Innovación en Water drying : Oportunidades ...

1 2 3 4

D-11empresa anónima / España 929

Envía tu propuesta>> Compartir demanda>>
Industrial softener with a perfume that is resistant to drying (60-70 ºC) and steaming.

Perfume, aroma, softener, tissue, chemical auxiliaries
- Resultado deseado
  
  We look for a perfume for the incorporation to an industrial softener so that the aroma in the softened tissue is kept after drying it at 60-70ºC and later steaming.
  
  30/07/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We look for a perfume for the incorporation to an industrial softener so that the aroma in the softened tissue is kept after drying it at 60-70ºC and later steaming.
  
  Tested perfumes do not resist the steaming and therefore, the aroma of the tissues disappear from them. The objective of the challenge is to get a perfume that resist to the drying and to the steaming.
  
  We test different perfumes (including a micro capsulate), even though we achieved resistance to drying, has not been possible that they remain after steaming, and as a consequence the aroma disappears completely. The addition of the perfume must be together with the softener (can be incorporated inside the formulation of the softener or applied in the softening bath in the moment of the application), but can not be added in the steaming water since the costumer has not an installation for doing so. Success criteria: to obtain a softened tissue with aroma after the drying and steaming industrial processes.
  Leer más
D-618empresa anónima / Brasil 1443

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías y enfoques para secar rápidamente varios objetos con diferentes formas, profundidades y superficies mojadas.

Drying Technology, Household Goods & Appliances, Water drying, evaporation
- Resultado deseado
  
  Una compañía global de bienes de consumo (FMCG), con oficinas en Brasil está buscando tecnologías y enfoques para secar rápidamente varios objetos con diferentes formas, profundidades y superficies mojadas. Esto debe llevarse a cabo a baja potencia (<0.5KW) y el menor coste. La compañía está buscando ingenieros de maquinaria innovadora que pueden estar en fase de desarrollo o que actualmente tienen otro uso, y están buscando la concesión de licencias o el desarrollo conjunto de contratos de investigación
  
  20/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  An international household cleaning products group with offices in Brazil is seeking technologies and approaches that enable the drying/removal of water form all facets of an irregular shaped hard surface. This is to be performed within an enclosed space to facilitate the rapid drying of items to provide at least 1 of the following benefits:
  
  • Faster drying
  • Low energy usage
  
  Technical Specifications / Specific technical requirements of the request
  Drying or removal of water from all sides of multi-faceted irregular shaped hard surfaced item contained within a sealed enclosed space in our particular application is particularly challenging due to the following:
  
  • The significant variety in the size, shape and surface complexity of the materials to be dried
  • The requirements to dry the entire surface in a very short time (minutes ideally)
  • The requirement to make a low cost, highly robust solution able to withstand daily use with little or no maintenance from the end user
  • The need to maintain a low total energy usage requirement (<0.5 kw)
  
  The solution should also meet the following requirements for incorporation into a consumer electrical product:
  
  1. Of sufficient robustness and simplicity to withstand daily use for > 3 years
  2. Able to work without significant maintenance or intervention required by the end user
  3. Not present a danger in use or hazard to the end consumer
  4. Ideally offer scope for patent protection with the desired application and format. Leer más
D-96empresa anónima / Australia 1048

Envía tu propuesta>> Compartir demanda>>
Water Polymer Technology

Molecular Science, microbial, Chemistry
- Resultado deseado
  
  I am looking for chemist who can help me to find the simple & cost effective way to manufacture better quality of water polymer in commercial scale. I will provide the sample of water polymer that are common in the market place.
  
  08/10/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The water polymer is an ecological product which delivers water to plants through microbes using the age old “thimbleful” concept; it is a non hazardous chemical product. It combines microbial activity with chemical technology. It utilizes molecular science and microbial interaction to control water release directly to plant roots as needed. It is a stagnant and non-volatile solid substance produced through solidifying water, causing fundamental changes in the physical properties of water. Once it contacts dry soil around the plants roots or drip zone, it slowly releases moisture through the common microbe in water polymer and all soil types.
  
  Most of water polymer/ crystals/ water retaining agents in the market place are high bibulous resins. Currently there are two major types of water retaining agents, acrylamide-acrylate cross-linking copolymer and starch-acrylate graft cross-linking co-polymer. Water retaining agents hold no water themselves. It absorbs water from outside and releases it to plants. In contrast, the one that I have as of sample is consist of 98% water and 2% cellulose. It releases water at a slow rate through microbial interaction in soil and provides moisture for plants. It does not evaporate in dry environments or flow or leak in sand. It reaches the roots of plants and releases moisture at a low rate, providing a slow but steady supply of moisture.
  
  Successful research partner will help me to find the simple & cost effective way to manufacture better quality of water polymer in commercial scale. Leer más
D-184empresa anónima / España 1091

Envía tu propuesta>> Compartir demanda>>
Hot water at once

Bathroom, Water, heat, faucet
- Resultado deseado
  
  Heat water at the point of consumption, that is washbasin faucet, shower head etc.
  Scope domestic bathrooms and kitchens
  Typical flow rate 6 to 12 l/min
  Temperature rise from ambient to 35-45º
  
  08/10/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Depending on the installation, water boilers are placed far from the bathroom of kitchen. This results in a waste of water because it is necessary to let cold water run until it reaches the desired temperature. This is a waste of resources, both water and energy.
  
  The available technology for this purpose nowadays is not energy efficient Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-256empresa anónima / Reino Unido 1131

Envía tu propuesta>> Compartir demanda>>
To reduce flavour volatile loss from food ingedients during microwave / hot air drying / cooking

Food, flavour, volatiles, ingredients, microwave
- Resultado deseado
  
  We are seeking ingredient and/or process technology to reduce the loss of flavour volatiles from ingredients in a snack food base during manufacture (drying / cooking). The snack food base contains fresh cooked potato with other ingredients such as vegetables, spices, herbs, legumes, dairy, non-meat protein. Whilst some cooked flavours are created in the cooking process through maillard type reactions, other flavour volatiles are lost (e.g. terpenes).
  
  30/07/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are URGENTLY seeking ingredient and/or process technology to reduce the loss of flavour volatiles from ingredients in a snack food base during manufacture (drying / cooking).
  Ingredients:
  The snack food base contains fresh cooked potato with other ingredients such as vegetables, spices, herbs, legumes, dairy, non-meat protein. Whilst some cooked flavours are created in the cooking process through maillard type reactions, other flavour volatiles are lost (e.g. terpenes). Examples of ingredients known to readily lose flavour volatiles include:-
  Delicate herbs (e.g. rosemary, thyme) Fragrant spices (e.g. lemongrass, cinnamon etc) Other volatiles may include Aldehydes, Alcohols, Esters, Ketones & Phenolics
  Processes:
  The freshly cooked potato is mashed and then blended with a combination of wet and dry ingredients, plus oil, into a fresh dough mixture that is shaped and deposited onto a conveyor belt. It then moves through the cooking processes:-
  1st stage - Atmospheric microwave dryer
  - Rapid dry at low temperature to create the texture of the product
  - Moisture content is reduced from 65-85% to ~15% moisture within 120 seconds
  - Monolayer of product on belt
  - Hot air (50C) blown across product to remove moisture generated by process
  - Product temperature is between 100-120C
  2nd stage - Hot air dryer
  - Hot air (~120C) dryer to complete cooking process
  - Moisture content further reduced from ~15% to 2% moisture content in around 20 minutes
  - Product deep bedded at 10cm depth
  
  Current causes of flavour volatile loss:
  The majority of flavour volatiles of relevance for a positive consumer experience are lost during the 1st stage of drying. Mechanisms of loss include:
  (i) co-distillation through steam generation (Hypothesis)
  (ii) heat degradation (e.g. flash-off at a certain temperature or time-temperature)
  
  Potential solutions
  - Rapid, on-line analytical methodologies which can identify and quantify the lost flavour volatiles,
  e.g. by sampling the oven exhaust streams online, and / or providing feedback control
  - Addition of ingredients (wet or dry) to the snack base at the “ingredient addition & mixing” step which directly or indirectly impact retention of flavour volatiles - process aid or declarable ingredient as long as not perceived as artificial
  o Can be sacrificial (i.e. not present or changed in finished product)
  o Can reduce reaction rates of volatile loss.
  We are searching for devices, methods, chemistry or physics relating to reduction of consumer-relevant flavour volatile loss during rapid dehydration of a potato-based composite snack.
  Leer más
D-334empresa anónima / Reino Unido 1796

Envía tu propuesta>> Compartir demanda>>
Innovative devices to reduce / monitor water consumption or to assist in recycling water

water saving, water monitoring, water recycling, taps / toilets / showers
- Resultado deseado
  
  Innovative technical devices to reduce water consumption or assist users in monitoring their consumption of water, for use with taps / faucets, showers, baths & toilets, in both domestic and commercial usage. Also new, inexpensive and innovative ways to help recycle water e.g. garden water (collection, storage, usage), hot water tanks, cyclinders, central heating systems, grey water recycling devices etc. Devices should be easy to fit by consumer or competent plumber, retro-fit or new fit.
  
  31/05/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The management of water consumption is becoming increasingly necessary as the global population grows and consumers in the developed world become compelled to reduce their environmental footprint. We are keen to find innovative technical devices to reduce water consumption, and have focused on applications where consumers use and therefore potentially waste the most amount of water. We are therefore searching for IP-supported, ideally DISRUPTIVE technology for the following markets:-
  
  - Domestic housing / consumer use
  - Public toilets
  - Hotel toilets / showers / baths
  - Schools / offices / social housing water consumption
  
  We are focused on gaining access to products that reduce water consumption, or assist users in monitoring their water consumption. These should be inexpensive devices to modify the following products:-
  
  - Taps / faucets
  - Showers / Baths
  - Toilets
  
  Additionally, we are also interested in new, inexpensive and innovative ways to help recycle water in some way, for example:-
  
  - Garden water (collection, storage, usage – plant watering, ponds, pools etc)
  - Hot water tanks / cylinders / central heating systems
  - Grey water / black water recycling systems / devices
  
  We are interested in products for both retro-fitting or new plumbing installations, but devices should be easily fitted by the consumer or a competent plumber. Complicated solutions requiring new plumbing formats are of lesser interest.
  Leer más
D-195empresa anónima / Estados Unidos 1111

Envía tu propuesta>> Compartir demanda>>
Seeking: Preventing growth of and removing microorganisms and biofilms from a potable water system

biofilm, biocide, Water
- Resultado deseado
  
  We want to decrease and maintain the microbial concentration in acceptably clean drinking water. We'd like to do this by preventing the growth of, or by killing, microorganisms in the water and microbial biofilms adhering to the surfaces of our sophisticated water storage and supply system.
  
  12/08/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  Potable water enters our storage and supply system from a municipal water source. Once in our water system, the bacterial concentration must be decreased and maintained at bacterial concentrations of less than 50 colony-forming units (CFU) per milliliter. We're not dealing with source water from unknown or untrusted sources. However, this water may need to be stored for as long as a year and may be consumed by people at any point during that time.
  
  Simple filtration of the water at the delivery point as it is delivered is not a good option, because the water system is not guaranteed to be sterile, and the bacteria count may increase over time while the water is stored. As high bacterial counts can overwhelm filtration and treatment systems, filters at the dispense point are also not considered a good option..Instead, we are looking for technology to decrease the number of living organisms below 50 CFU per milliliter and prevent further increases in microbial growth. We do not consider water safe to drink unless it contains 50 CFU or less per milliliter.
  
  While our system is complex, the evaluation of the technology will focus on the final potable water holding tank immediately prior to consumption.
  
  CONSTRAINTS
  
  There are two major constraints:
  
  o Your proposed solution must be compatible with a variety of metals including Inconel(TM), and stainless steel, along with a variety of other materials used for seals and tubing; and
  o Your proposed solution must be reliable enough that water quality would not need monitoring more than once per month. Water may need to remain unmonitored for six months or more.
  
  Additional constraints:
  
  o Low weight
  o A residual biocide is preferred
  o No toxicological effect resulting from long-term human exposure
  o No gas production from the operation of your technology
  o Must be compatible with a specific mixture of ambient gases that include primarily oxygen and nitrogen
  o Operable at ambient pressures from sea level (14.7 psi) down to 8 psi
  
  Leer más
D-176empresa anónima / Estados Unidos 998

Envía tu propuesta>> Compartir demanda>>
Seeking: Preventing growth of and removing microorganisms and biofilms from a potable water system

biocide, bacteria, Water, potable, purification
- Resultado deseado
  
  We want to decrease and maintain the microbial concentration in acceptably clean drinking water. We'd like to do this by preventing the growth of, or by killing, microorganisms in the water and microbial biofilms adhering to the surfaces of our sophisticated water storage and supply system.
  
  03/06/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  BACKGROUND
  
  Potable water enters our storage and supply system from a municipal water source. Once in our water system, the bacterial concentration must be decreased and maintained at bacterial concentrations of less than 50 colony-forming units (CFU) per milliliter. We're not dealing with source water from unknown or untrusted sources. However, this water may need to be stored for as long as a year and may be consumed by people at any point during that time.
  
  Simple filtration of the water at the delivery point as it is delivered is not a good option, because the water system is not guaranteed to be sterile, and the bacteria count may increase over time while the water is stored. As high bacterial counts can overwhelm filtration and treatment systems, filters at the dispense point are also not considered a good option..Instead, we are looking for technology to decrease the number of living organisms below 50 CFU per milliliter and prevent further increases in microbial growth. We do not consider water safe to drink unless it contains 50 CFU or less per milliliter.
  
  While our system is complex, the evaluation of the technology will focus on the final potable water holding tank immediately prior to consumption.
  
  CONSTRAINTS
  
  There are two major constraints:
  
  o Your proposed solution must be compatible with a variety of metals including Inconel(TM), and stainless steel, along with a variety of other materials used for seals and tubing; and
  o Your proposed solution must be reliable enough that water quality would not need monitoring more than once per month. Water may need to remain unmonitored for six months or more.
  
  Additional constraints:
  
  o Low weight
  o A residual biocide is preferred
  o No toxicological effect resulting from long-term human exposure
  o No gas production from the operation of your technology
  o Must be compatible with a specific mixture of ambient gases that include primarily oxygen and nitrogen
  o Operable at ambient pressures from sea level (14.7 psi) down to 8 psi
  
  Field Of Use and Intended Application
  Long-term human consumption.
  
  Desired Outcome
  We would like to find a substance that we can add to stored drinking water (or to the material of the storage system itself) that could substantially decrease bacterial concentrations and would prevent microbial growth and biofilm development. The output of the system would show no more than 50 CFU per milliliter.
  
  Previously Attempted Solutions
  Filters, iodine, hypochlorite, and silver biocides
  
  Comments
  The water consumed is the sole source for participants using the system. Consumption is estimated between 2 and 3 liters per day. Microorganisms previously identified in these systems primarily include Gram-negative organisms, such as pseudomonads, commonly associated with water systems.
  
  Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-281empresa anónima / Estados Unidos 1185

Envía tu propuesta>> Compartir demanda>>
Seeking: Cheap, effective water treatment system to enable the use - re-use of dirty waste wate

dirty water, treatment, reuse,
- Resultado deseado
  
  This organization needs a way to render dirty water clean enough to use for washing or sanitary purposes. The method must be effective, low cost, and not require power.
  
  The dirty or waste water may contain a variety of contaminants that need to be removed. Issues this organization has identified and would like to be able to tackle in particular are:
  
  o Reduce/remove dirt particles in the water to reduce turbidity <5NTU
  
  o Remove surfactants (particularly Linear alkylbenzene sulphonate (LA
  
  01/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Clean water for drinking and washing is in short supply in most of the world. Besides hydration (a critical world-wide need), water is necessary for washing and sanitary needs.
  
  When clothes are washed in a bucket or small tub that contains a minimal amount of water, the wash and rinse water rapidly become burdened with dirt and soap. This organization would like to find a way to remove the dirt and surfactants from the used water -- cheaply -- thus effectively multiplying the clean water for use in rinsing. Ideally, your water-cleaning method could make dirty water potable.
  
  A typical first rinse laundry water contains a surfactant concentration of 0.1-0.2 g per L, a turbidity of ~300 NTU and a pH of ~9. Typical surfactants are anionic surfactants such as linear alkylbenzene sulphonates and non-ionic surfactants such as, ethoxylated alcohols.
  
  CONSTRAINTS
  
  o Your solution should present no safety or eco-toxicity issues.
  
  o The solution should not be a powered device.
  
  o Time constraints: Your solution should clean up ~10 L of water in about 2 minutes
  
  o Easy to clean and maintain. A technical solution that requires a great deal of water to clean would not be satisfactory.
  
  o The target market is exceptionally cost-sensitive in terms of initial equipment acquisition, and in operation, maintenance, and upkeep.
  
  POSSIBLE SOLUTION AREAS
  
  A number of solutions exist for waste water treatment and purification. If any can be used within the cost, power and volume constraints they would be of interest.
  
  Potential technology solution areas
  
  o Absorbants (activated carbon, silica gel), antifoams
  
  o Filtration/separation/sieves/membranes
  
  o Coagulation/flocculation
  
  o Aeration
  
  o Chemical
  
  o UV
  
  Field Of Use and Intended Application
  Washing water in rural and clean-water-poor areas of the world.
  
  Desired Outcome
  Ideally, you will provide a method or device that can reduce water turbidity, remove surfactants (predominantly LAS surfactants), render the water a neutral pH, and clean about 10L of water in about 2 minutes.
  
  Previously Attempted Solutions
  The current method uses flocculation. This clumps together fine particles using flocculants, thus improving filterability of the particles. It is a method used in water purification plants and sewage treatment.
  
  Comments
  This company is open to a wide variety of deals and is able to support early stage joint development work.
  
  Leer más
D-221empresa anónima / España 1071

Envía tu propuesta>> Compartir demanda>>
Selective Release actives in water ambience

delivery system, laundry, advanced materials, smart polymers, selective release
- Resultado deseado
  
  A major consumer good manufacturer invites proposals for innovative delivering systems enabling the selective release of actives in water ambience, and more specifically, automatic laundry washing machines
  
  29/09/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The successful technology seeked will be:
  - very sensitive to water temperature: range of exposure 30-60C. The technology must guarantee: a) different response as a consequence of different temperature; b) The response is sharp and confined within a very small gradient of temperatures
  - compatible with laundry ambience: technology must sustain a very basic ambience. Ideally, material able to deploy a selective release, based on the chemical characteristics of the actives (enzymatic type, surfactant, bleach etc).
  - sensitive to physical characteristics of the active to release. The technology must act as a selective filter allowing the passage of molecules according to their size.
  IDEALLY also
  No dependence from external energy source: the release of actives is intrinsic to the composition of the advanced material and action is triggered by the ambience conditions (temperature water, chemical physical characteristics actives, and other mechanical mechanism independent from material).
  
  The technology must be able to deliver multiple dosages (mutiple washes). As a first approach it is considered European washing systems, and concentrated gels laundry detergents.
  
  POSSIBLE approaches might include, but are not limited to:
  -core/shell encapsulation technologies
  -advanced/smart polymers: polymers changing their chemical physics characteristics according to specific stimuli
  
  Approaches not of interest: technologies that are not compatible with water ambience.
  
  ANTICIPATED project phase or project plan:
  phase 1. proof of concept: demonstration of release profile using an active material identified by the client, evidence of acceptable loading rates, initial cost analysis
  
  phase2. product development: technology refinement with target actives, technology transfer to manufacturing, refined cost analysis
  
  phase3. commercialization
  
  APPROPRIATE responses to this requests:
  responses from companies, academic researchers, other research institutes, consultants or inventors are welcomed. Appropriate responses will address the following:
  -description of the technology
  -technical maturity of approach
  -availability of samples or technology demonstration
  -intellectual property situation (list any relevant patents or patent applications)
  -expertise of responder
  Leer más
D-472empresa anónima / España 2166

Envía tu propuesta>> Compartir demanda>>
Buscamos compuestos químicos o biológicos con propiedades ópticas dependiendo de la concentración de parámetros de calidad del agua para control de aguas residuales o superficiales

optical, water quality
- Resultado deseado
  
  Compuestos químicos o biológicos que tengan propiedades ópticas (absorvancia, fluorescencia, color) en función de la concentración de los parámetros de calidad del agua (pH, amonio, nitratos, cloruros, fosfatos, DBO ...) para aplicaciones de control de calidad de agua potable y de aguas residuales.
  
  13/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We develop water analyser for water quality control, and we are studding the possibility of new parameters to measure using optical techniques. We have technology for optical measure and online analysers but we need the chemical or biological compounds with the optical properties. Leer más
D-574empresa anónima / Estados Unidos 1835

Envía tu propuesta>> Compartir demanda>>
Buscamos nuevas tecnologías para la elaboración de "oil-water food systems"

processing, oil-water, Food
- Resultado deseado
  
  Las soluciones proporcionadas deben aportar valor añadido en términos de sostenibilidad, mejora de la vida útil / caducidad, y / o mejora de los atributos del producto (sensación en la boca, textura, sabor, aspectos nutricionales, etc.). Las técnicas existentes de procesado de "oil-water systems" son de coste relativamente bajo, pero tienen una serie de inconvenientes que pueden superarse con cualquiera de los valores añadidos citados anteriormente.
  
  Gran empresa americana del sector gran consumo. Especializada en la elaboración de alimentos y bebidas - fabricante y distribuidor. Aproximadamente 100 plantas de fabricación en EE.UU y Europa. 25.000 empleados. Sólida inversión en I+D para impulsar la innovación
  
  01/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Seeking novel processing technologies for oil-water food systems in the areas of mixing, thermal processing, emulsification, dosing, aeration, and change over. Processing of oil-water system is primary focus, but would be open to technologies relative to waste stream recovery and utilization.
  
  Solutions should have potential for food applications even if that was not their original intent or purpose. Must have potential to pass US FDA approval/inspection and adhere to existing US food safety legislation. Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-800Indepth Water Services and Management Limited. / Kenia 1065

Envía tu propuesta>> Compartir demanda>>
Buscando innovaciones tecnológicas en el campo del tratamiento de aguas residuales y su reutilización.

water reuse, waste water treatment, wastewater treatment, WWT
- Resultado deseado
  
  Solution should be environmentally clean and green, should have a small foot print, consume little to no electrical energy, by products after treatment should be harmless to the environment, no consumables should be used in the system, no maintenance or service required.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  La solución debe ser ambientalmente limpia y verde, debe tener un tamaño pequeño, consumir poca o ninguna energía eléctrica, los productos de después del tratamiento deben ser inocuos para el medio ambiente, no se deben utilizar consumibles en el sistema, no debe haber necesidad de mantenimiento o servicio requerido. Leer más
D-333empresa anónima / Reino Unido 1521

Envía tu propuesta>> Compartir demanda>>
Walk-in bath design to allow the bather to both enter & exit the bath-tub whilst it is full of water

bath, reduced mobility, water handling,
- Resultado deseado
  
  A new walk-in bath design which allows the bather to both enter and exit the bath-tub whilst it is full of water. Any new design should provide for: A means to enter the bath, via a walk-in door (at floor level). Instant access to a full bath of water. Safe and easy to operate by the bather alone, i.e. not requiring assistance or supervision. Retail price close to current walk-in baths. Suitability for approval by Occupational Therapists. Fit within existing bath / walk-in bath foot space.
  
  31/05/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are seeking a new walk-in bath design which allows the bather to both enter and exit the bath-tub whilst it is full of water.
  
  Walk-in baths are typically used by the elderly, infirm or those with reduced mobility, to overcome the problems associated with having to climb into and out of a conventional bath-tub. Walk-in baths, as the name suggests, are accessed via a door in the side of the tub, to allow users to literally walk in and out of the bath. Unfortunately this means that the user has to enter the bath when empty, and then wait while the water fills up. Not only is there a risk of the water being too hot or too cold as it enters the bath, but the bather is exposed to the unpleasant / potentially unhealthy chilling environment as they wait for the bath to fill. In exiting the bath the situation is even worse as the bather is now wet and rapidly getting cold, as they wait for the water to drain out before being able to open the door and exit the bath.
  
  No walk-in bath is currently approved by Occupational Therapists, both for the reasons above, and that existing designs still have a small lip/step to enter the bath (so preventing some users from safely using it). We are therefore seeking a novel design to allow the user to enter and exit the bath easily, and to give the impression of entering a full bath of water.
  
  Any new design should provide for:
  • A means to enter the bath, via a walk-in door (at floor level)
  • Instant access to a full bath of water
  • Safe and easy to operate by the bather alone, i.e. not requiring assistance or supervision
  • Retail price close to current walk-in baths
  • Suitability for approval by Occupational Therapists
  • Fit within existing bath / walk-in bath foot-space
  
  Solutions not of interest:
  • Faster speed filling and draining as a replacement for entering a full bath (unless in conjunction with other design / technology)
  • Ladders, ramps, hoists or other means to gain access to the bath
  
  The following design solutions have been suggested, but to our knowledge do not exist commercially or do not fulfil all the requirements. However, we would be interested in individuals or groups who could provide further details on developed solutions, or alternative technologies:-
  o Separate reservoir / double skinned bath to hold bath water / allow instant draining
  o Built-in seat moving device to transport user into full bath
  o Powered drainage device to pump water out of bath
  Leer más
D-285empresa anónima / Reino Unido 1149

Envía tu propuesta>> Compartir demanda>>
Technology to allow production of aluminium food & beverage cans with little or no water

aluminium drawing & ironing, waterless systems, closed loop, non-toxic
- Resultado deseado
  
  We are searching for innovative technologies, systems, products and / or materials to allow aluminium food and beverage cans to be manufactured with less or no water requirement. A closed loop system with no toxic waste products would also be considered a significant improvement.
  
  30/11/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Background:
  The production of aluminium cans is capital intensive and involves numerous process steps, many of which require water and / or water-based lubricants, as a cooling agent, and in particular to wash away fines, lubricant residues, etc prior to protecting, coating, filling and sealing. Typically, 15 - 65 gallons of water are required per 1000 cans (differs between individual plants). Our client is looking to drastically reduce this usage by adopting new forming techniques, novel ‘washless’ or waterless lubrication and / or cooling materials or mechanisms, and closed loop systems whereby the water that is used can be cleaned for re-use in the plant.
  
  Problems:
  - The drawing and wall ironing process generates a great deal of heat / friction (aluminium is reduced from gauge of ~0.25mm to ~100microns), hence the need for cutting oil / lubricants and coolants.
  - The cans must be scrupulously clean prior to coating on both sides (to prevent corrosion and allow printing), hence a 4-stage washing process. This includes the use of etching chemicals such as HF.
  - If employing a closed loop system the resulting waste sludge is classified as hazardous due to the aluminium particulates / fines (up to 30 microns) and various chemicals involved in the production process. This is expensive to remove.
  - The manufacturing process uses a number of solvents and other hazardous chemicals which not only contaminate the waste stream but give off toxic emissions meaning the sites on which plants can be placed are restricted.
  
  Solutions:
  Potentially any technology that allows the production of cans without water, or with as little water as possible, will be considered, including:-
  - Alternative forming techniques, e.g. without lubrication / coolant
  - Improved die technology, e.g. coatings for dies / tooling to operate at lower temperatures
  - Alternative cooling systems / mechanisms, e.g. cooling surface of the dies
  - Novel lubrication systems, such as a combined lubricant and coating, which doesn’t need to be washed off, or is water soluble, or can be removed without water (solutions could include pre-coated aluminium and polymer laminates, etc)
  - Waterless or ‘washless’ cleaning systems
  - New coatings / lacquers with ‘cleaner’ chemical content and avoiding use of VOCs
  - Alternative ‘greener’ mechanisms for etching fines from surface of the can (HF is currently used)
  - Water treatment systems that reduce or remove the usage of chemical agents, as well as the aluminium residues, to render the waste non-hazardous and thus potentially recyclable.
  
  Our client does NOT currently use silicon in their production process due to difficulties with contamination – therefore, we prefer not to use a silicone based solution unless it can be shown to not be detrimental to other processes, or could be removed completely from the can / equipment.
  
  The client is an established manufacturer, well used to developing best practice for their production plants. There is an ongoing economic and environmental requirement to reduce the water usage of their plants, and therefore minimise the impact to the local area. Considerable work has already been done to reduce consumption, but the client is looking for step-change technology to create a plant of the future. They are keen to simplify the production process, remove hazardous chemicals and generally create a ‘clean’ process that minimises use of local resources. The company has in-house development capabilities and will consider most forms of commercial collaboration, including licensing, joint development and acquisition. Any technology should have the potential to be scaled for high volume processes Leer más
D-795Gruhn May Inc. / Estados Unidos 7244

Envía tu propuesta>> Compartir demanda>>
Seeking technology to rapidly de-water ( from saturated liquid to 5%-10% moisture) large quantities of wastewater sludge/grit using portable/transportable equipment.

wastewater, sewage, de-water, dewater
- Resultado deseado
  
  Seeking technology to rapidly de-water ( from saturated liquid to 5%-10% moisture) large quantities of wastewater sludge/grit using portable/transportable equipment. Must be energy efficient, environmentally sound and require minimal operational personnel.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Ideally the technology would be capable of processing 30 cu yds of solids per hour and handle flow rates of 1000-2000 gpm. Permeate/leachate would return to source, finished would be evacuated via conveyor or auger to an elevation sufficient to allow for direct loading into trucks. Leer más

Buscador de innovación destacado PANRICO SLU

Sobre PANRICO SLU

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-642empresa anónima / España 1832

Envía tu propuesta>> Compartir demanda>>
Buscamos un sustituto del ácido bórico que combine propiedades lubricantes / de deslizamiento y no oxidantes para formulaciones de tabletas para desinfectar el agua de piscinas

Lubricant, sliding, anti-adherent, symclosene, trichloroisocyanuric acid, tablets, compacting, non-oxidising.
- Resultado deseado
  
  Buscamos un sustituto del ácido bórico que combine propiedades lubricantes / de deslizamiento y no oxidantes para formulaciones de tabletas para desinfectar el agua de piscinas basado en de ácido tricloroisocianúrico o symclosene (CAS # 87-90-1), sulfato de aluminio (CAS # 10043-01-3), sulfato de cobre (CAS # 7758-98-7). También estamos a dispuestos a realizar un desarrollo conjunto.
  
  Somos un grupo multinacional dedicado al desarrollo de aplicaciones para el uso sostenible del agua. La compañía se especializa en soluciones para la conservación del agua, manejo, tratamiento y disfrute.
  
  27/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Seeking a replacement for boric acid which combines lubricant/sliding properties and non-oxidising properties for formulations of tablets for disinfecting the water of swimming pools based on trichloroisocyanuric acid or symclosene (CAS # 87-90-1); aluminium sulphate (CAS # 10043-01-3); copper sulphate (CAS # 7758-98-7).
  
  A lubricant/sliding/anti-adherent substance that should permit the compacting of tablets with the active ingredients trichloroisocyanuric acid or symclosene(CAS # 87-90-1), aluminium sulphate (CAS # 10043-01-3) and copper sulphate (CAS N# 7758-98-7) and/or confer the mixture with “non-oxidising” properties (according to Regulations CE A.17 and ONU O.1).
  
  To manufacture trichloroisocyanuric acid or symclosene tablets using compression machines, the substances are added to the mixtures in a feed hopper and compacted in the matrix which will give the shape and size of the tablet by means of pressure (punch).
  
  The type of machine used to manufacture the tablets is the following:
  
  20 g tablets: rotary
  200 – 250 g tablets: eccentric / rotary
  500 – 600 g blocks: hydraulic
  
  The substance should permit the tablet to exit (lubricant, sliding and anti-adhesive effect) from the matrix of the compression machine.
  
  In addition, the mixture must provide the mixture based on trichloroisocyanuric acid or symclosene (which is a “oxidising” substance) the “non-oxidising” property.
  
  Boric Acid is currently used, which is a substance which will be classified as an SVHC (substance of very high concern) according to the REACH Regulation – future inclusion in Annex XIV – This means that it will be necessary to request ECHA for an authorisation for “use” in order to continue using it. It is highly likely that some uses will be dismissed.
  Leer más
D-509TelLab / Irlanda 2110

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías de microfluidos para el análisis de la calidad del agua

water quality, microfluidic technology, pollution sources, lab on a chip, pollution detection
- Resultado deseado
  
  Estamos interesados en tecnologías de microfluidos para la detección de contaminantes en el agua. Nos anticipamos a utilizar esta tecnología en una amplia gama de aplicaciones para el control del agua. Por esta razón, la tecnología debería detectar contaminantes en agua potable hasta límites de potabilidad así como límites más altos, por ejemplo para aguas superficiales.
  
  07/02/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are interested in getting in contact with research groups developing this technology. We would like to see proof of concept and ideally a product prototype. We are in interested in the analysis of parameters that effect drinking quality, with a particular interest in the 48 parameters referred to in the drinking water directive. Leer más
D-469empresa anónima / Irlanda 3054

Envía tu propuesta>> Compartir demanda>>
Buscamos plataforma de microfluidos (reactivos químicos o enzimas) para la detección de coliformes fecales en agua potable

engineering, drinking water analysis, in-situ testing, novel methods, Enzymes, microfluidic, reagent
- Resultado deseado
  
  Estamos interesados en plataformas con reactivos químicos novedosos o métodos de detección mediante enzimas para detectar coliformes fecales. Los métodos de detección deben medir los coliformes fecales hasta los niveles establecidos por la Directiva sobre agua potable
  
  11/06/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  This technolgy will be used in a wide set of applications to improve the monitoring methods which we can provide to our clients. We are keen to learn about new novel detection methods for this parameter which can be used on a mobile platform for in-situ testing. Leer más
D-183empresa anónima / España 1104

Envía tu propuesta>> Compartir demanda>>
Kinetic faucet

Bathroom, faucet, electricity
- Resultado deseado
  
  We are searching technology to convert kinetic energy of water running through a faucet to electricity. Must be aplicable to a domestic environment and aimed to provide energy to other devices in the bathroom area, (i.e.: displays, sensors, courtesy lights, etc)
  
  08/10/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  It's becoming more and more common to use devices in the bathroom that require electricity. Not only hand driers ans shavers. but also the typical bathroom products include functions that require the use of electricty as well:
  - faucets, electronic sensors to run electrovalves for automatic opening/closing, consumption displays, temperature displays
  - shower toilets
  - mirrors with clocks, radios, etc.
  
  Water running may offer a good opportunity to create electricity if the technology is available for a domestic environment Leer más

Buscador de innovación destacado COPCISA

Sobre COPCISA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-485empresa anónima / España 1627

Envía tu propuesta>> Compartir demanda>>
Buscamos un nuevo dispositivo para sustituir las bandejas/desagues de ducha actuales

Bathroom, shower tray, water draining, odour prevention
- Resultado deseado
  
  Buscamos un nuevo dispositivo para sustituir la bandeja/desagüe actual de ducha, que proporcione una barrera efectiva al olor y que tenga una altura total máxima de 30 mm
  
  11/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The drain fitting solutions proposed should be suitable to be installed in domestic shower trays, be able to swallow a water flow of 20 l/min (at least) and be reliable in terms or resistance to the typical agents (soaps, hair-dyes, etc) existing in the bathroom environment as well as remain unaffected by the dirt (hair, etc) present in the shower tray area.
  
  The solutions should also provide an efficient odour barrier to prevent bad odours go back from the sewage system to the bathroom. The overall height of this device should not exceed 30mm in total.
  Even that the preferred request is "Supplier", also "joint development" or "product acquisition" could be welcome too.
  
  The traditional drain fittings are based in a water seal which according to the European Standards must be minimum 50mm to give an efficient and long lasting protection against bad odours backflow.
  
  Therefore, even the state-of-the-art products available nowadays have an overall height of 60-80 mm. This height is an inconvenient when trying to install a flush fitting shower tray because it has to be dug in the bathroom floor what sometimes is very difficult or imposible.
  
  Other systems avalibale nowadays that could give an equivalent performance and that are not based on the water seal have proved to be not reliable enough, so far.
  Leer más
D-482empresa anónima / Reino Unido 1829

Envía tu propuesta>> Compartir demanda>>
Se busca recubrimiento (conformal passivation coating) o tratamiento para "electroless nickel electrode component"

protective layer, nickel electrode, chemical barrier, organic solvents, water based fluids
- Resultado deseado
  
  La solución debe proporcionar una barrera eléctrica y química para proteger el electrodo de níquel electrolítico de los ataques corrosivos o de la acumulación de sólidos. El tratamiento de pasivación deben permanecer firmemente unido a niquelado después de la inmersión prolongada en disolventes orgánicos o líquidos aquosos
  
  10/03/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The protective layer should be firmly attached to the nickel and resistant to prolonged immersion in organic solvents, it would be an advantage if it was also effective in protecting against water based fluids.
  
  Operating temperatures in service up to >60C should be achievable with the treatment.
  Processing temperature should be low (<125C) and the treatment must be able to cope with complex substrate topography.
  
  Coating thickness should be <10micron)
  
  Coating must be electrically non-conductive Leer más
D-641empresa anónima / Brasil 1931

Envía tu propuesta>> Compartir demanda>>
Buscamos sustituto de STPP tripolifosfato de sodio

Phosphates free, detergents, cleaning, eco friendly, binders, hard water, Surfactants, sequestrants
- Resultado deseado
  
  Una compañía global está buscando sustitutos para los fosfatos que se utilizan actualmente en los detergentes domésticos para aumentar el rendimiento de limpieza y prevenir los efectos nocivos del agua dura.
  
  La solución debe proporcionar:
  
   La identidad de la solución tecnológica propuesta con especificaciones detalladas
   Los proveedores potenciales de los materiales y los costes indicativos si se conocen.
   Indicaciones de cualquier problemática relacionada con la formulación
   Disponibilidad de cantidades suficientes de muestras para el trabajo experimental.
   Capacidad de ser entregados en cantidades comerciales en enero de 2017.
  
  11/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Description:
  
  In Europe regulations restricting the use of phosphates and other phosphorus compounds in many consumer detergents are being adopted.
  
  The most widely used detergent phosphate is sodium tripolyphosphate (STPP), but various phosphates of sodium, potassium and other minerals are also used for specific applications. The reason why STPP is used in detergents is that it performs several very useful functions. Phosphates are able to soften water by deactivating water hardness minerals through sequestration (holding metal ions) or precipitation (removing metal ions from solution as insoluble materials). By binding the water hardening ions (Ca2+ and Mg2+) it prevents formation of filming and hard water deposits. An important functional property of phosphates is that they contribute to the overall detergency of a cleaner by providing and controlling alkalinity and preventing hard water interference with surfactants. Phosphates also exhibit a deflocculating property that helps to prevent formation of large particles of dirt which are easier to wash from the surface of substrates such as ceramics, glass and metal.
  
  Since phosphates fulfil a number of different functions; it may not necessarily be easy to replace them with a single ingredient formulated in the way STPP is currently used, however a single replacement solution for the problem would be preferred.
  
  Summary of Need /Scope of the Brief:
  
  To identify providers of alternative phosphate-free technology approaches for detergent applications that ideally have the potential for cost parity and performance parity with, for example, sodium tripolyphosphate.
  
  Providers are defined as:
  
  1. Universities with specific scale inhibition, or sequestering expertise,
  2. Startup and medium sized businesses
  
  Potential solutions from other industry sectors that can be adapted are also acceptable as are expert partners for collaborative work to design and synthesize custom chemistry that meet the criteria
  
  Detailed Technical Requirements:
  
  Provide alternative technology solutions to phosphate that may become cost parity and performance parity.
  
  The solution should provide:
  
   Identity of proposed technology solution with detailed specifications,
   Potential suppliers of materials and indicative costs if known.
   Indications of any formulation issues
   Availability of sufficient quantities of samples for experimental work.
   Should be able to be supplied at commercial quantities by January 2017.
  
  Magnetic, RF or electrochemical scale prevention devices are not in scope.
  
  Additional Information:
  
  1. Not be harmful for human use.
  2. Manufacturing process proposed should not be cost prohibitive
  3. Overall product cost appropriate for consumer use products
  4. Technology ideally to be REACH compliant
  5. Ideally offer scope for patent protection with the desired application and format if custom chemistry solution
  6. Have IP protection if a current product.
  7. Suitable for multiple formulation formats ( solids, powders, liquids, gels)
  Leer más
D-677empresa anónima / España 1285

Envía tu propuesta>> Compartir demanda>>
Buscamos soluciones reversibles de encapsulación con control de liberación inteligente

water-soluble, thermo sensible, reversible, activation, end of live,
- Resultado deseado
  
  Una empresa internacional con gran know how en "household products" está buscando soluciones de encapsulación con la posibilidad de liberar el ingrediente activo de una manera controlada.
  
  La empresa está interesada en la transferencia de tecnología, joint venture o cualquier otro acuerdo comercial para desarrollar y fabricar un producto de consumo para el mercado "Home Care Mass Market"
  
  23/01/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Although we don’t discard other type of solutions, we are interested mainly on:
  
  - Water-soluble.
  - Thermo sensible.
  - With activation time through luminal degradation, evaporation, humid, …
  - With EOL (End Of Live) indicator. Ie the last ones could have a different active ingredient color in order to indicate that the active ingredient is going to run out.
  - With reversible capacity. TO release or retain the active ingredient due the different external factors.
  
  Encapsulation reversible solutions with delivery smart control sensible to temperature, humidity, time, light, electric impulses, ph, air contact, voltage difference, …
  
  This should be a cost-competitive solution and mass producible at a final stage. The company requires evidences of the level of efficacy or proof of principles. The tech solutions and systems shall be under proprietary know how conditions or patent and/or exclusive license rights protection.
  Leer más

Buscador de innovación destacado Affinity Petcare

Sobre Affinity Petcare

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-689empresa anónima / España 1529

Envía tu propuesta>> Compartir demanda>>
Buscamos un método de medición rápida de las tasas de pulido de pintura "antifouling" (disminución del espesor dl recubrimiento )

coating, Antifouling, Test Method, polishing, Surface thickness, Solubility & Erosion, Rotating Drum
- Resultado deseado
  
  Empresa lider a nivel mundial en el mercado de recubrimientos de protección con centros de producción y de I + D en varios países. Estamos buscando métodos para acelerar el ensayo del pulido de revestimientos antiincrustantes.
  
  Las pinturas antiincrustantes se aplican sobre superficies que están sumergidas bajo el agua y una de sus características es que por la combinación de solubilidad y la tensión mecánica (erosión) el espesor del recubrimiento se reduce gradualmente con el tiempo (polishing). Habrá mediciones del espesor de recubrimiento total en el inicio y en intervalos de 2 semanas. Esta demanda se refiere principalmente a la aceleración del "polishing", el espesor total del recubrimiento y por lo tanto su disminución se puede medir con un método establecido. Estamos buscando un método rápido para determinar el pulido en un periodo de 6 semanas (disminución del espesor del recubrimiento).
  
  09/02/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The current method consists of painted surfaces on rotating drums immersed in sea water or artificial seawater. The testing is quite time extensive (several months) and costly. Possible solutions might include aging of the samples before immersion, higher temperature, and additives to the artificial seawater or totally different approaches not using rotating drums.
  
  The solution we are looking for should give results on the polishing in 6 weeks, testing could be done in an initial phase at the partner site. In the long run implementation of this test at the requester site would be preferred. The requester is a globally leading player in the protective coatings market with production and R&D sites on several countries.
  Leer más
D-704empresa anónima / Estados Unidos 3698

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías para aumentar la sensación cremosa en la boca en bebidas de base aceite/agua

emulsifiers, texturizers
- Resultado deseado
  
  Necesitamos tecnologías para aumentar la sensación "cremosa" en la boca en bebidas de base aceite/agua. Las soluciones deben proporcionar al consumidor una experiencia mejorada del producto. Las soluciones pueden ser ingredientes o procesos y deben ser aplicables con independencia del contenido de grasa.
  
  16/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Solutions should have potential for food applications even if that was not their original intent or purpose. Must have potential to pass FDA approval/inspection and adhere to US food safety legislation. Solutions should be applicable to both hot and cold products. Leer más
D-282empresa anónima / Estados Unidos 1221

Envía tu propuesta>> Compartir demanda>>
Methods that detect contaminants, microbes, or general cleanliness on hand and surfaces

contaminant, microbes, surface, hand
- Resultado deseado
  
  We are seeking methods that detect contaminants, microbes, or general cleanliness in the air, on hands, in water, on food, on surfaces, and in similar situations so that consumers and commercial users can clean more thoroughly and feel confident that they have eliminated the problem.
  
  01/02/11 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Most people take cleaning as a matter of faith. They wash, wipe, mop, and swab and assume that the apple, the countertop, the cup, the linoleum, and the sink are clean. They sniff the air and inspect the toilet. But they don?t actually know whether they've been successful. These concerns also affect commercial cleaners in hospitals, restaurants, and similar establishments.
  
  We want to find ways to know if cleaning has been successful (or if it's currently needed), and our interest goes beyond the countertop. For example, is there lead or mercury in the tap water? Is there mold, dander, pollen, or other allergens in the air? Are the dishes in the dishwasher fully sanitized? Is there salmonella, E. coli, staph, strep - or worse, MRSA or C. difficile - on a surface?
  
  Learning that contamination exists is part of the problem; confirming that it has been eliminated is the other. Solutions may range from simple color changes in a counter-wipe (it no longer turns purple and therefore microbes have been eliminated) through simple test kits, to a sniffer that constantly monitors the air and releases anti-contaminant ingredients when needed.
  
  Combined solutions that can both detect and eliminate contaminants are of high interest, for both home consumer and commercial applications. Your solution may be low-tech or high-tech, automatic or user-actuated. The solution should be fast, easy, and actionable - that is, it should provide its information quickly that contamination exists or has been eliminated; it should be easy to use; and it should indicate a condition that the user can remedy.
  
  CONSTRAINTS
  
  Fast, easy, and actionable: quick results, easy to use, a way to remedy the problem.
  
  Should have a consumables element.
  
  Cost is a consideration for products intended for consumer use.
  
  Close to market or currently on the market.
  
  POSSIBLE SOLUTION AREAS
  
  Tests that react to protein shells around microbes, molds, pollen
  
  Color-changing reactions for lead, mercury, other metals
  
  Tests that react to the presence of fluorine compounds
  
  Sniffers and air-sampling technology adaptable from HVAC and clean-room technologies.
  
  Field Of Use and Intended Application
  Home and commercial cleaning.
  
  Desired Outcome
  We’d like to find a range of simple, easy-to-use tests that help consumers and commercial cleaners know that their cleaning is successful.
  
  Leer más
D-723empresa anónima / Italia 3425

Envía tu propuesta>> Compartir demanda>>
Buscando un proceso innovador / formulación para incrustar fruta fresca en los productos de panadería blandos (pan / pasteles) con una vida de almacenamiento, en condiciones ambientales, de 45 días

Food, processing, formulation, water migration, edible films, FRUIT, Bread, Cakes
- Resultado deseado
  
  Fresh fruit pieces (no candied), mixed within the dough and oven cooked at 100°C must retain their structure over the process and over a shelf life, at ambient conditions, of 45 days: no or very limited water migration should occur from the fruit piece to the bread/cake crumb and vice versa.
  
  Manufacturer of consumer products, exporting in more than one hundred countries, about 7000 employees, 26 production facilities, with an annual turnover of about 4 billion euros
  
  17/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Las piezas de fruta fresca (no confitada), mezcladas dentro de la pasta y cocinadas a 100 ° C deben conservar su estructura durante el proceso y durante un tiempo de conservación, en condiciones ambientales, de 45 días. No deberia producirese o de forma muy limitada la migración de agua a partir de la fruta a la miga de pan / tarta, y viceversa. Leer más

Buscador de innovación destacado Orange R&D Spain

Sobre Orange R&D Spain

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-532empresa anónima / Estados Unidos 2774

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías geotérmicas de generación de electricidad

geothermal, electricity generation, efficiency, turbine
- Resultado deseado
  
  Buscamos soluciones en el área de generación de electricidad geotérmica. Nuestro rango de intereses es muy amplio e incluye a cualquier tecnología relacionada con la generación de electricidad a partir de energía geotérmica con la excepción de la perforación de pozos y la fractura de las tecnologías.
  
  Estaremos interesados en cualquier tecnología que aporte ventajas respecto al estado actual de la técnica en el campo de la generación de electricidad a partir de energía geotérmica. Estamos abiertos a varios tipos de colaboración desde desarrollos conjunto de tecnologías prometedoras hasta la adquisición de una licencia de una tecnología disponible existente.
  
  27/02/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Possible fields of interest are technologies are to increase efficiency in the power generation system, and improved water purification or treatement technologies. Retrofits of existing geothermal power plants are of particular interest, where improved turbine technology or alternative power cycles, could add value. In addition to efficiency gains, improvements could also offer higher reliability and/or lower maintenance costs. Leer más
D-826SelChem India / India 68

Envía tu propuesta>> Compartir demanda>>
Buscando tecnología / socio técnico de curado UV imprimación repintado automotriz y masilla para la fabricación y comercialización en la India.

primer, body filler, UV cured
- Resultado deseado
  
  Looking for easy to use, reliable, UV cured primer-surfacer & car-body filler offering same or better end properties as conventional products with added advantage in terms of faster drying/setting, energy saving, no pot-life issues, environmentally friendly etc.
  Should be easily adoptable by small and large garages without need for large investments or specialsed training for applicators. Application and curing methods should be easy to implement at the garage level.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Buscando un curado-UV imprimación-aparejo y auto-cuerpo de relleno, confiable, curado UV fácil de usar que ofrece iguales o mejores propiedades finales respecto a los productos convencionales con ventaja en términos de secado / ajuste, ahorro de energía, sin problemas de tiempo de empleo útil y respetuoso con el medio ambiente.
  Debe ser fácilmente adoptable por los pequeños y grandes garajes sin necesidad de grandes inversiones o especialidad de formación para los usuarios. Los métodos de aplicación y el curado deben ser fáciles de implementar a nivel de garaje. Leer más

1 2 3 4

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en Water drying : Oportunidades ... | Demandas

Innovación en Water drying : Oportunidades ... | Demandas

Perfume, aroma, softener, tissue, chemical auxiliaries

We look for a perfume for the incorporation to an industrial softener so that the aroma in the softened tissue is kept after drying it at 60-70ºC and later steaming.

Drying Technology, Household Goods & Appliances, Water drying, evaporation

Molecular Science, microbial, Chemistry

I am looking for chemist who can help me to find the simple & cost effective way to manufacture better quality of water polymer in commercial scale. I will provide the sample of water polymer that are common in the market place.

Bathroom, Water, heat, faucet

Heat water at the point of consumption, that is washbasin faucet, shower head etc. Scope domestic bathrooms and kitchens Typical flow rate 6 to 12 l/min Temperature rise from ambient to 35-45º

Food, flavour, volatiles, ingredients, microwave

water saving, water monitoring, water recycling, taps / toilets / showers

biofilm, biocide, Water

We want to decrease and maintain the microbial concentration in acceptably clean drinking water. We'd like to do this by preventing the growth of, or by killing, microorganisms in the water and microbial biofilms adhering to the surfaces of our sophisticated water storage and supply system.

biocide, bacteria, Water, potable, purification

We want to decrease and maintain the microbial concentration in acceptably clean drinking water. We'd like to do this by preventing the growth of, or by killing, microorganisms in the water and microbial biofilms adhering to the surfaces of our sophisticated water storage and supply system.

dirty water, treatment, reuse,

delivery system, laundry, advanced materials, smart polymers, selective release

A major consumer good manufacturer invites proposals for innovative delivering systems enabling the selective release of actives in water ambience, and more specifically, automatic laundry washing machines

optical, water quality

We develop water analyser for water quality control, and we are studding the possibility of new parameters to measure using optical techniques. We have technology for optical measure and online analysers but we need the chemical or biological compounds with the optical properties. Leer más

processing, oil-water, Food

water reuse, waste water treatment, wastewater treatment, WWT

Solution should be environmentally clean and green, should have a small foot print, consume little to no electrical energy, by products after treatment should be harmless to the environment, no consumables should be used in the system, no maintenance or service required.

bath, reduced mobility, water handling,

aluminium drawing & ironing, waterless systems, closed loop, non-toxic

We are searching for innovative technologies, systems, products and / or materials to allow aluminium food and beverage cans to be manufactured with less or no water requirement. A closed loop system with no toxic waste products would also be considered a significant improvement.

wastewater, sewage, de-water, dewater

Seeking technology to rapidly de-water ( from saturated liquid to 5%-10% moisture) large quantities of wastewater sludge/grit using portable/transportable equipment. Must be energy efficient, environmentally sound and require minimal operational personnel.

Ideally the technology would be capable of processing 30 cu yds of solids per hour and handle flow rates of 1000-2000 gpm. Permeate/leachate would return to source, finished would be evacuated via conveyor or auger to an elevation sufficient to allow for direct loading into trucks. Leer más

Lubricant, sliding, anti-adherent, symclosene, trichloroisocyanuric acid, tablets, compacting, non-oxidising.

water quality, microfluidic technology, pollution sources, lab on a chip, pollution detection

engineering, drinking water analysis, in-situ testing, novel methods, Enzymes, microfluidic, reagent

Estamos interesados en plataformas con reactivos químicos novedosos o métodos de detección mediante enzimas para detectar coliformes fecales. Los métodos de detección deben medir los coliformes fecales hasta los niveles establecidos por la Directiva sobre agua potable

This technolgy will be used in a wide set of applications to improve the monitoring methods which we can provide to our clients. We are keen to learn about new novel detection methods for this parameter which can be used on a mobile platform for in-situ testing. Leer más

Bathroom, faucet, electricity

We are searching technology to convert kinetic energy of water running through a faucet to electricity. Must be aplicable to a domestic environment and aimed to provide energy to other devices in the bathroom area, (i.e.: displays, sensors, courtesy lights, etc)

Bathroom, shower tray, water draining, odour prevention

Buscamos un nuevo dispositivo para sustituir la bandeja/desagüe actual de ducha, que proporcione una barrera efectiva al olor y que tenga una altura total máxima de 30 mm

protective layer, nickel electrode, chemical barrier, organic solvents, water based fluids

Phosphates free, detergents, cleaning, eco friendly, binders, hard water, Surfactants, sequestrants

water-soluble, thermo sensible, reversible, activation, end of live,

coating, Antifouling, Test Method, polishing, Surface thickness, Solubility & Erosion, Rotating Drum

emulsifiers, texturizers

Solutions should have potential for food applications even if that was not their original intent or purpose. Must have potential to pass FDA approval/inspection and adhere to US food safety legislation. Solutions should be applicable to both hot and cold products. Leer más

contaminant, microbes, surface, hand

We are seeking methods that detect contaminants, microbes, or general cleanliness in the air, on hands, in water, on food, on surfaces, and in similar situations so that consumers and commercial users can clean more thoroughly and feel confident that they have eliminated the problem.

Food, processing, formulation, water migration, edible films, FRUIT, Bread, Cakes

geothermal, electricity generation, efficiency, turbine

primer, body filler, UV cured

Usuario nuevo (registro gratuito)

Usuario registrado

Heat water at the point of consumption, that is washbasin faucet, shower head etc.
Scope domestic bathrooms and kitchens
Typical flow rate 6 to 12 l/min
Temperature rise from ambient to 35-45º