Innovación en thermal management : Oportunida...

1 2

D-332empresa anónima / Reino Unido 1957

Envía tu propuesta>> Compartir demanda>>
Non-thermal sterilisation and innovative packaging technologies for wet and dry food products

non-thermal sterilisation, improved sensorial profile, paper-based packaging, biopolymers,
- Resultado deseado
  
  New methods to sterilise ‘wet’ products (soups, stocks etc) which minimises the negative impact on freshness of flavour, nutritional content, colour, taste and texture. Specifically non-thermal processes to achieve ‘commercial sterility’. Also innovative flexible packaging materials which are more ‘natural’ and sustainably sourced, involving less wastage / increased recyclability etc. Paper-based options are especially of interest for dry products (e.g. stock cubes, powdered soups etc)
  
  20/05/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are working with a large European food products company, specialising in innovative ingredients to ‘help you cook’ – their range of ambient products includes:-
  - ‘Wet’ food (soups, broths, vegetable sauces and ready meals)
  - ‘Dry’ foods and seasoning ingredients (dried soups, stock cubes, seasoning powders)
  These products assist consumers to prepare tasty and nutritious meals that have a natural and traditional ‘home-cooked’ flavour. Whilst these flavours are important to the consumer, we recognise the consumer’s desire for improvement in both the nutritional and sensorial profile of the products, as well as a reduction in the use of wasteful or eco-unfriendly packaging. Therefore, we are interested finding technologies / products / processes in the following areas:-
  
  New methods to sterilise ‘wet’ products which minimises the negative impact on freshness of flavour, nutritional content, colour, taste and texture. Specifically we are looking for non-thermal processes to achieve ‘commercial sterility’.
  
  Traditionally heat treatments are used to sterilise the products, either UHT process or retorting. These treatments negatively affect the colour, taste and nutritional content of the products - especially for ‘non-cooked’ products such as gazpacho; cheese-based or light-coloured sauces; vegetable based products.
  
  We are interested to find new, state-of the-art non-thermal sterilisation methods / technologies which will improve the nutritional and sensorial profile of the products.
  
  Example alternatives include:-
  - Pulsed electric fields, high hydrostatic pressure, ultra-high pressure homogenisation, plasma sterilisation, etc.
  
  Potential solutions should:-
  - Retain the nutritional values and textural qualities of the ingredients
  - Provide a shelf life of 9-12 months
  - Avoid antioxidants / maintain a clean label
  - Be applicable to existing packaging such as cans, glass, Tetrapack, etc.
  
  Innovative flexible packaging materials which are more ‘natural’ and sustainably sourced, involving less wastage and increased recyclability etc. Paper-based technologies are especially of interest, but biopolymers will also be considered.
  
  Presently much of the client’s flexible food packaging involves multilayer structures (usually including aluminium and / or plastic materials) which are not easily recyclable and are perceived as not natural by the consumer.
  
  We are seeking novel, improved ‘active’ paper-based packaging innovations and biopolymer materials for dry soup pouches and stock cube (compressed & moulded) wrappings. Solutions could be modified paper with enhanced barrier properties (moisture, gases, aromas, oil resistance) through the use of surface treatments, additives, etc.
  
  The packaging materials must provide:-
  - Adequate stiffness for standard manufacturing processes
  - Medium / high barrier properties
  - Fat resistance
  - Ability to seal and fold (in the case of stock cubes)
  
  Potential solutions should:-
  - Reduce the use of non-renewable resources
  - Reduce the overall amount of packaging / waste
  - Reduce carbon footprint
  
  Leer más
D-794Parc de Recerca UAB / España 1039

Envía tu propuesta>> Compartir demanda>>
Buscando un socio para el desarrollo de un sistema global de energía y gestión de la producción de plantas industriales

production management, energy management, industrial plants, Software, hardware, Lean manufacturing, Manufacturing, industrial engineers, industrial engineering, industrial processes
- Resultado deseado
  
  Type of Partner Sought: someone who manufactures hardware. The EU partner (SME) has to be directly involved in the hardware side, developing a device capable of taking historical consumption data for each computer you want to analyze and transmit power via software communication protocols:
  - Manufacturer of metering device compatible with PLC
  - API developer of the API
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Tipo de socio buscado: alguien que fabrica hardware.
  
  El socio de la UE (SME) tiene que estar directamente implicado en el hardware, desarrollando una herramienta capaz de tomar los datos históricos de consumo de cada equipo que desea analizar y transmitir energía a través de protocolos de comunicación de software:
  
  - Fabricante de dispositivo de medición compatible con PLC
  - API desarrollador del API Leer más
D-577empresa anónima / Reino Unido 1739

Envía tu propuesta>> Compartir demanda>>
Buscamos un material con conductividad térmica variable

thermal management, phase change materials, smart ceramics
- Resultado deseado
  
  Estamos trabajando con un proveedor líder de electrodomésticos que está buscando activamente materiales innovadores que tengan conductividad térmica variable. El cliente requiere una solución para ayudar a mantener la temperatura de la superficie de un producto calentado que opera en un entorno de cambios de temperatura y cree que un material con conductividad térmica variable podría lograr este objetivo. Este material actuaría como un tampón entre el elemento de calentamiento y la superficie de trabajo.
  
  03/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The heating element is constantly maintained at 230°C whilst the working surface, which is loosing heat at a variable rate to the environment, is to be maintained consistently at 130°C ± 10°C. It is the buffer material we are seeking that will thermally manage this device by triggering the change in its thermal coefficient. For example if the working surface drops to below 130°C, the heat conductivity of the buffer material will automatically increase allowing more heat to pass from the heating element to the working surface thereby increasing the latter’s temperature. Conversely, if the working surface rises above 130°C, then the buffer material’s heat conductivity will decrease immediately to stop further heat transfer from the heating element.
  
  The material should:
  
  • Be able to increase or decrease its thermal conductivity by a factor of 10 when triggered by the temperature change or sensors in the working surface.
  
  • Ideally should be less than 10 mm thick.
  
  • Be highly reactive i.e. able to change the magnitude of its heat conductivity quickly, ideally within seconds.
  
  • Allow multiple cycles over the life of the product, at least 500 hours
  
  Potential solutions of interest, amongst others, could be:
  
  • Phase change materials
  • Thermal composites
  • Shape memory materials
  • Switchable materials
  • Smart ceramics
  • Domain managed material
  • Thermal interface materials
  • Reversible grain structures
  • Doped materials
  • Nano-composite material
  • Thermal management materials
  
  Our client is not interested in solutions that are based solely on mechanical principles and/or are too complex to be incorporated into a domestic appliance. A combined solution would however be considered.
  
  Our client is a leader in innovative design and branding of products and is able to offer a speedy entrance to market through established marketing channels. We are happy to review solutions at all stages of development from proof of concept through to commercially available materials.
  Leer más
D-515empresa anónima / Reino Unido 1766

Envía tu propuesta>> Compartir demanda>>
Buscamos materiales innovadores y soluciones para mantener un líquido caliente durante 2 horas en una recipiente (por ejemplo, tecnología de vacío, aislamiento, revestimientos, materiales de cambio de fase y recubrimientos)

Thermal insulation, phase change materials, coating to retain heat
- Resultado deseado
  
  Estamos trabajando con un proveedor líder de productos para cocina, que está activamente buscando tecnologías innovadoras, productos y soluciones para conservar la temperatura del café de filtro hasta un máximo de 2 horas desde su elaboración. Por tanto, estamos interesados en encontrar soluciones que mantengan la temperatura adecuada del café, sin deterioro en el sabor o el aroma, a un precio más competitivo.
  
  12/05/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Existing solutions use either a glass storage container on a hot plate, or a thermal-type jug/carafe that is glass-lined plastic or twin-walled stainless steel. Using a hot plate provides hot spots and affects the taste of the coffee, so is not of interest. Thermal-type jugs have issues balancing performance against cost, e.g. plastic/glass-liner jugs are cheap, have good performance but they can be fragile, whereas stainless steel is robust but more costly. Our client is keen to find solutions that provide the performance and durability of stainless steel with the cost of glass-lined plastic jugs. Solutions may be found from other industries that work with heat maintenance, management, preservation and/or insulation, and could include:-
  
  • Improved vacuum insulation technology for the jug
  • Innovative thin insulation materials to replace vacuum
  • Technology to prevent temperature drop as coffee enters jug
  • Coatings / films to keep heat in the jug
  • Liner materials
  • Innovative jug designs to prevent heat escaping through the lid (contains hole for coffee to drip into jug)
  • Phase change materials that absorb heat and return it to maintain coffee temperature
  
  The liquid currently enters the storage device at ~80-90°C, and the volume is between 300ml – 1400ml. The maximum accepted temperature drop is 3 degrees per hour for maximum volume and 6 degrees per hour for half of the maximum volume.
  
  Potential solutions should therefore: -
  
  • Keep fluids at original temperature in bulk (without reheating), regardless of the volume
  • Use food-safe materials and enable safe use by the consumer
  • Be a bulk-storage solution (e.g. a jug)
  • Use cost effective materials or provide improved performance allowing material reduction
  • Provide proven functionality and claimable differentiation
  • Be protected by IP
  
  The temperature preservation function should not require changes to the architecture of the coffeemaker itself and only alter the storage (e.g. jug). However, innovative solutions delivering good price/performance which might require some minor changes to the coffeemaker will be taken into consideration.
  
  The client company is a leader in innovative design and branding of products and is able to offer any potential partner the benefit of extensive marketing and cost-effective manufacturing. All this enables a speedy entrance to market through established marketing channels. We are willing to explore any reasonable commercial arrangements, including licensing in, strategic alliances, partnering arrangements or even outright acquisition.
  Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-643empresa anónima / Suiza 1695

Envía tu propuesta>> Compartir demanda>>
Buscamos material que controle la humedad y solución de diseño para packaging de Productos Frescos de venta al por menor

Fresh produce, water vapor transmission resistance, Control Atmosphere Packaging, CAP, food waste, food spoilage, retail, moisture control
- Resultado deseado
  
  El resultado deseado es una solución tecnológica de coste adecuada que puede ser implementada en los envases flexibles. La propuesta debe ser considerada como una solución total del packaging (puede ser una combinación de multimateriales y / o diseño de un embalaje específico). Debe cumplir las siguientes características: permite grandes ventanas transparentes para que el consumidor pueda ver las frutas y verduras que hay en su interior, debe permitir el envasado en atmósfera controlada - PAC (concentración a medida de CO2 y O2 en el envase) y debe permitir que el exceso de humedad atrapada en el paquete sea removida.
  
  Somos una empresa química grande y global con una cartera diversificada de "specialty chemicals", materiales avanzados, "agrosciences" y negocio del plástico. Tenemos más de 50.000 colaboradores a nivel mundial y invertimos al año más de 1 billon de dólares en I+D
  
  28/09/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Food spoilage is becoming a growing concern at every level of the food supply chain. Not only for the environmental impact (biggest contributor to the carbon footprint) or to preserve food resources to feed the growing population but also for its dramatic cost contribution in companies bottom line. Solutions presented should consider that there is significant value for retailers and brand owners/packers to increase shelf life and quality of fresh produce in order to reduce food spoilage in depot or retail storage as well as at the consumer level. A significant portion of that waste comes from poor moisture management in the package that generates condensation and eventually discoloration, change of taste and texture, mold grow etc… Improving moisture management may improve shelf life for a couple of days which could have a dramatic impact on the reduction of food spoilage. Leer más
D-730empresa anónima / Reino Unido 929

Envía tu propuesta>> Compartir demanda>>
Buscando un fluido, o un habilitador químico que pueda atacar selectivamente la película de material autoadhesivo señalado y químicamente "cortar" las formas elegidas

Chemistry, cutting, vinyl, signage, materials, inkjet
- Resultado deseado
  
  We are seeking a fluid, or enabling chemistry which can selectively attack the film layer of self-adhesive signage materials to chemically ‘cut’ the chosen shapes. Such a solution could be applied by current thermal or piezo inkjet technologies, allowing an alternative to current mechanical solutions.
  
  27/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando un fluido, o un habilitador químico que pueda atacar selectivamente la película de material autoadhesivo señalado y químicamente "cortar" las formas elegidas. Tal solución podría ser aplicada por las actuales tecnologías de inyección de tinta térmica o piezoeléctrica, lo que permite una alternativa a las actuales soluciones mecánicas. Leer más
D-731empresa anónima / Reino Unido 4268

Envía tu propuesta>> Compartir demanda>>
Buscando nuevo químico para atacar selectivamente la capa de película de los materiales señalados de autoadhesivas (vinilo, polipropileno o polietileno) para químicamente "cortar" las formas elegidas

vinyl cutting, self adhesive signage, cost effective laser cutting
- Resultado deseado
  
  We are seeking a fluid, or enabling chemistry which can selectively attack the film layer of self-adhesive signage materials to chemically ‘cut’ the chosen shapes. Such a solution could be applied by current thermal or piezo inkjet technologies, allowing an alternative to current mechanical solutions.
  
  28/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando un fluido, o habilitador químico que pueda atacar selectivamente la capa de película del material autoadhesivo señalado para químicamente "cortar" las formas elegidas. Tal solución podría ser aplicada por las actuales tecnologías de inyección de tinta térmica o piezoeléctrica, lo que permite una alternativa a las actuales soluciones mecánicas. Leer más
D-800Indepth Water Services and Management Limited. / Kenia 1154

Envía tu propuesta>> Compartir demanda>>
Buscando innovaciones tecnológicas en el campo del tratamiento de aguas residuales y su reutilización.

water reuse, waste water treatment, wastewater treatment, WWT
- Resultado deseado
  
  Solution should be environmentally clean and green, should have a small foot print, consume little to no electrical energy, by products after treatment should be harmless to the environment, no consumables should be used in the system, no maintenance or service required.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  La solución debe ser ambientalmente limpia y verde, debe tener un tamaño pequeño, consumir poca o ninguna energía eléctrica, los productos de después del tratamiento deben ser inocuos para el medio ambiente, no se deben utilizar consumibles en el sistema, no debe haber necesidad de mantenimiento o servicio requerido. Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-705empresa anónima / Estados Unidos 1873

Envía tu propuesta>> Compartir demanda>>
Buscamos dispositivos sensoriales para medir las propiedades térmicas/físicas de productos alimenticios en estado fresco y congelado

sensors, frozen food, fresh food, physical properties measurement, water content
- Resultado deseado
  
  Un dispositivo sensorial capaz de medir las propiedades físicas de los productos alimenticios frescos y congelados y ser adecuado para la medición y la operación dentro de un entorno de procesamiento de alimentos.
  
  Compañía multinacional que opera a nivel mundial en los sectores de energía y química con alrededor de 25.000 empleados en todo el mundo.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Instrument/device capable of measuring the individual characteristics of a food product. Measurement requirements would be in both fresh and frozen conditions.
  
  The device needs to be able to measure, if possible, the complete composition of the food product but in particular the amount of water present. In the fresh condition this would be the percentage of water and in the frozen condition this would be the amount of frozen water (ice).
  
  The instrument/device needs to be robust enough for use in a food processing environment where it would be subject to low temperatures and a wet and humid environment. The capability for multiple measurements would also be necessary as well as the ability to cover a conveyor belt up to a width of 1.5m wide. Leer más
D-474empresa anónima / España 2259

Envía tu propuesta>> Compartir demanda>>
En busca de soluciones viables para el desarrollo de una motocicleta totalmente eléctrica con motor tipo HUB PMBLDC

motorcycle, electrical engineering, wheel hub motor, brushless motor, PMBLDC, fully electric vehicle
- Resultado deseado
  
  Estamos buscando soluciones viables para el desarrollo de una motocicleta totalmente eléctrica con motor HUB (en la rueda) PMBLDC (imán permanente sin escobillas de corriente continua) con un rendimiento cercano al de los motores convencionales de combustión interna de motocicletas. También estamos buscando alternativas de diseño que mejoran el rendimiento de motocicletas en situaciones de alta torsión (pendientes de hasta el 8%) y, preferiblemente, que evite el consumo excesivo de energía de la batería.
  
  21/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are an european company designing and manufacturing fully electric vehicles. We are interested in studying feasible solutions for developing a fully electric motorcycle with a performance near to conventional internal-combustion motorcycle.
  
  We are looking for feasible solutions for developing a fully electric motorcycle with motor HUB (in the wheel) PMBLDC (pemanent magnet brushless direct current) kind with a performance near to conventional internal-combustion motorcycle. Also we are seeking design alternatives that improve motorcycle performance in high-torque situations (slopes up to 8%) and, preferably, that avoid excessive consumption of battery power.
  
  We currently have issues with electric motor performance in high-torque situations. The type of engine which we intend to improve is a wheel hub motor (in-wheel) of PMBLDC (Permanent Magnet Brushless Direct Current) kind, with maximum external dimensions of a 13-inch tire and with nominal power of 5-7 kW. The Rated-voltage/Rated-current ratio would roughly be 96V/50A with a speed range of 0-1200 rpm, a maximum torque above 200 Nm and a starting torque greater than 100 Nm. The thermal response would be self-cooling in nominal conditions.
  
  We are looking for technology suppliers who can provide us with engines meeting the above requirements, or agents who can develop design alternatives that improve motorcycle performance in high-torque situations (slopes up to 8%) and, preferably, that avoid excessive consumption of battery power.
  Leer más
D-340empresa anónima / Estados Unidos 1245

Envía tu propuesta>> Compartir demanda>>
Real-time sensor to measure component surface exposure to strain, heat flux, and temperature

sensor, high temperature, heat flux, strain
- Resultado deseado
  
  We need to determine the exposure/service conditions of a component inside a high pressure gaseous reaction pressure vessel in real time while it is operating at extremely high temperatures and pressures. We want to measure surface conditions of strain (first choice) and heat flux (second choice) and temperature (third choice) inside an operating gaseous on several locations on a component.
  
  28/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  Ambient conditions seen by the component inside a high pressure reactor are a gas temperature of 1500°C, gas pressure of 50–60 atmospheres, heat fluxes of 1–3 MW/m2 though the component and a CO/Hydrogen gas. Analyses of the damaged and failed equipment indicate that surface temperatures on the specially cooled component must have reached 600°C – 700°C and that temperature must be cycling to have produced the thermal fatigue cracks observed. The component is internally cooled by high pressure cooling water operating at a temperature of 180 degrees C. We need to document and monitor surface conditions of the component inside a running reactor.
  
  The component is roughly cylindrical with one end placed into the high pressure, high temperature conditions. The cylinder is round on one end with a diameter of 0.4 meter, total length of about 3.5 meters and weight of 2,000 kg. All surfaces are of convex curvature. Only the end of the cylinder exposed to the reactor – about 0.1-0-.2 meter x 0.4 meter diameter – must be monitored. Measurements of areas of a square centimeter would be adequate, while smaller areas of 5mm x 5mm would be great. A total of 10 locations will be adequate over the surface of the component. Surface properties to be measured in priority order are 1) strain, 2) heat flux, and 3) temperature.
  
  The component wall thicknesses are 2-4 mm and are made of Inconel (nickel-chromium-iron) and stainless steel (iron-chromium-nickel) alloys. The components contain high pressure cooling water at a temperature of 180 degrees C.
  
  When operating, the reactor pressure vessel is sealed and also contains the component. Any measurement information from the sensor must be conveyable out through the pressure vessel, by electrical signals via insulated wires or via optical fibers or other means.
  
  Perhaps use of X-ray diffraction to measure the lattice strain of the alloy at the surface could be accomplished, which is a known method to measure materials strain for research.
  
  CONSTRAINTS
  • Seek a ready-to-use, mature, and demonstrated measuring/sensing technology. We do not have time to enter a development cycle.
  • Able to withstand the extreme conditions inside a sealed, high pressure gaseous reactor, and report in real time through a pressure vessel.
  • Maximum thickness of sensor should be a 3 mm. The presence of the sensor should not greatly affect the measurement of strain, heat flux, or temperature.
  • Need concept to adhere/glue/weld/stick the sensor to the smooth component surface or
  a concept or method to monitor the surface by “looking” at the surface with some sort of light or radiation
  • Frequency of sensor response should be at least +/- 2 seconds.
  • 1st choice - component surface engineering strains to be measured are 0.05% +/- 0.02%
  • 2nd choice - heat fluxes to be measured are 1-3 MW/square meter +/- 0.2 MW/square meter
  • 3rd choice - component surface temperatures to be measured are in the range of 400-800 degrees C to a tolerance of +/- 20 degrees C.
  • Sensor life during operation of the reactor should be at least one month and preferably one year.
  
  POSSIBLE SOLUTION AREAS
  Industries of interest might be aerospace propulsion (engines), space craft propulsion (engines and atmosphere reentry protection systems),, fossil fired combustion facilities, petrochemical plants, chemicals plants, heating, ceramics manufacturing, steel/iron making, heat treatment, insulation, thermal radiation management, pulp and paper processing facilities, nuclear power plants, incinerator facilities, studies/equipment by power generation facilities and similar organizations.
  
  Field Of Use and Intended Application
  Monitor surface conditions of components used in high pressure and high temperature chemical reactors. The components under consideration are devices which inject reactants and materials into high pressure and high temperature reactors.
  
  Desired Outcome
  Real-time instrumentation to determine the exposure/service mechanical surface conditions of a component which is vital to the function of a chemical process. The information would be used to diagnose equipment failure mechanisms, to validate adequate lifetimes of new equipment and to measure conditions, which could then be reproduced in equipment prototype testing rigs to evaluate alternate equipment designs and materials before substitution into commercial plants. The effort aims to increase component lifetimes, which will reduce maintenance costs and also improve plant productivity.
  
  Previously Attempted Solutions
  Welded thermocouples have been placed in various locations, but they compromised the integrity of the component being measured, have limited lifetimes and are fragile in operation and during installation.
  
  Optical pyrometers were used to look at the surface to measure temperatures, but particles in the gas interfered with the measurements.
  
  Strain gauges were not successfully placed on the face of the component being tested. We could not understand how to attach the gauges to the surface and also get the signal out of the pressure vessel.
  
  We also use mathematical modeling to determine the heat fluxes, surface temperatures, and surface strains of interest. But we need real measurement to confirm or to adjust or validate these predictions.
  Leer más
D-334empresa anónima / Reino Unido 1818

Envía tu propuesta>> Compartir demanda>>
Innovative devices to reduce / monitor water consumption or to assist in recycling water

water saving, water monitoring, water recycling, taps / toilets / showers
- Resultado deseado
  
  Innovative technical devices to reduce water consumption or assist users in monitoring their consumption of water, for use with taps / faucets, showers, baths & toilets, in both domestic and commercial usage. Also new, inexpensive and innovative ways to help recycle water e.g. garden water (collection, storage, usage), hot water tanks, cyclinders, central heating systems, grey water recycling devices etc. Devices should be easy to fit by consumer or competent plumber, retro-fit or new fit.
  
  31/05/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The management of water consumption is becoming increasingly necessary as the global population grows and consumers in the developed world become compelled to reduce their environmental footprint. We are keen to find innovative technical devices to reduce water consumption, and have focused on applications where consumers use and therefore potentially waste the most amount of water. We are therefore searching for IP-supported, ideally DISRUPTIVE technology for the following markets:-
  
  - Domestic housing / consumer use
  - Public toilets
  - Hotel toilets / showers / baths
  - Schools / offices / social housing water consumption
  
  We are focused on gaining access to products that reduce water consumption, or assist users in monitoring their water consumption. These should be inexpensive devices to modify the following products:-
  
  - Taps / faucets
  - Showers / Baths
  - Toilets
  
  Additionally, we are also interested in new, inexpensive and innovative ways to help recycle water in some way, for example:-
  
  - Garden water (collection, storage, usage – plant watering, ponds, pools etc)
  - Hot water tanks / cylinders / central heating systems
  - Grey water / black water recycling systems / devices
  
  We are interested in products for both retro-fitting or new plumbing installations, but devices should be easily fitted by the consumer or a competent plumber. Complicated solutions requiring new plumbing formats are of lesser interest.
  Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-679empresa anónima / Brasil 1887

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías y enfoques para proporcionar atención preventiva y protección contra los riesgos ambientales comunes del ambiente

prevent, health, skin, body, fabric, protection, air, environment, cleaning, repellency, barrier.
- Resultado deseado
  
  Tecnologías adecuadas deberán suministrar beneficios tangibles en términos de salud, higiene o bienestar físico, así como proporcionar un sentimiento emocional más alto de seguridad, protección y seguridad. Reforzaran las ganas del consumidor de hacer un esfuerzo consciente para mejorar su sensación general de bienestar para ellos y sus familias.
  
  Los posibles 'hits' incluyen aditivos químicos que puedan conferir beneficios adicionales o dispositivos/procesos físicos que tengan un efecto local significativo en el medio personal o "indoor". Requeriremos por lo menos un nivel básico de evidencias de su desempeño/eficacia. Soluciones tecnológicas apropiadas idealmente debe ser fácilmente incorporado a las rutinas y actividades cotidianas tales como el lavado, higiene personal, cuidado de la piel y la limpieza doméstica.
  
  Gran organización multinacional, con presencia en diferentes países alrededor del mundo. Fabricamos y comercializamos varias marcas muy conocidas en el mercado. Más de 25.000 empleados y grandes inversiones en Investigación y Desarrollo. . . ..
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Three areas of particular interest have been identified:
  
  1) Air Quality Management (in the home, in the office, on the move, in public spaces)
  
  Approaches may include general ‘air cleaning’ (i.e. removal of undesirable agents within an enclosed space such as a living room or vehicle) or more personal approaches such as prevention or protection against inhalation / ingestion or contamination of individuals.
  Examples:-
  
  - airborne particulate suppression – sprays, devices, industrial processes?
  - dust / smoke / allergen / odour / pollen control
  - mould / fungal spore removal (related to high humidity environments)
  - airborne bacteria / virus removal
  - absorbents, scavengers and neutralization systems
  
  2) Fabric Treatments (as a means of delivering health / well-being claims and benefits to individuals rather than simply for fabric protection) including functional clothing, upholstery, bedding, and carpet treatments.
  
  Examples:-
  
  - antimicrobial fabric protection during use (e.g. post-wash residual protection)
  - particulate / dirt repellency
  - mould / mildew protection (during drying, storage and wear)
  - odour / allergen control treatments
  - pest repellency
  - skin benefits that can be delivered via fabric treatment
  (e.g. moisturizing, smoothness – see Cognis ‘skin-via-fabric’ approach)
  
  3) Skin / Body Treatments (including hair / scalp, eye, feet and compromised (but intact) skin)
  
  Examples:-
  
  - particulate / dirt repellency (esp. for shampoo / hair care treatments)
  - barrier protection for cracked, dry skin
  - fragile skin treatments (esp. for elderly, thinning skin)
  - eye /nose symptom relief from urban congestion / pollution
  
  To identify a range of technologies / approaches to deliver preventative care and protection against common environmental hazards in the urban environment.
  
  Air Quality Management (in the home, in the office, on the move, in public spaces)
  
  Fabric Treatments (as a means of delivering health / well-being claims and benefits to individuals rather than simply for fabric protection) including functional clothing, upholstery, bedding, and carpet treatments.
  
  Skin / Body Treatments (including hair / scalp, eye, feet and compromised (but intact) skin) Leer más
D-312empresa anónima / Estados Unidos 2851

Envía tu propuesta>> Compartir demanda>>
Seeking: Solution for Heavy Metal and Toxin removal

heavy metal, toxin, removal
- Resultado deseado
  
  We are seeking new technologies, methods or processes to enable the removal of heavy metals and toxins from waste streams in steel making. The waste produced during steel making contains many metal oxides and dioxins. The most toxic waste is when scrap is burned as this includes plastic, paint, etc.
  
  21/12/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Potential Solution Areas
  
  o Metal separation/extraction solutions - enable recovery and recycling of heavy metals. Especially iron oxide as this weighs most and separated out could lower transportation costs.
  o Abatement/reduction of dioxins - precipitation
  o Pelletizing dust on site - make less volatile, enable re-use in liquid slag and easier to transport
  
  A solution that enables on-site management of the dust would be high value add.
  
  Background:
  
  Waste (Dust) constitutes a serious disposal problem for steel companies and it is of extreme interest to be able to address the costs of handling. Some companies do exist that can recover zinc, iron, lead, calcium and other minerals from the dust; however the remaining residual material must still be land filled in secure dump sites. The cost to transport and landfill due to its toxic nature is high. Furthermore, future legislation is expected to be more and more stringent, and may pose significant problems for steel producers.
  
  Constraints:
  
  Needs to be Cost Effective solution when compared to landfill - currently approx E60 per ton
  
  Desired Outcome
  Ability to treat dust cheaply so it becomes less reactive and non-toxic (removal of heavy metals). It would then cost less to landfill as it won't be classed as toxic waste, and it could be reused with slag or other application.
  
  Previously Attempted Solutions
  Currently nothing in the market on how best to treat dust on site, majority is shipped away for land fill.
  
  Leer más
D-574empresa anónima / Estados Unidos 1865

Envía tu propuesta>> Compartir demanda>>
Buscamos nuevas tecnologías para la elaboración de "oil-water food systems"

processing, oil-water, Food
- Resultado deseado
  
  Las soluciones proporcionadas deben aportar valor añadido en términos de sostenibilidad, mejora de la vida útil / caducidad, y / o mejora de los atributos del producto (sensación en la boca, textura, sabor, aspectos nutricionales, etc.). Las técnicas existentes de procesado de "oil-water systems" son de coste relativamente bajo, pero tienen una serie de inconvenientes que pueden superarse con cualquiera de los valores añadidos citados anteriormente.
  
  Gran empresa americana del sector gran consumo. Especializada en la elaboración de alimentos y bebidas - fabricante y distribuidor. Aproximadamente 100 plantas de fabricación en EE.UU y Europa. 25.000 empleados. Sólida inversión en I+D para impulsar la innovación
  
  01/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Seeking novel processing technologies for oil-water food systems in the areas of mixing, thermal processing, emulsification, dosing, aeration, and change over. Processing of oil-water system is primary focus, but would be open to technologies relative to waste stream recovery and utilization.
  
  Solutions should have potential for food applications even if that was not their original intent or purpose. Must have potential to pass US FDA approval/inspection and adhere to existing US food safety legislation. Leer más
D-648Sauce Packaging Management / Reino Unido 1265

Envía tu propuesta>> Compartir demanda>>
Buscando papel/film comestibles o de rápida degradación para la intercalarlo en los alimentos

Food Interleaving, Edible Papers, Degradeable compositions
- Resultado deseado
  
  Un papel o película que sea comestible y pueda ser utilizado como intercalado en un producto alimenticio, o una composición que se degrade rápidamente que pueda utilizarse de la misma manera. Los productos actuales generan un desecho que no se puede utilizar para el consumo humano y deben ser vendidos a la alimentación animal, a un precio más bajo. Gran oportunidad para encontrar una solución que sería capaz de transferir el desperdicio de nuevo a consumo humano en el ciclo de producción
  
  25/09/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Solutions must be able to be used with food & be used as interleaving, applied inline in the packaging process in an automated solution. Preference wouls be for an edible solution but will consider a degradeable approach subject to this being able to fully degrade within a fast period of time.
  
  Full trial opportunities are available for potential solutions - likely testing required with food product to ensure no potential issues with affects on recipie, taste & texture. Leer más

Buscador de innovación destacado PANRICO SLU

Sobre PANRICO SLU

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-6empresa anónima / España 1018

Envía tu propuesta>> Compartir demanda>>
Energy efficiency in centralized buildings: solar-housing-floor information flow.

Energy efficiency, energy management, photovoltaic, solar energy, buildings
- Resultado deseado
  
  Our informatics’ product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energy efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  15/08/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our informatics product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energetic efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  We have information of the three areas (temperature, flows, etc) and all the information that we need of the system and /or the environment, but this information is only collected and the three areas are maintained independently, flow within them does not exist.
  
  Our system telemanages 12 centralized buildings, with a remote control system in real time and with an alert intelligent system. Currently there is a single interaction within the three basic areas: the heating demand in the building (number of flats that are demanding heating simultaneously) is used to have a more reliable control of the boiler, this allows saving energy (reducing the potency of the boiler) when the demand is low.
  
  We believe that the yield of the building can be improved if the three areas work and interact together: Could the solar panel information be useful for the production plant? We therefore wish to receive proposals of experts in energy management that could provide us with the knowledge of how to use the information we have, how to modify the behaviour (the control) of an area taking into account the acquired values in other areas, etc… in order to improve the yield of the building.
  
  The success of the received proposals will be evaluated comparing the yield with or without the interaction between areas.
  Leer más
D-636empresa anónima / España 3008

Envía tu propuesta>> Compartir demanda>>
Buscamos un material flexible (papel) con propiedades de sellado y resistente a la grasa que no afecten a la capacidad de reciclaje del papel

packaging, pack, bag, paper, sealable, sealing, seal, grease-proof, grease, recyclable, recycling, recycle
- Resultado deseado
  
  Los materiales / tecnologías que se propongan deben cumplir con los siguientes requisitos:
  
  - El material de base tiene que ser papel
  - Cualquier aditivo añadido al papel no perjudica su capacidad de reciclado completo
  - El material debe ser resistente a la grasa
  - El material debe ser hermético (condiciones de calor o frío)
  - El sellado obtenido debe ser hermético
  - El material es fácilmente convertible en una máquina de fabricación de bolsas estándar
  - El material cumple con todas las regulaciones de la UE en términos de contacto con los alimentos y la gestión de residuos.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Current paper-based bags are not sealable unless a plastic material is used in their composition. In most of the cases, a polyethylene material is extruded on top of the paper to allow the heat-sealing.
  
  Future regulations will push in the sense of more eco-friendly packaging. In other words, more recyclability and more packaging made of a single material.
  
  Paper bags cannot be sealed if they are not associated to a plastic layer which makes their recyclability impossible.
  Leer más
D-650empresa anónima / Reino Unido 938

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías o procesos que permitan la rápida eliminación de "sacrificial ceramic support structure(s)" después de la cocción a mano de la cerámica

ceramic processing, ceramic cutting, finishing hard materials
- Resultado deseado
  
  Nuestro cliente está especializo en la fabricación de sanitarios y fregaderos / escurridores de cerámica hechos a mano. El proceso de fabricación consiste en verter arcilla refractaria fina en un molde, insertar piezas de moldeo para producir una forma compleja en 3D, seguido de varias etapas de secado, esmaltado, cocción y rrecorte. Este proceso de recorte consisite en eliminar una parte significativa de cerámica que se utiliza para equilibrar la carga térmica, minimizar la distorsión y proporcionar soporte estructural, mientras la pieza se cuece en un horno.
  
  Nuestro cliente está buscando activamente una tecnología, producto o proceso que permita la producción más rápida, segura y/o más barata de artículos de cerámica mientras manteniendo la misma calidad de acabados. Soluciones pueden venir investigadores, de empresas con conocimientos del proceso de fabricación de cerámica, de industrias de corte y acabado de materiales duros, o empresas con maquinaria de procesamiento o consumibles.
  
  26/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The client can use a combination of handheld cutting tool, CNC machine or robotic cutting tool and grinding mechanisms to finish the piece. Whilst the automated processes can be used, they require extensive initial capital outlay, can take more time to use for a varying selection of sizes and do not provide the same high quality, hand-finished product for which our client is known.The handheld tools allow a quicker changeover for products, but are labour intensive, involving health and safety risks and can be costly in terms of blade costs.
  
  Solutions could come from academia, companies with an understanding of ceramic forming/processing, industries cutting or finishing hard materials, or companies with processing machinery or consumables, and include:-
  
  - Innovative ways to support the piece in the kiln and balance the thermal loading (therefore negating the need for the ‘lost part’)
  - Innovative cutting technology for fired ceramics or other hard materials (e.g. ultrasonic, water-jet, laser, ‘hot-wire’ etc)
  - Step-change in blade technology for angle grinder
  - Sacrificial materials / moulding components to create void for easier ‘break-off’
  - Additives, meshes, fillers, etc that can react to stimulus and replace cutting of ceramic
  - 2-step moulding and glazing process to allow piece to be ‘built up’
  - Innovative joining technology for ceramics or materials that are moulded or fired
  - Innovative ceramic forming technology
  
  Preferred solutions should ideally be:
  
  - Low capital outlay cost
  - Small manufacturing footprint
  - Minimal emissions / effluent
  - Quick (matter of minutes or less)
  - Robust enough to survive prolonged high temperature firing cycle (1200°C for 12-24 hours)
  - Allow the expected shrinkage of ceramic during firing
  
  Our client is a European manufacturer of high-quality ceramic products, known for their excellent design and guaranteed performance. The company has significant expertise in design and manufacturing and is keen to locate innovative technology or products that will improve their existing production process.They are willing to consider all types of potential collaboration. Leer más
D-555empresa anónima / Reino Unido 1603

Envía tu propuesta>> Compartir demanda>>
Buscamos materiales o procesos que formen hojas/peliculas/tejidos en mallas con alta claridad óptica y baja turbidez

polymers, biopolymers, bio-nanocomposites, polymer fibers, polymer fiber-nanocomposites, wound dress
- Resultado deseado
  
  Materiales o procesos rentables que formen hojas/peliculas/tejidos con propiedades ópticas/difusión/térmicas deseadas
  
  Buscamos materiales o tecnologías eficaces que forman hojas/peliculas/tejidos en mallas con alta claridad óptica y baja turbidez. La difusión del agua en las hojas y una sensación general (suave, flexible, no dureza similar al plástico) de las hojas formadas son requisitos necesarios.
  
  21/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The sheet/film/fabrics may be made from new materials or use existing known materials formed via a novel cost effective process. Processes that convert optical/barrier/textural properties of already formed sheets/films/fabrics are also of high interest.
  
  High optical clarity and low haze in thin films/sheets is a property desired in a number of applications. These range from food packaging where freshness and quality of the food can better perceived to wound dressings which allow better visualization of the wound to follow the healing process.
  
  There are materials which provide the required optical clarity and other required barrier properties, but the sheet or fabric making process can in itself make the overall cost too high. An example being woven PET (Polyethylene Terapthalate), where the required optical clarity is good, but the woven process is slow and expensive. In this Tech Need we seek cost effective mesh like sheets/films/fabrics with high optical clarity and low haze equivalent to woven PET but at lower cost.
  
  The resulting sheet/film/fabric will be evaluated based on
  
  - Optical clarity and low haze. Visual inspection and high light transmission levels (e.g. >60%) being an indication of this.
  - Cost effectiveness of production (material and process)
  - Ability to be processed in current machines.
  - Water diffusion Leer más

Buscador de innovación destacado COPCISA

Sobre COPCISA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-644empresa anónima / Suiza 2293

Envía tu propuesta>> Compartir demanda>>
Buscamos un método tecnológico que permita que tuberías a base de polietileno sean calentadas rápidamente mediante inducción más allá de su punto de fusión o punto de ablandamiento

pipe, induction heating, manufacture, installation, welding, connecting
- Resultado deseado
  
  El resultado deseados es un método que permitira a los accesorios de plástico a base de polietileno de las tuberías ser calentados rápidamente mediante inducción más allá de su punto de fusión o punto de ablandamiento. Se espera que esta tecnología reduzca significativamente el tiempo de soldadura de diferentes segmentos de tubería, haga del proceso de soldadura un proceso más "user friendly" y robusto y sea más fácil permitir la soldadura de secciones de tubería de materiales con diferentes coeficientes de dilatación térmica lineal.
  
  01/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The new solution should allow the production of pipe fittings consisting of PE either crosslinked or uncrosslinked that can be directly induction heated. This should avoid having to use external and inhomogeneous heat sources or the use of complex pipe fittings with embedded electrical heating wires. It is expected that this will reduce the cost to manufacture and the cost to install significantly.
  
  Currently pipe fittings are used to connect crosslinked pipes or pipe sections of different polymeric make up where welding is impossible. Most pipe fittings used today are also crosslinked and will shrink significantly upon heating, thereby connecting and providing closure. Heating of the pipe fittings is typically problematic. Either the fittings are heated through an external source or by electric currents. Heating through an external source is difficult as it is difficult to provide homogeneous heating and thus homogeneous shrinkage. Heating through electric current is difficult as it requires pipe fittings that have the electric current embedded in their structure making them expensive and laborsome. Leer más
D-767empresa anónima / Reino Unido 6727

Envía tu propuesta>> Compartir demanda>>
Seeking portable appliances or novel solutions to provide refreshment of clothing / personal garments– specifically removing smells and killing bacteria.

odour management, refresh clothes, bacteria disinfection, sterilisation, water-less laundry
- Resultado deseado
  
  We are urgently searching for novel solutions to provide refreshment of clothing / personal garments – specifically removing smells and killing bacteria. Our client specialises in providing innovative appliances for the cleaning, preparation and care of clothing and household fabrics. They are now searching for innovative technologies to allow consumers to ‘refresh’ or ‘sanitise’ clothing between each wearing occasion – i.e. instead of washing the clothes after each use, they can remove smells and bacteria to allow further wear. (Smells could also exist from extended storage). Products already exist to either kill bacteria or remove smells, but the client wishes to find technologies or products that provide BOTH benefits from a compact and affordable product.
  
  13/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our client is an established appliance manufacturer, and can therefore provide assistance for further development and eventual manufacture of products. Their preference is for products that are already on the market or that can be launched within the next 18 months – e.g. extend sales from an existing geographical market. The company is also interested to review technologies that can be adapted from alternative industries for the household market, and will consider all reasonable commercial agreements, including licensing, strategic alliances, partnering arrangements and acquisition. All potential solutions should have IP or proprietary knowhow, and be able to demonstrate technical feasibility (for this or other applications) within 6-12 months. Leer más
D-339empresa anónima / Estados Unidos 1226

Envía tu propuesta>> Compartir demanda>>
Insulation for gaseous reactor component that must withstand high temperatures

high temperature, reducing atmosphere, insulation, Iconel
- Resultado deseado
  
  This organization is seeking insulation for an internally cooled cylindrical component of a gaseous reactor. The end of the cooled cylinder inside the reactor is exposed to high heat fluxes of 1-3 MW/sq meter and an atmosphere consisting primarily of carbon monoxide and hydrogen. The aim is to lower the temperature of the exposed end of the cylinder by 100-200°C. The insulation should be durable, last at least one year and be able to adhere to or blanket a smooth metal surface.
  
  28/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  Conditions inside the gaseous reactor are extreme. Ambient temperature runs about 1500°C at 50–60 atmospheres, with a wind velocity of about 100m/s. The process runs continuously. Projected working lifetime of the reactor between maintenance shutdowns is two years; but because the cylinder component has not been able to be insulated sufficiently, reactor operations require much more frequent shutdowns.
  
  The component is roughly cylindrical with one end placed into the high pressure, high temperature conditions. Only the 0.1–0.2 meter portion of the cylinder that extends into the reactor must be protected. (The entire cylinder is round on one end with a diameter of 0.4 meter, total length of about 3.5 meters and weight of 2,000 kg.) All surfaces are of convex curvature. Currently, the cylinder is cooled internally, and this brings the outer surface to a temperature of about 700°C. This organization needs to insulate the end of the cylinder that enters the reactor (about 0.1–0.2 meter) so as to lower the surface temperature by 100-200°C. Additional internal cooling is not an option.
  
  The failure mode of the cylinder is thermal fatigue, which is failure by cracking causing by alternating stresses caused by alternating temperatures.
  
  Thermal barrier coatings, and underlying bond coatings to increase their adherence to various substrates, are known. However, those known to work at high temperatures have been designed for oxidizing combustion atmospheres; those designed to work with reducing atmospheres are perhaps not well known at similar temperatures. Coatings which work at temperatures of 300-400° C are known to work in reducing (hydrogen-containing) gases with hydrogen sulfide. In petroleum refinery process equipment This application is unique in that it is both high temperature and reducing.
  
  CONSTRAINTS
  • Must tolerate extreme environment for two or more years: exposure to a gas temperature of 1500°C, carbon monoxide-hydrogen reducing environment at 50–60 atmospheres, modest but high-frequency temperature fluctuations of 2-3 cycles per second and significant pressure fluctuations also of 2-3 per second, continuous operation, and turbulence inside the reactor.
  • Must lower the surface temperature of the cooled component by 100-200°C.
  • Must survive exposure to humid conditions when exposed to ambient air, as well as shipping and handling by plant personnel.
  • Must be chemically inert to reactions with carbon monoxide and hydrogen.
  • Thermal conductivity must be no more than one-half of the value of zirconium oxide (2.4 Btu/(hr-ft-oF or 4.1 W/m-oC)
  • Coating must stick/adhere to a smooth metal surface made of Inconel (nickel-chromium-iron) and stainless steel (iron-chromium-nickel) alloys. The components contain high pressure cooling water at a temperature of 180oC.
  • Failure (loss/spalling) of any insulating coat should not present a problem to the substrate or process. The insulating coating cannot affect the substrate other than by reducing its temperature.
  • A “nice to have” feature of the material surface is an emissivity of no more than 0.3, relative to a black body of 1.0. (a good reflector of thermal energy). Lower values will be superior in terms of reflecting more thermal energy away from the component.
  
  POSSIBLE SOLUTION AREAS
  Industries of interest might be aerospace propulsion, space craft propulsion, fossil fired combustion facilities, petrochemical plants, chemicals plants, heating, ceramics, insulation, thermal radiation management, pulp and paper processing facilities, nuclear power plants, incinerator facilities, studies/equipment by power generation facilities and organizations and similar organizations.
  
  Field Of Use and Intended Application
  High-temperature gaseous reactor.
  
  Desired Outcome
  Ideally, a coating that can be applied to the cylinder component to drop its temperature by 100-200°C.
  
  A substitute material for the Inconel alloy that is more resistant to thermal fatigue (higher fatigue strength, lower coefficient of thermal expansion and/or higher thermal conductivity) might be another avenue.
  
  Previously Attempted Solutions
  Plasma spray zirconium oxide, such as that used on aero and land-based turbine engine blades. This coating also requires a bond coat. This coating has failed in previous tests in similar conditions. The suspicion is that it is because the coating is designed for high temperatures in an oxidizing atmosphere (a jet engine), while the chemical process in question is highly reducing with hydrogen and carbon monoxide and the oxidized bond coat may not be stable in contact with hot hydrogen and carbon monoxide.
  
  Refractory bricks have been considered. However, the insulation must be tolerant of mechanical abuse. Refractory bricks tend to break and crack, causing thermal expansion problems. Leer más
D-775empresa anónima / Reino Unido 1313

Envía tu propuesta>> Compartir demanda>>
Buscando tecnologías eficaces para prevenir la evaporación o convertir en residuos no peligrosos los vapores de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol).

2-Pyrrolidone, 2-Methyl-1, 3-propanediol, chemical waste, harmless waste, industrial waste, waste management, chemical plants, Chemistry, encapsulation of vapours, binding of vapours
- Resultado deseado
  
  We are actively seeking an effective means to prevent the evaporation of - or otherwise convert into non-hazardous waste – certain vapors given off during a manufacturing process. These vapors are of the compounds 2-Pyrrolidone (2P) and 2-Methyl-1,3-propanediol (MP Diol).
  
  09/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando activamente un medio eficaz para prevenir la evaporación o convertir en residuos no peligrosos - ciertos vapores emitidos durante el proceso de fabricación. Estos vapores son los compuestos de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol). Leer más

Buscador de innovación destacado Orange R&D Spain

Sobre Orange R&D Spain

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-732ichnolite technologies / India 1222

Envía tu propuesta>> Compartir demanda>>
Buscando soluciones innovadoras en las medidas de seguridad ferroviaria, que aumentarían la seguridad de los pasajeros y evitarian colisiones ferroviarias

railway, railroad, Railway safety, rail collision, rail, passenger safety, unmanned rail gate stations, Trains, transport
- Resultado deseado
  
  Estamos buscando activamente información sobre medidas innovadoras de seguridad ferroviaria, soluciones que permitan mejorar la seguridad de los pasajeros y evitar colisiones ferroviarias o soluciones basadas en las estaciones de trenes sin personal trabajando donde no hay sistemas de bloqueo instalados. También algo que puede mejorar la eficiencia o actuaciones que se practican en gran medida en los países desarrollados. Por favor escriba cualquier tipo de productos patentados o pendientes de patente, soluciones, tecnologías, software de señalización que mejorarían la seguridad y la seguridad de los ferrocarriles. Muchas gracias por compartir con antelación.
  
  29/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Seeking for Joint venture in promoting innovative products, solutions based on enhancing current indian railway standards. Please let us know if anyone has got R&D on Rail and passenger safety standards.We are actively seeking information on innovative Railway safety measures, solutions, which would enhance passenger safety and avoid rail collisions or solutions based on unmanned rail gate stations where there is no blockers are installed. Also anything which can improve efficiencies or performances which are practiced heavily in developed countries. Please list any sort of patented or patent pending products, solutions, technologies, signalling softwares that would enhance Railways safety and security. Many thanks for sharing in advance. Leer más
D-792empresa anónima / España 1610

Envía tu propuesta>> Compartir demanda>>
Se busca un sistema para el acceso a plataformas de energía flotantes

Ships, marine structures, floating device, platform, buoy, offshore access system, energy platforms, marine, marine renewable energy
- Resultado deseado
  
  We are looking for partners to develop an Offshore Access System (OAS) for access to a buoy, platform or floating device from a support vessel. It will be a stabilized system for access between fixed and floating marine structures, characterized by incorporating two stabilized systems, each with 6 degrees of freedom, whose function is to compensate the dynamics of the structures, and other additional degrees of freedom (possibly 5) used for the correct positioning of the mechanical assembly.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando socios para desarrollar un sistema de acceso Offshore (OEA) para el acceso a boyas, plataforma flotante o desde una embarcación de apoyo. Es un sistema estabilizado para el acceso entre estructuras marinas fijas y flotantes, que se caracteriza por la incorporación de dos sistemas estabilizados, cada uno con 6 grados de libertad, cuya función es compensar la dinámica de las estructuras, y otros grados de libertad adicionales (posiblemente 5) utilizado para el posicionamiento correcto del conjunto mecánico. Leer más
D-530Newlogia / Italia 1475

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías de recubrimientos para cartón corrugado que aporten resistencia a la llama / propiedades retardantes a la llama

Corrugated paperboards flame retardant surface treatement
- Resultado deseado
  
  Seeking the opportunity to be a tester/early adopter of a new, possibly patented coating product, and available to participate to the developement of a first industrialized production line. Our customer control the whole supply chain of corrugated paperboard articles manufacturing, from paper pulp recycling to paper production, to cc assembly and article manufacturing.
  
  The desired outcome of this investigation is to define the best potential technology to be implemented by the customer
  
  20/08/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Buscamos la oportunidad de testar y ser el primero en adoptar un nuevo recubrimiento, preferiblemente patentado, y de participar en el desarrollo de una línea de producción industrial. Nuestro cliente controla toda la cadena de suministro de fabricación de artículos de cartón corrugado, des del reciclaje de pulpa de papel hasta la producción de papel, montaje y la fabricación de artículos. Leer más
D-824Capri Engineers / India 263

Envía tu propuesta>> Compartir demanda>>
Buscar información sobre una tecnología probada para convertir los residuos plásticos en combustible / Energía Eléctrica

Recycling of Post-consumer waste plastics & Recycling of Plastics, Reverse Pyrolysis, MSW
- Resultado deseado
  
  Should be able to use Waste Plastics (both post-industrial and post-consumer wastes) of all types and grades for this Conversion process. Have plans to start in a small scale to begin with 10-tons/day and later on with a possible tie-up with local councils and Government subsidies to have plant(s) with higher capacity.
  
  A recent study shows that in Chennai, in India, 8 to 10% of 4500-tons of MSW is Waste Plastics.
  A patented technology has been exposed to convert Plastics Waste (MSW) in to low quality Diesel - Reverse Pyrolysis method
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Debe ser capaz de utilizar plásticos de residuos (tanto los residuos post-industriales como los de post-consumo) de todos los tipos y grados en este proceso de conversión. La idea es comenzar a pequeña escala 10-toneladas/día y posteriormente con una posible alianza con los ayuntamientos y las ayudas del gobierno tener una planta (s), con mayor capacidad.
  
  Un estudio reciente muestra que en Chennai, en la India, del 8 al 10% de 4500-toneladas de RSU son de Residuos Plásticos.
  Existe una tecnología patentada para convertir los residuos plásticos (RSU) en diesel de baja calidad - método de pirólisis inversa Leer más

Buscador de innovación destacado Affinity Petcare

Sobre Affinity Petcare

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-472empresa anónima / España 2187

Envía tu propuesta>> Compartir demanda>>
Buscamos compuestos químicos o biológicos con propiedades ópticas dependiendo de la concentración de parámetros de calidad del agua para control de aguas residuales o superficiales

optical, water quality
- Resultado deseado
  
  Compuestos químicos o biológicos que tengan propiedades ópticas (absorvancia, fluorescencia, color) en función de la concentración de los parámetros de calidad del agua (pH, amonio, nitratos, cloruros, fosfatos, DBO ...) para aplicaciones de control de calidad de agua potable y de aguas residuales.
  
  13/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We develop water analyser for water quality control, and we are studding the possibility of new parameters to measure using optical techniques. We have technology for optical measure and online analysers but we need the chemical or biological compounds with the optical properties. Leer más
D-433empresa anónima / España 3457

Envía tu propuesta>> Compartir demanda>>
Buscamos compuestos químicos foto reactivos para polimerizar fibras cuando estas son expuestas a luz de una determinada longitud de onda

fiber coating, photoreactive, shape memory, water resistant, heat resistant
- Resultado deseado
  
  We are looking for a Raw Material that can be mixed with other materials during a production process or for a finished product ready to be used as such. Ideally, a Raw Material supplier has a chemical compound of these properties to offer. If not, we will also be open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  18/10/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos en busca de una materia prima que puede ser mezclada con otros materiales durante un proceso de producción o de un producto terminado listo para ser utilizado como tal. Idealmente, un proveedor de materia prima tiene un compuesto químico de estas propiedades para ofrecer. Si no, también estamos abiertos a: 1) conseguir un acuerdo de licencia, 2) adquirir la tecnología del producto y / o 3) iniciar un desarrollo conjunto Leer más

1 2

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en thermal management : Oportunida... | Demandas

Innovación en thermal management : Oportunida... | Demandas

non-thermal sterilisation, improved sensorial profile, paper-based packaging, biopolymers,

production management, energy management, industrial plants, Software, hardware, Lean manufacturing, Manufacturing, industrial engineers, industrial engineering, industrial processes

thermal management, phase change materials, smart ceramics

Thermal insulation, phase change materials, coating to retain heat

Fresh produce, water vapor transmission resistance, Control Atmosphere Packaging, CAP, food waste, food spoilage, retail, moisture control

Chemistry, cutting, vinyl, signage, materials, inkjet

vinyl cutting, self adhesive signage, cost effective laser cutting

water reuse, waste water treatment, wastewater treatment, WWT

Solution should be environmentally clean and green, should have a small foot print, consume little to no electrical energy, by products after treatment should be harmless to the environment, no consumables should be used in the system, no maintenance or service required.

sensors, frozen food, fresh food, physical properties measurement, water content

motorcycle, electrical engineering, wheel hub motor, brushless motor, PMBLDC, fully electric vehicle

sensor, high temperature, heat flux, strain

water saving, water monitoring, water recycling, taps / toilets / showers

prevent, health, skin, body, fabric, protection, air, environment, cleaning, repellency, barrier.

heavy metal, toxin, removal

processing, oil-water, Food

Food Interleaving, Edible Papers, Degradeable compositions

Energy efficiency, energy management, photovoltaic, solar energy, buildings

packaging, pack, bag, paper, sealable, sealing, seal, grease-proof, grease, recyclable, recycling, recycle

ceramic processing, ceramic cutting, finishing hard materials

polymers, biopolymers, bio-nanocomposites, polymer fibers, polymer fiber-nanocomposites, wound dress

pipe, induction heating, manufacture, installation, welding, connecting

odour management, refresh clothes, bacteria disinfection, sterilisation, water-less laundry

high temperature, reducing atmosphere, insulation, Iconel

2-Pyrrolidone, 2-Methyl-1, 3-propanediol, chemical waste, harmless waste, industrial waste, waste management, chemical plants, Chemistry, encapsulation of vapours, binding of vapours

We are actively seeking an effective means to prevent the evaporation of - or otherwise convert into non-hazardous waste – certain vapors given off during a manufacturing process. These vapors are of the compounds 2-Pyrrolidone (2P) and 2-Methyl-1,3-propanediol (MP Diol).

Estamos buscando activamente un medio eficaz para prevenir la evaporación o convertir en residuos no peligrosos - ciertos vapores emitidos durante el proceso de fabricación. Estos vapores son los compuestos de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol). Leer más

railway, railroad, Railway safety, rail collision, rail, passenger safety, unmanned rail gate stations, Trains, transport

Ships, marine structures, floating device, platform, buoy, offshore access system, energy platforms, marine, marine renewable energy

Recycling of Post-consumer waste plastics & Recycling of Plastics, Reverse Pyrolysis, MSW

optical, water quality

We develop water analyser for water quality control, and we are studding the possibility of new parameters to measure using optical techniques. We have technology for optical measure and online analysers but we need the chemical or biological compounds with the optical properties. Leer más

fiber coating, photoreactive, shape memory, water resistant, heat resistant

Usuario nuevo (registro gratuito)

Usuario registrado