
  Part of this heightened routine involves making sure that objects touched by a sick child (or sick adult) are cleaned and not handled by other members of the family. The sick family member may have a "special" glass, cup, dish, or silverware that is washed frequently and not mixed with others or used by other family members.
  
  But softgoods can also carry infection: bedclothes and pillows, or sickroom (or house) furniture.
  
  Touch spreads most infection, so it is important to sanitize anything that a sick family member comes into contact with, regardless of the material it's made of.
  
  Thus, we're looking for solutions (or a set of solutions) to help the family contend with a sick family member, and protect the rest of the family from infection. Such solutions might be able to:
  
  o Treat hard surfaces (tables, counters, dishes) and soft surfaces (bedclothes, pillows, towels, chairs, clothes).
  
  o Integrate well into tasks the family is already doing to help the sick person: Wash (dishes, bedclothes), bathe (the sick family member), clean (surfaces) -- especially high-touch surfaces such as toys, remote controls, and furniture.
  
  o Of interest are solutions that are long-lasting, broad-spectrum, as automatic as possible, convenient, and as consumable as a paper towel. Through-the-air delivery is an option we're also interested in.
  
  o Of interest are solutions that give an indication they have accomplished the goal of disinfecting both hard and soft surfaces.
  
  CONSTRAINTS
  
  Your proposed solution should:
  
  o Kill, prevent, remove, or repel bacteria and viruses.
  
  o Have antimicrobial test results showing efficacy on hard and soft surfaces and/or clinical testing results.
  Leer más
D-239empresa anónima / Reino Unido 1414

Envía tu propuesta>> Compartir demanda>>
Orally delivered modified release drug delivery systems to overcome first-pass metabolism

Drug, Delivery, metabolism,
- Resultado deseado
  
  A global OTC drug products group with offices in the UK is seeking orally delivered modified release drug delivery systems that extend the efficacy of active pharmaceutical ingredients (APIs), which are susceptible to a large first-pass metabolism.
  
  27/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The choice of modified release dosage form for drugs is mainly determined by their physicochemical properties. In general, modified release systems are considered unsuitable for APIs which undergo extensive first-pass metabolism. The lack of technologies that fulfill the function of delivering such actives puts limitations on the ability to achieve further therapeutic benefits and consumer benefit for these classes of APIs.
  
  Technical Requirements
  The target is therefore to access orally delivered modified release drug delivery systems that extend the efficacy of certain APIs by avoiding and/or overcoming pre-systemic metabolism. Potential dosage forms include tablet, liquid, capsule, granules, etc. The release may occur in the gastrointestinal tract ranging from the oral cavity to the large intestine. There will be a requirement to potentially meet a variety of local and/or global regulatory requirements.
  
  Additional Supporting Data Required:
  Mandatory :
  • A theoretically convincing principle that could enable extended efficacy over a certain period of time (12 hours or more), AND
  • Preliminary data/models (not limited to dissolution test) that demonstrate proof of principle against APIs that face similar issues described above.
  Preferred:
  • In vivo data that demonstrates the proof of the principle against APIs described above.
  Desirable:
  • Compatibility with other drug delivery platforms.
  
  The materials should also meet the following requirements for incorporation into a consumer product:
  – Compatible with typical Health Care product packaging and storage
  – Not require storage or handling under special or inert conditions, e.g. under nitrogen or under oil.
  – Cost appropriate for consumer products (when incorporated at the required level). As examples, this means maximum £20/kg (GBP) for an ingredient incorporated at 1-5%, and maximum £250/kg (GBP) for an ingredient incorporated at <0.1%
  – Technologies must be capable of withstanding any process stresses e.g. temperature without chemical degradation or any adverse effects
  – Technology must not reduce the existing quality of the user’s experience e.g. poor taste, smell etc.
  – Able to be incorporated into current products using simple batch mixing at room temperature and atmospheric pressure with minimal heating/cooling and no or minimal changes required to current clean-down processes.
  – Not be harmful for human use (not classified or suspected to be a toxin, carcinogen, mutagen, irritating to the human respiratory system) with respect to the concentrations used in the final product. Not harmful to the environment (including not being a photo-reactive volatile organic compound).
  – Ideally offer scope for patent protection with the desired application and format.
  – Not negatively affecting the efficacy or aesthetics of the final product.
  – Ingredients should be Reach supported
  Leer más
D-382empresa anónima / Reino Unido 3076

Envía tu propuesta>> Compartir demanda>>
Demanda tecnológica >> buscamos sustituir el relleno de piedra caliza en materiales de construcción a partir de residuos "post-consumo"

limestone fillers, Construction, post consumer waste, indoor building, construction materials, industrial waste
- Resultado deseado
  
  Estamos buscando conocimiento, experiencia y capacidad de suministro de residuos "post-consumo" que puedan ser utilizados como componentes de relleno en la fabricación de nuevos materiales de construcción. El relleno es una gran parte del producto final, su contenido puede variar del 10 al 80%, y se utiliza para dar volumen o disminuir la cantidad de polímeros caros, resinas, etc. En la actualidad se utilizan para este proposito los rellenos de piedra caliza que se obtienen bien como material virgen o a partir de residuos industriales
  
  17/09/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando conocimiento, experiencia y capacidad de suministro de residuos urbanos que puedan ser utilizados como componentes de relleno en la fabricación de nuevos materiales de construcción.
  
  Cuando nos referimos a un material post-consumo estamos hablando de un "material recogido/recuperado a partir de productos que ya han sido utilizados para el propósito para el que fueron originalmente fabricados", o un "material acabado que normalmente se elimina como residuo después de haber completado su ... Leer más

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en hard gelatin capsule : Oportuni... | Demandas

Innovación en hard gelatin capsule : Oportuni... | Demandas

wet granulation, sustained release, generic product, high potency drug, hard gelatin capsule, multidose pharmaceutical product, scale up process, GMP, ICH, FDA, EMEA

hard surface, cleaning, Freshness, Perfume delivery, Detergency, Pro-perfume

CR39, coating

El recubrimiento debe tener una buena adherencia, claridad y propiedades de resistencia a los arañazos. Debe pasar los tests de corte transversal y de lana de acero. El recubrimiento será sometido a los tests de agua hirviendo y de inmersión en agua salada. Debe superar todas estas pruebas.

Anti-fouling, detritus, removal, hard surface

We need components to make up one or more systems that can remove surface contamination (biofilms), lime scum, lime scale buildup, ameliorate water hardness, remove mold, mildew, and similar spores, handle soap scum, and remove surface detritus from a variety of materials.

Microencapsulation, encapsulation, microcapsule, Microcapsules, biocide active ingredients, biocide, biocides, agrochemicals, Insecticide, pest control

ceramic processing, ceramic cutting, finishing hard materials

Phosphates free, detergents, cleaning, eco friendly, binders, hard water, Surfactants, sequestrants

Marketing bluetooth, linux, mobile, linksys, hardware

To assemble an electronic device that has a Linux operative system with some USB Bluetooth emitters and with a USB hard disk, all integrated in a case, all unified in one unity and with different USB ports ( to unify the hardware with several USB)

Drying Technology, Household Goods & Appliances, Water drying, evaporation

Cleaning Technology, Household Goods & Appliances, Washing, cleaning, Water, energy usage, Preasurized cleaning, Low cost

disinfecting, surface

surgery, gauze, smart textiles, medicine, sutures

polymers, biopolymers, bio-nanocomposites, polymer fibers, polymer fiber-nanocomposites, wound dress

infection, disinfecting,

We're looking for sanitizing/disinfecting solutions for when a member of the household falls ill. Solutions should enable sanitizing or disinfecting "high-traffic" and special items such as pillowcases and towels.

Drug, Delivery, metabolism,

A global OTC drug products group with offices in the UK is seeking orally delivered modified release drug delivery systems that extend the efficacy of active pharmaceutical ingredients (APIs), which are susceptible to a large first-pass metabolism.

limestone fillers, Construction, post consumer waste, indoor building, construction materials, industrial waste

Usuario nuevo (registro gratuito)

Usuario registrado