Innovación en UV : Oportunidades ...

D-771empresa anónima / España 1152

Envía tu propuesta>> Compartir demanda>>
Se buscan nuevos ingredientes naturales como filtros UV para productos cosméticos

UV filters, ultraviolet filters, UV absorbers, cosmetic, cosmetics, sun care formulation, dermatology, skin, cream, lotion
- Resultado deseado
  
  We are seeking for UV absorbers from natural origin. Our main intention is to reduce the use of chemical filters with the aim of reducing the toxicity that cause the use of this kind of products. It's important that they could be formulated in a cosmetic product
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos en busca de absorbentes de UV de origen natural. Nuestra intención principal es reducir el uso de filtros químicos con el objetivo de reducir la toxicidad que causa el uso de este tipo de productos. Es importante que se pueda formular en un producto cosmético Leer más
D-826SelChem India / India 80

Envía tu propuesta>> Compartir demanda>>
Buscando tecnología / socio técnico de curado UV imprimación repintado automotriz y masilla para la fabricación y comercialización en la India.

primer, body filler, UV cured
- Resultado deseado
  
  Looking for easy to use, reliable, UV cured primer-surfacer & car-body filler offering same or better end properties as conventional products with added advantage in terms of faster drying/setting, energy saving, no pot-life issues, environmentally friendly etc.
  Should be easily adoptable by small and large garages without need for large investments or specialsed training for applicators. Application and curing methods should be easy to implement at the garage level.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Buscando un curado-UV imprimación-aparejo y auto-cuerpo de relleno, confiable, curado UV fácil de usar que ofrece iguales o mejores propiedades finales respecto a los productos convencionales con ventaja en términos de secado / ajuste, ahorro de energía, sin problemas de tiempo de empleo útil y respetuoso con el medio ambiente.
  Debe ser fácilmente adoptable por los pequeños y grandes garajes sin necesidad de grandes inversiones o especialidad de formación para los usuarios. Los métodos de aplicación y el curado deben ser fáciles de implementar a nivel de garaje. Leer más
D-488SelChem India / India 1614

Envía tu propuesta>> Compartir demanda>>
Buscamos "UV curable hard coating" para lentes CR39

CR39, coating
- Resultado deseado
  
  El recubrimiento debe tener una buena adherencia, claridad y propiedades de resistencia a los arañazos. Debe pasar los tests de corte transversal y de lana de acero. El recubrimiento será sometido a los tests de agua hirviendo y de inmersión en agua salada. Debe superar todas estas pruebas.
  
  16/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our client is a reputed company in India manufacturing eyeglass lenses based on CR39 (allyl diglycol carbonate). On behalf of our client, we are looking for a UV curable hard coating which can be applied to CR 39 lenses by dip coating.
  
  Companies who can offer this kind of coating are requested to contact us with product details.We are preferably looking for a ready-to-use coating supplier. Technology transfer offers can also be considered. Leer más
D-283empresa anónima / Estados Unidos 1196

Envía tu propuesta>> Compartir demanda>>
Seeking: Sanitizing and disinfection methods that do not use UV, chemicals, or liquid

disinfection, non-chemical
- Resultado deseado
  
  This company is seeking a way to disinfect and sanitize hands and surfaces that does not depend on chemicals for bacteria kill, does not involve applying liquid, and does not use UV light. The method may be active (you apply it to your hands or the surface and it acts immediately) or passive (it works in the background to provide long-lasting effects over time).
  
  01/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  This company urges you to think broadly about new ways to sanitize and disinfect. They are looking for technologies that kill or remove microbes from a surface (hand or countertop, for example) without liquid and without leaving behind a chemical residue that achieves the kill. However, your solution can include ingredients that are applied and then totally removed; for example, a powder that attracts and holds microbes, and then is vacuumed or wiped away completely.
  
  Your solution may be a device that you wave over a countertop, or it may be a specially woven textile that attracts and removes microbes from the hand. If your solution is active, it should achieve its Log3 kill rate within seconds; if it is passive and long-lasting, it may build up to its kill rate over time and then maintain it.
  
  Your solution should be easy to use.
  
  CONSTRAINTS
  
  Log3 kill rate - 99.9% - in seconds
  
  Non-liquid.
  
  Not dependent on chemicals to achieve the microbial kill.
  
  Already on the market or close to market.
  
  Effectiveness data is required.
  
  POSSIBLE SOLUTION AREAS
  
  Electrical fields.
  
  Treated wipes that mechanically remove microbes.
  
  Infra-red light.
  
  Solar energy (for example, titanium dioxide undergoes a photocatalytic reaction that frees oxidants).
  
  Steam.
  
  Plasma.
  
  Field Of Use and Intended Application
  Home and commercial disinfection.
  
  Desired Outcome
  This company would like to find a general sanitizing and disinfecting solution that is not based on chemical kills, does not involve applying liquid, and does not depend on UV light. The solution may be active or passive, may apply to hands or surfaces or both, and be easy to use.
  
  Previously Attempted Solutions
  The company is not interested in UV wands or other methods involving UV light. Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-199empresa anónima / Estados Unidos 1320

Envía tu propuesta>> Compartir demanda>>
Seeking: Dielectric ink-jettable solder mask to cure in place using UV

solder mask, inkjet
- Resultado deseado
  
  We are seeking a solder mask that we can print using ink-jet technology.
  
  12/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  We would like to find a solder mask material that we can print with ink-jet technology. This would be essentially a dielectric ink. We would like to cure the "ink" in place after printing by using a UV lamp. Reflow conditions are 260 degrees C. At those temperatures, the dielectric ink we currently use turns brown and no longer functions properly.
  
  CONSTRAINTS
  
  o Dielectric ink/solder mask
  
  o Curable in-place using UV
  
  o Withstands reflow conditions of 260C
  
  o Viscosity and droplet size suitable for ink-jet technology
  
  POSSIBLE SOLUTION AREAS
  
  Semiconductor/printed circuit board industry
  
  Polymer chemistry
  Leer más
D-364PERSTORP / Suecia 1830

Envía tu propuesta>> Compartir demanda>>
Seeking how to stabilize a thiol-ene lacquer

Thiol-ene, stability
- Resultado deseado
  
  A UV curable lacquer consisting of a thiol functional compound and an ene functional compound has a limited shelf life. We are after a method or additive to stabilize the lacquer in the can for at least 6 months, while still retaining a high reactivity, when the lacquer is applied and exposed to UV light.
  
  31/05/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  DESIRED OUTCOME: An additive package that will prolong the stability in the can, without negatively influence the reactivity when applied and exposed to UV light.
  
  BACKGROUND: UV curable coatings and inks have grown very fast during the last 15-20 years due to it is an environmental friendly and cost effective technology. However, it has some inherent drawbacks e.g., not 100% conversion and shrinkage upon curing as it is made from acrylate functional monomers and oligomers. This will give poorer adhesion to many substrates. A UV curable thiol-ene based system can overcome these problems and has excellent mechanical properties, why it is of high interest to get a well working system. The system is normally made from a thiol or mixture of thiols for example trimethylolpropane-tri-mercaptopropionate and an ene or mixture of ene compounds, for example acrylate or allyl ether functional oligomers. The composition contains also a UV initiator and potential flow and surface active additives, fillers etc. The drawbacks with thiol-ene have been smell and poor pot-life, that is poor stability in the can, due to premature reaction. Today the smell is considerable lower and the main issue to solve is the stability.
  
  EHS REQUIREMENTS: The solution shall not include any substance that is toxic, carcinogenic, mutagenic or repro-toxic. REACH registered compounds are preferred.
  
  COMMERCIAL REQUIREMENTS: The solution must be an economical solution. Leer más
D-159empresa anónima / Estados Unidos 1211

Envía tu propuesta>> Compartir demanda>>
Colourless Anti-Reflective and Ultraviolet Blocking Coating at Low Cost

anti-reflective, coating, ultraviolet
- Resultado deseado
  
  This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs.
  
  21/07/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs. The key challenge with existing combined AR/UV coatings is the non colourless appearance that results from the two UV and AR layers, hence a third layer of coating is added on top to compensate for the colouring. This makes the process capital intensive and increases the expense significantly. Ideally a solution would be a two layer based AR/UV coating or a completely new system. Alternatively a UV coated glass that can withstand high temperatures and resist damage during the AR layer curing process would also be of interest.
  
  The combined functionality coating can be organic or inorganic or a combination of both.
  
  The coatings need to be applied successfully to glass substrates and fulfill the following technical requirements:
  
  o UV blocking in wavelength region 300-380nm
  
  o High AR transmission - Mean transmission in region 425-675nm:
  
  o Low reflection in region 425-675nm
  
  o The coating needs to be optically transparent. Transmission color: neutral/colorless
  
  o Scratch resistant; cleanable
  
  o Coating should be resistant to high temp: 400C and above
  
  Field Of Use and Intended Application
  The wet coating technology will be applied on glass.
  
  Desired Outcome
  Successful technologies will be able to be applied in a wet form to glass, have combined AR and UV functionality as per required parameters, with no tint in the end coating.
  
  Comments
  This company is looking for coating technologies that offer the combined AR/UV functionality at low cost. They are open to a variety of solutions.
  
  Leer más
D-513empresa anónima / Reino Unido 1471

Envía tu propuesta>> Compartir demanda>>
Buscamos dispositivos innovadores / aparatos de mano para reemplazar los productos químicos utilizados en el lavado y peinado del cabello humano (o fibras naturales, proteínas, etc)

healthy scalp/hair, haor care devices
- Resultado deseado
  
  Estamos trabajando con un fabricante líder de dispositivos para el cuidado personal que está en búsqueda de tecnologías realmente innovadoras y productos para obtener un cabello más sano y "well styled". Estamos interesados en solución basadas en dispositivos que sustituyan los actuales productos de uso tópico, que cumplan una o más de las siguientes categorías para su uso en un entorno doméstico, el hogar.
  
  12/05/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Prepare:- Technologies that cleanse, nourish and stimulate the scalp, to enhance healthy hair growth from the root
  
  Repair:- Technologies that bring real sustainable repair to the inner and outer structure of the hair, thereby making it appear shiny, thick and bouncy without frizz
  
  Style:- Technologies that produce longer-lasting styles/shape to hair fibres, and hence styles with improved protection against changes in external conditions (humidity, UV, heat etc)
  
  We are interested in appliances, delivering a proven technique/science or a combination of appliance plus a topical consumable. We are NOT interested in chemical solutions alone.
  We are also particularly keen to review solutions from outside the personal care industry, for example, modifying proteins, processing fibres, adding value to textiles, etc
  
  Hand-held / portable devices to achieve the following:-
  
  • Stimulate hair growth from the root (i.e. via enhanced blood flow, follicle nourishing)
  • Deeply cleanse the skin and hair follicles of the scalp
  • Restructure the bonds in hair to achieve better results and longer lasting styles
  • Neutralize static charge or other deleterious effects to reduce frizz
  • Offer similar or better end benefits over existing topical solutions
  
  Technology to allow the following:-
  
  • Modify existing hair-care devices to incorporate secondary treatment
  • Device-driven delivery of materials that enter and effect hair fiber’s inner structure, or otherwise influence it to create shape, strength and elasticity
  • Application of coatings to cover a fiber’s outer structure and provide protection from UV rays and create shine
  • Adaption of professional hair treatments for consumer environments
  • Device activated use of topical treatments / cosmetics
  • Use of innovative physics to achieve structural change in physical fibers / hairs / textiles
  
  The key criteria to be met by the opportunity are:-
  
  • Device-based
  • Proven feasibility in terms of prototypes, consumer testing and scientific studies vs existing solutions
  • Relevant innovative value to the consumer
  • Solution fitting existing consumer behavior of product usage and daily hair care routine
  • Solutions that can be sold in the range € 10-500 (dependent on the benefit it brings)
  
  The client company is a leader in innovative design and branding of products and is able to offer any potential partner the benefit of extensive marketing and cost-effective manufacturing. We are willing to explore any reasonable commercial arrangements, including licensing in, strategic alliances, partnering arrangements or even outright acquisition.
  Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-702empresa anónima / China 1395

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnología y equipamiento para reducir la pérdida de almacenamiento de las patatas

Potatoes, Tubas, UV, Ozone, Storage, processing, agriculture,
- Resultado deseado
  
  Buscamos tecnologías innovadoras y equipos para superar el problema "potato loss" durante el almacenamiento, mediante la mejora de la calidad del material de plantación (semillas de patata), aumentando la productividad y minimizando la pérdida de almacenamiento. Tecnologías que reduzcan el gasto energético y otros costes relacionados con el tratamiento y el almacenamiento de las patatas son también de interés.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Although the potato is one of the most widely grown and consumed vegetables in the world, conventional storage is fraught with problems caused in the main by microbial infections and weight loss. Improved crop yields, storage and crop safety are key problems of modern agriculture which to date would appear not to have been fully solved. For example, in a tiny country such as Switzerland (with 7.8 million inhabitants), some 400,000 tonnes of potatoes are processed annually, and about 5.5% are lost during conventional storage. This is equivalent to 22,000 tonnes of potatoes, equating to about € 8,222,439 worth of potatoes lost each year. In some parts of the world it is quite possible that upto 50% of potatoes stored are lost over a period of six months.
  
  It is hoped that solutions can be found and that collaboration of various kinds could be entered into including, Distribution, local Joint-manufacture and sales, or Technology Transfer. Leer más
D-619empresa anónima / Reino Unido 1074

Envía tu propuesta>> Compartir demanda>>
Buscamos modulación duradera y mejorada de fibras de proteína

Novel keratin property modifying fibre actives, Protein chemistry routes, device (infrared, UV, heat
- Resultado deseado
  
  Nuevas tecnologías que proporcionen "longer lasting shape change benefits" en fibras de queratina. Soluciones inspiradas en la naturaleza o que se derivan de fuentes naturales son muy pertinentes.
  
  Buscamos nuevas tecnologías que mejoren y proporcionar cambios prolongados en la forma de fibras de queratina. Tecnologías que proporcionan efectos más prolongados por modificación química de la fibra de queratina y "cross linking properties" son de gran interés.
  
  17/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Providing more effective and longer lasting shape changes (e.g straight, curly/wavy) to keratin based hair fibres is a growing consumer requirement. Current technologies either do not provide longer lasting benefits or require harmful chemical actives such as formaldehydes etc. There are a number of other thiol, aldehyde or bisulphite based technologies that can alter the keratin fibre properties, but these too have other undesirable effects, such as malodour, fibre damage and are not optimal technology solutions. We seek new technologies that will alter the Keratin fibre properties and/or allow the formation of new cross links or manipulate disulphide bonds to provide longer lasting shape change benefits.
  
  Leer más
D-528GS AUTO INTERNATIONAL LTD / India 1659

Envía tu propuesta>> Compartir demanda>>
Buscamos proyectos/propuestas innovadoras con aplicacion en la industria de la automoción y el transporte

licensing, Automotive, product, technology, transportation, disruptive, vehicle, metals, materials,
- Resultado deseado
  
  Las propuestas deben tener aplicación en la industria de la automoción y del transporte. Tienen que ser respetuosas con el medio ambiente y probadas. Puesto que será un producto OEM, el potencial de aplicación debe ser en automóviles, camiones ligeros, autobuses, ferrocarriles, etc.
  
  22/05/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The product and technology can have wider application in other industries also. The areas can be suspension systems, brake systems, Cast iron, aluminum or other materials with unique properties. As the trend in the automotive industry is towards light weighting so as to be fuel efficient, so the product has to meet that criteria also. The process technology has to be environment friendly as well as energy efficient. Since it will be an OEM product, the application potential should be in cars. light trucks, SUV, medium to heavy duty truck, buses, railways etc.
  
  The licensing partner should be already supplier to the leading Europeon, American or Japanese vehicle manufacturers whether as Tier 1 or Tier 2. Exclusivity of license is also desired
  
  Leer más
D-433empresa anónima / España 3441

Envía tu propuesta>> Compartir demanda>>
Buscamos compuestos químicos foto reactivos para polimerizar fibras cuando estas son expuestas a luz de una determinada longitud de onda

fiber coating, photoreactive, shape memory, water resistant, heat resistant
- Resultado deseado
  
  We are looking for a Raw Material that can be mixed with other materials during a production process or for a finished product ready to be used as such. Ideally, a Raw Material supplier has a chemical compound of these properties to offer. If not, we will also be open to 1) get a license agreement, 2) acquire the product technology and/or 3) initiate a Joint Development.
  
  18/10/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos en busca de una materia prima que puede ser mezclada con otros materiales durante un proceso de producción o de un producto terminado listo para ser utilizado como tal. Idealmente, un proveedor de materia prima tiene un compuesto químico de estas propiedades para ofrecer. Si no, también estamos abiertos a: 1) conseguir un acuerdo de licencia, 2) adquirir la tecnología del producto y / o 3) iniciar un desarrollo conjunto Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-281empresa anónima / Estados Unidos 1188

Envía tu propuesta>> Compartir demanda>>
Seeking: Cheap, effective water treatment system to enable the use - re-use of dirty waste wate

dirty water, treatment, reuse,
- Resultado deseado
  
  This organization needs a way to render dirty water clean enough to use for washing or sanitary purposes. The method must be effective, low cost, and not require power.
  
  The dirty or waste water may contain a variety of contaminants that need to be removed. Issues this organization has identified and would like to be able to tackle in particular are:
  
  o Reduce/remove dirt particles in the water to reduce turbidity <5NTU
  
  o Remove surfactants (particularly Linear alkylbenzene sulphonate (LA
  
  01/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Clean water for drinking and washing is in short supply in most of the world. Besides hydration (a critical world-wide need), water is necessary for washing and sanitary needs.
  
  When clothes are washed in a bucket or small tub that contains a minimal amount of water, the wash and rinse water rapidly become burdened with dirt and soap. This organization would like to find a way to remove the dirt and surfactants from the used water -- cheaply -- thus effectively multiplying the clean water for use in rinsing. Ideally, your water-cleaning method could make dirty water potable.
  
  A typical first rinse laundry water contains a surfactant concentration of 0.1-0.2 g per L, a turbidity of ~300 NTU and a pH of ~9. Typical surfactants are anionic surfactants such as linear alkylbenzene sulphonates and non-ionic surfactants such as, ethoxylated alcohols.
  
  CONSTRAINTS
  
  o Your solution should present no safety or eco-toxicity issues.
  
  o The solution should not be a powered device.
  
  o Time constraints: Your solution should clean up ~10 L of water in about 2 minutes
  
  o Easy to clean and maintain. A technical solution that requires a great deal of water to clean would not be satisfactory.
  
  o The target market is exceptionally cost-sensitive in terms of initial equipment acquisition, and in operation, maintenance, and upkeep.
  
  POSSIBLE SOLUTION AREAS
  
  A number of solutions exist for waste water treatment and purification. If any can be used within the cost, power and volume constraints they would be of interest.
  
  Potential technology solution areas
  
  o Absorbants (activated carbon, silica gel), antifoams
  
  o Filtration/separation/sieves/membranes
  
  o Coagulation/flocculation
  
  o Aeration
  
  o Chemical
  
  o UV
  
  Field Of Use and Intended Application
  Washing water in rural and clean-water-poor areas of the world.
  
  Desired Outcome
  Ideally, you will provide a method or device that can reduce water turbidity, remove surfactants (predominantly LAS surfactants), render the water a neutral pH, and clean about 10L of water in about 2 minutes.
  
  Previously Attempted Solutions
  The current method uses flocculation. This clumps together fine particles using flocculants, thus improving filterability of the particles. It is a method used in water purification plants and sewage treatment.
  
  Comments
  This company is open to a wide variety of deals and is able to support early stage joint development work.
  
  Leer más
D-731empresa anónima / Reino Unido 4255

Envía tu propuesta>> Compartir demanda>>
Buscando nuevo químico para atacar selectivamente la capa de película de los materiales señalados de autoadhesivas (vinilo, polipropileno o polietileno) para químicamente "cortar" las formas elegidas

vinyl cutting, self adhesive signage, cost effective laser cutting
- Resultado deseado
  
  We are seeking a fluid, or enabling chemistry which can selectively attack the film layer of self-adhesive signage materials to chemically ‘cut’ the chosen shapes. Such a solution could be applied by current thermal or piezo inkjet technologies, allowing an alternative to current mechanical solutions.
  
  28/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando un fluido, o habilitador químico que pueda atacar selectivamente la capa de película del material autoadhesivo señalado para químicamente "cortar" las formas elegidas. Tal solución podría ser aplicada por las actuales tecnologías de inyección de tinta térmica o piezoeléctrica, lo que permite una alternativa a las actuales soluciones mecánicas. Leer más

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en UV : Oportunidades ... | Demandas

Innovación en UV : Oportunidades ... | Demandas

UV filters, ultraviolet filters, UV absorbers, cosmetic, cosmetics, sun care formulation, dermatology, skin, cream, lotion

We are seeking for UV absorbers from natural origin. Our main intention is to reduce the use of chemical filters with the aim of reducing the toxicity that cause the use of this kind of products. It's important that they could be formulated in a cosmetic product

Estamos en busca de absorbentes de UV de origen natural. Nuestra intención principal es reducir el uso de filtros químicos con el objetivo de reducir la toxicidad que causa el uso de este tipo de productos. Es importante que se pueda formular en un producto cosmético Leer más

primer, body filler, UV cured

CR39, coating

El recubrimiento debe tener una buena adherencia, claridad y propiedades de resistencia a los arañazos. Debe pasar los tests de corte transversal y de lana de acero. El recubrimiento será sometido a los tests de agua hirviendo y de inmersión en agua salada. Debe superar todas estas pruebas.

disinfection, non-chemical

solder mask, inkjet

We are seeking a solder mask that we can print using ink-jet technology.

Thiol-ene, stability

anti-reflective, coating, ultraviolet

This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs.

healthy scalp/hair, haor care devices

Potatoes, Tubas, UV, Ozone, Storage, processing, agriculture,

Novel keratin property modifying fibre actives, Protein chemistry routes, device (infrared, UV, heat

licensing, Automotive, product, technology, transportation, disruptive, vehicle, metals, materials,

Las propuestas deben tener aplicación en la industria de la automoción y del transporte. Tienen que ser respetuosas con el medio ambiente y probadas. Puesto que será un producto OEM, el potencial de aplicación debe ser en automóviles, camiones ligeros, autobuses, ferrocarriles, etc.

fiber coating, photoreactive, shape memory, water resistant, heat resistant

dirty water, treatment, reuse,

vinyl cutting, self adhesive signage, cost effective laser cutting

Usuario nuevo (registro gratuito)

Usuario registrado