Innovación en tide power : Oportunidades ...

1 2

O-1020Atlanta Marketing Consultants / Estados Unidos 1119

Solicitar información>> Compartir tecnología>>
Hybrid Fuel Cell System With Smart Power Electronic Technology

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy
- Descripción de la oferta tecnológica :
  
  The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Key Advantages of GEI-X5 Power Solution include:
  
  • Independent of the hydrogen infrastructure and do not require pure hydrogen for electric power production (able to operate on any carbon based fuel including biogas)
  • Use locally available carbon based infrastructure fuels employing a fuel reforming system that is 50% smaller than traditional fuel reforming systems with a 30% increase in power density (kW/liter).
  • Results in a 40%+ reduction in fuel consumption with the GEI-X5 HTPEM vs. diesel electric generators
  • Reduces harmful CO2 greenhouse gas emissions by 80% as compared to diesel electric generators
  • Provides silent power generation and multi-fuel diversity (critical for military applications).
  • Leverages a Common Technological Infrastructure (CTI) allowing adaptable and reconfigurable electric power output across multiple application domainareas with a common fuel cell stack infrastructure.
  • Incorporates a proprietary bi-polar plate flow field design which increases power density for use with reformed fuels
  • Hybrid fuel cell system containing a lithium battery allowing for more efficiency than straight fuel cell systems
  • Scalable system enabling for a wide range of renewable energy applications
  • Compatibility and ability to enhance the performance of other power technologies such as solar, wind, etc...
  • One button start
  
  CUSTOMER PROBLEM (Prior To GEI)
  
  Fuel cells are a highly efficient, combustion-less, and virtually pollution free energy source which provide electricity to power a wide array of applications including buildings, electric grids, trucks and automobiles, emergency back-up systems, laptop computers, and numerous other consumer devices. In principle, a fuel cell is an electrochemical device that operates like a battery. However, unlike a battery, a fuel cell requires re-fueling, and not recharging. A fuel cell uses fuel — usually hydrogen extracted from natural gas, propane, or other carbon based fuels, and oxygen extracted from air — to produce electricity. Fuel cells will continue to produce energy in the form of electricity and heat as long as there is a constant fuel source. Hydrogen fuel cells work simply, have no moving parts, and operate silently with water and excess heat as the only by-products.
  
  GEI High Temperature PEM (HTPEM) fuel cells operate at 160-180C. The HTPEM higher operating temperatures allow the use of non-pure hydrogen as a fuel while maintaining the cost and expanding the application flexibility benefits of low temperature PEM fuel cells.
  
  The specific benefits include:
  
  1) More efficient use of thermal energy or by-product heat used in a combined heat and power application resulting in high system efficiencies;
  
  2) Reduction of balance-of-plant (BOP) components for cooling, water management and purification resulting in reduced maintenance and simpler operations and controls;
  
  3) When using reformed fuels rather than pure hydrogen, the result is increased tolerance to carbon monoxide (by a factor of 300) which can poison LTPEM systems. The ability to use non-pure hydrogen reduces the equipment and capital cost necessary to remove fuel impurities.
  
  The resulting triad of benefits listed above result in a simpler yet compact and robust design which requires no humidification with high fuel flexibility and lower cost, yielding significant competitive advantages for commercial HTPEM fuel cell power systems. When HTPEM's are integrated with fuel reforming technologies, the combined heat and power fuel processing system is very efficient, with a high power/weight ratio, and represents the optimum technology for on-board reforming of military JP8 diesel,synthetic fuels, and locally available infrastructure fuels. The GEI HTPEM power generation and fuel reforming technology represents the optimum balance between the cost and availability of low temperature PEM fuel cells, and the high temperature fuel impurity tolerance of much higher temperature (800C+) fuel cells.
  
  The result is a game changing power technology which out-performs solar, wind, geothermal, hydro-electric, coal, and other power solutions from a cost and an efficiency standpoint while also being able to enhance the performance of these power solutions.
  The GEI Hybrid fuel cell system(Combining a lithium battery and fuel cell) is also equipped with state of the art electronics (making it a smart system which is able to communicate real time for monitoring and adjustment purposes). Leer más
O-302Laser Consult Ltd. / Hungr 1274

Solicitar información>> Compartir tecnología>>
Intelligent wireless power management systems ( ®)

technology transfer, IP, technology offer, technology request, patent
- Descripción de la oferta tecnológica :
  
  Power management system called ® which can be used in medical applications. Intelligent energy management systems, as well as of the intelligent and implantable human diagnostic and therapeutic applications based on such systems.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Our partner, a Hungarian SME is involved in the research and development of intelligent energy management systems, as well as of the intelligent and implantable human diagnostic and therapeutic applications based on such systems. They developed such a power management system called ® which can be used in medical applications. They are looking for a license agreement.
  
  In our days, active implanted devices are becoming increasingly and more and more widely used in therapeutics. In addition to the most frequently used pacemakers, cardiac defibrillators, drug delivery devices, neuro-stimulators, retina implants, hearing aids, incontinence management devices, bone growth stimulators and other devices are applied in order to extend the patients’ lifetimes and improve their life conditions. In light of the ongoing rapid development of electronics and medicine, the number of such implanted devices can be expected to grow even further. As the implantation of such active devices is both costly and risky and, in case of certain applications, their uninterrupted operation is essential, electricity necessary for their operation must be supplied on the long run and in a reliable manner.
  
  Innovation of the product:
  
  The elements of the product family ® are systems that may be battery-fed, accumulator-fed, based on the principle of capacitive storage or operating with hybrid supply (the joint application of various energy supply and/or energy storage technologies), as the given applications may require. Our partner has also established product classes in order to implement the effective energy management of devices with differing levels of energy demand. These product classes constitute complex system technologies optimized to the conditions required by the devices/implants to be supplied both in structure and technological makeup. The services and characteristics of this product family are as follows:
  
  They provide the opportunity for effective, intelligent and wireless non-invasive power supply and recharging, thus increasing the intelligence/calculation capacity of the implants while maintaining their lifetime. All of these services are coupled with the very favorable condition that the application of the technology does not require any surgical or even ambulant intervention, as patients may recharge the systems at home on their own as well.
  
  They realize effective storage protection for the energy storage systems (accumulator, battery, capacity and hybrid) applied.
  
  They ensure the power supply of the units of differing energy demand of the systems supplied (the physiological monitoring and/or physiological data supply systems of intelligent implants).
  As a particularly important service, they also support the mobile telemetric diagnostic monitoring of the technological state of either the energy storage system applied or the system supplied.
  
  According to their energetic classification, the product classes established cover systems with various levels of daily energy consumption ranging from 2 mAh or less (such as a mobile implantable blood pressure measuring system, for example) to 1,500 mAh or even beyond (such as the mobile artificial heart systems, to mention an important application).
  
  Main advantages:
  
  • Mobile, wireless chargeability
  • Intelligent energy management
  • Miniature geometrical design
  • Adaptability to other intelligent implants, usability in medical instruments
  • Modular set-up
  • Clustered product group set-up
  
  Potential areas of use:
  
  • Typical application areas:
  • Wireless energy supply systems
  • RFID solutions, wireless communication systems
  
  Typical customers:
  
  • Industry
  • Healthcare
  • Transportation
  • ITC
  Leer más
O-1111CITCEA-UPC / España 963

Solicitar información>> Compartir tecnología>>
Nuevos parques eólicos basados en la operación de frecuencia variable con un solo convertidor de potencia

green technologies, environment, energy, Repowering, offshore, power converter, induction generators, turbines, power plant, wind, wind power, Wind farm
- Descripción de la oferta tecnológica :
  
  Se propone este novedoso diseño de planta eólica con el correspondiente procedimiento de control para plantas de energía eólica basado en un único convertidor de potencia que facilita la operación de frecuencia variable en una planta de energía o grupo de plantas basado en generadores de inducción. El concepto permite aumentar la fiabilidad del sistema, reduciendo el coste general de la instalación. Se buscan socios para desarrollar aún más el sistema y / o establecer acuerdos comerciales, junto con la cooperación técnica.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The proposed configuration can be used for a cluster or for an entire power plant. Also, the proposed structure is suitable to adapt installed fixed speed wind turbines, adding a back-to-back power converter to inject the power to the grid. Furthermore, other generation technologies, such as tidal, wave or hydro based on induction generators can adopt the proposed concept. The key advantages of the concept include:
  
  Reduced number of power converters
  Cost reduction
  Reliability, availability and maintainability improvement
  Robust system with and without communications
  Grid code compliance including fault ride-through
  Possibility of removing the wind turbine transformer
  Leer más
O-1152Power Electronics Systems Group at University Carlos III de Madrid / España 2

Solicitar información>> Compartir tecnología>>
Herramientas Cad para el diseño de sistemas electrónicos energéticos

Real Time Systems, equipment;Electronic engineering;Embedded Systems, Electronic circuits, components
- Descripción de la oferta tecnológica :
  
  El Power Electronics Systems Group de la Universidad Carlos III de Madrid ofrece su amplia experiencia y trayectoria en el desarrollo de herramientas CAD de alto valor añadido para el diseño de equipos y sistemas de electrónica. El grupo proporciona una amplia experiencia en el diseño y el modelado de convertidores de potencia, que incluye el modelado, etapas de análisis y selección de topología / arquitectura, tanto para los convertidores, así como para sistemas de energía con múltiples convertidores.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - The design problem is analyzed and solved with deep knowledge of the concepts involved.
  - Multiple designs comparatives and efficient filtering criteria.
  - The output results are presented in multiple graphic formats updated in real time.
  - High connectivity with commercial circuit simulators, which allows the user a fast, friendly interface for design validation.
  - Models generation based on measurements and sent telematically by the client.
  - Efficient generation of economical offers and reports. Leer más
O-1156University of Louisiana at Lafayette / Estados Unidos 475

Solicitar información>> Compartir tecnología>>
Bajo consumo de energía, flip-flop de alto rendimiento con un solo transistor registrado

transistor, flip, flop circuit, clocked
- Descripción de la oferta tecnológica :
  
  Los transistores de velocidad de reloj dentro de un flip-flop tienen actividad interruptor 100% y presentan una gran carga en la red de distribución de reloj. Si se puede reducir el número de transistores velocidad de reloj en un flip-flop, el árbol de reloj tendrá menos capacidad de carga y por lo tanto se reducirá la potencia consumida en la red de reloj. Esta invención proporciona una potencia, el rendimiento del circuito flip-flop bajo alta usando sólo un transistor de velocidad de reloj.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Power consumption is a major concern in modern processors. Processor clock systems, consisting of flip-flops and latches, consume a large amount of power in modern processors. If one can reduce the number of clocked transistors in a flip-flop, the clock tree will have less capacity load and hence reduce the power consumed in the clock network. This will further result in reducing the number and size of the clock driving buffers, which will in turn cause a significant reduction in the power consumption of the overall system. We have invented a single-transistor-clocked flip-flop that enables minimizing of redundant switching activity, reduction of glitches at the output node, and less power consumption than current flip-flop devices. Collectively, this technology provides a low power, high performance flip-flop circuit with significant potential to increase circuit and overall system reliability, efficiency and speed. Leer más
O-1015Rovira i Virgili University (URV) / España 571

Solicitar información>> Compartir tecnología>>
Detector de potencia y método para mejorar el margen de estabilidad de los convertidores de potencia de conmutación

switching power converter, power converters, voltage-sensing circuit, power management, energy management, battery, batteries, portable devices, energy harvesters, consumer electronics
- Descripción de la oferta tecnológica :
  
  Se han desarrollado y patentado una estructura de detección de voltaje para convertidores de potencia de conmutación y un método para mejorar el margen de estabilidad. Se buscan socios para desarrollar aún más el sistema y / o establecer acuerdos comerciales, junto con la cooperación técnica.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Innovative technique for controlling fast-scale instability based on narrowband amplifying the harmonic at the switching frequency. While prior art techniques were based on delay-cell-based complex circuits (and analysis), this technique is based on a simple circuit and it can be described and designed by means of a frequency domain analysis.
  
  Simple and compact circuit, easily implementable and on-chip amenable, that tackles the control of fast-scale instabilities while concurrently providing output power ripple reduction, thereby extending the design space to better fit typical specifications of on-chip switching power converters. The simplicity of the circuit compared to previous proposed topologies facilitates its potential implementation in an integrated power management IC. Leer más
O-206PREMO Group / España 1168

Solicitar información>> Compartir tecnología>>
UHF active tag for multiporpouse network (optimized for smart meetering)

Smart Meetering, lower power ad-hoc networks, UHF active tag, Fully Integrated RF Module
- Descripción de la oferta tecnológica :
  
  Witech MD868N25-1AS is a 868 MHz, narrow band 25 mW fully integrated (hardware/firmware) RF module specially suited for OEM integrators who wish a high optimized and completely designed RF platform with true low power and long range features, achieving the fastest time to market and the lowest development risk.
  
  The module includes a SMA-type RF Port for greater flexibility in antenna selection, according to the size and performance specifications. This narrow band solution is specially designed for applications requiring ultra-high sensitivity for extreme link-budget, like ultra low power ad-hoc networks with extensive coverage.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Witech MD868N25-1AS is a 868 MHz, narrow band 25 mW fully integrated (hardware/firmware) RF module specially suited for OEM integrators who wish a high optimized and completely designed RF platform with true low power and long range features, achieving the fastest time to market and the lowest development risk. The module includes a SMA-type RF Port for greater flexibility in antenna selection, according to the size and performance specifications. This narrow band solution is specially designed for applications requiring ultra-high sensitivity for extreme link-budget, like ultra low power ad-hoc networks with extensive coverage.
  
  GENERAL FEATURES
  
  - Fully integrated RF Module (Hardware/Firmware)
  - License Free 868 MHz ISM Band
  - Narrow Band for Extreme Link-Budget
  - Ultra Low Power Consumption
  - Long Range: 2000 m aprox. (line-of-sight)
  - Fastest Time to Market, Lowest Development Risk
  - Multiple I/O Interfaces and Assembly Options
  
  RF PERFORMANCE
  
  - Output Frequency Range: 862-870 MHz
  - Channel Spacing: 12.5, 25, 50 KHz
  - Output Power Range: -20 to 13 dBm
  - Antenna Port Connection: SMA Port 50 Ohms
  - Modulations: GFSK
  - Radio Data Rates: 0.1 to 25.0 Kbps
  - Sensitivity (BER < 0,0001) - 130 dBm (0.1 Kbps) - 121 dBm (1.0 Kbps) - 114 dBm (9.6 Kbps) - 113 dBm (25.0 Kbps)
  - Frequency Stability 2.5 ppm (Temp Compensated)
  - Compliant with ETSI EN 300 220 Standard Leer más
O-1013Spanish National Research Council (CSIC) / España 714

Solicitar información>> Compartir tecnología>>
Nuevo enchufe inteligente para aplicaciones domésticas e industriales.

smart socket, electric grids, domestic electric grids, industrial electric grids, electric power, domestic appliances, industrial appliances, electrical devices, electric engineers, electric engineering
- Descripción de la oferta tecnológica :
  
  Ha sido patentado un nuevo enchufe inteligente para uso en redes eléctricas domésticas e industriales. Promueve la eficiencia del suministro de energía eléctrica a los aparatos domésticos e industriales. Se buscan socios industriales que trabajen principalmente en la fabricación de aparatos eléctricos de bajo consumo de energía para colaborar en la implementación de esta tecnología, y explotar el know-how existente a través de un acuerdo de licencia de patente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Improves the concept of smart metering by initiating actions to control of energy from the measurement data and consumption.
  - Allows selecting the best power source of a diverse group of energy sources as: wind, solar, electromagnetic.
  - Promotes the energy efficiency in the supply to domestic and industrial appliances.
  - Reduce the energetic demands from the most expensive electric sources, both for domestic and industrial applications.
  - Optimizes the autonomy of each appliance connected to the electrical system of the user.
  - Allows independent control and management of individual outlets.
  - Provides electrical power to the appliances connected to multiple power grids.
  Leer más
O-910Rovira i Virgili University (URV) / España 844

Solicitar información>> Compartir tecnología>>
Nuevo procesador para rastrear el punto de máxima potencia en aplicaciones PV

photovoltaic, solar power, solar generator, solar panels, renewable energies, renewable power, solar plants, MPPT, PV, ESC, power electronics, grid-connected generator
- Descripción de la oferta tecnológica :
  
  La invención propuesta consiste en la adición de un nuevo bloque, llamado Unidad de fase del proceso (PPU) con el fin de mejorar los sistemas basados en el control MPPT extremum (ESC). La PPU permite sincronizar las señales de entrada y de salida de difuminado utilizadas en ESC. Esta sincronización da como resultado un seguimiento más preciso y rápido del punto de máxima potencia.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Seeking frequencies in MPPT circuits for PV systems are bounded by the dynamic bandwidth of DC-DC converter and filter subsystems that delays processed dithering signals. The innovation consist in equalize the dithering signal phases to overcome this bound. The equalization is carried out in the PPU by means of the evaluation of DC-DC converter and filter transfer functions. In this manner, the MPPT becomes faster and more accurate. Leer más
O-8Advancare, SL / España 1220

Solicitar información>> Compartir tecnología>>
Low Power Wireless Sensors Networks

Electronics, electromedicine, processing, pervasive, signal
- Descripción de la oferta tecnológica :
  
  A wireless sensor network based on multiple microdevices that include any sensor needed to measure what we would like (movement, temperature, humidity, flow, fluid density, electrocardiography,...), a microprocessor, and are capable to communicate wireless in real time.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  A wireless sensor network is based on multiple microdevices that include any sensor needed to measure what we would like (movement, temperature, humidity, flow, fluid density, electrocardiography,...), a microprocessor, and are capable to communicate wireless in real time.
  
  This technology can apply to many sectors, from measuring the environmental conditions to improve the growth of commercial vegetables, to measure process variables in an industrial facility, or to detect when a person falls down in an old people residence. These are just examples, the technology can be custom tailored to each concrete need.
  
  These microdevices create an ad-hoc network, which means that they recognize themselves with the others and are able to communicate with any other device, and in case one of this devices is taken out of the network, they will rearrange it immediately to continue with a fluent communication. This a very important reason to make this technology very suitable for rough and changing environments.
  
  Depending on the transmission needs, the battery life ranges from days to years, being common a battery time before recharging or changing in the range of months. The size of the device is the same as an SD card.
  
  The captured data is finally directed to one of these microdevices connected to a computer or any other device that store and explodes the collected data. Many solutions are possible for that.
  Leer más
O-1004University of Seville / España 985

Solicitar información>> Compartir tecnología>>
Método de control del equilibrio de tensión en convertidores multinivel

multilevel converters, voltage balance control, electric energy conversion, electric energy, electricity, Electromagnetic, electrochemicals, energy storage, renewable energies, electric motors, electric engineers, electric engineering
- Descripción de la oferta tecnológica :
  
  Los convertidores de potencia son sistemas electrónicos capaces de alterar las características de tensión y corriente que reciben. Con esta invención, las dificultades encontradas con convertidores multinivel en equilibrar correctamente la tensión del bus continuo condensador se solucionan a través de una aplicación sencilla y económica de un algoritmo de equilibrio de control de tensión.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This novel invention is based on a converter voltage balance control algorithm for the bus, a main problem found in multilevel converters. The invention consequently opens more channels for the commercial success of these converters as well as providing a more economical solution given that it does not require additional circuitry (hardware) and it has greater simplicity in computational implementation. The invention could benfit the environmental industry and could also generally benefit all production sectors related to electric energy conversion. Leer más
O-763University of La Laguna / España 1726

Solicitar información>> Compartir tecnología>>
Sistema para generar energía a partir de la dinámica marina

renewable energy, tide energy, tide power, marine dynamics
- Descripción de la oferta tecnológica :
  
  La invención se refiere a un sistema que genera energía a partir de la dinámica marina por medio de la compresión del aire contenido en el interior de tubos conductores y turbinas, a través de una unidad con una geometría esférica en la superficie con varios agujeros, capturando la energía que se produce en el entorno del mismo, con independencia de la dinámica marina. Los agujeros de la esfera están conectadas a las tuberías conductoras por una estructura cónica para permitir la captura de un volumen mayor de agua y en el otro extremo del tubo conductor una boquilla se conecta con una turbina que permite el aumento de la presión ejercida por el agua. El tubo conductor a su vez tiene en ella un pivote o émbolo en movimiento de acuerdo con la presión ejercida por la dinámica marina
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The exploitation of marine energy, both through the movement of currents and through the impact generated by waves, is a field which has given rise to various inventions relating to the way in which the movement is transformed into electric energy.
  
  Generally, mechanisms are being developed which use the height difference of tides, interposing mobile parts to the natural upward or downward movement, together with mechanisms channelling and depositing the flow to obtain movement in an axis. By means of the coupling thereof to an alternator, the system can be used to generate electricity.
  
  In this sense, various forms of energy generation are known, by means of tidal power stations (for example, La Rance in France), by means of marine turbines consisting of a horizontal flat blade which varies its inclination angle to obtain an upward and downward movement. Developments which attempt to generate energy from the temperature difference in the water by applying the Rankine cycle have also been set forth.
  
  Technologies have been generated for converting air flows, produced by the alternating movement of the sea, through turbines characterized by rotating in a single direction independently of the air flow, or pressurized structures in which the upper part moves with respect to the lower part due to the effect of the waves, producing electric energy through a linear generator, as well as articulated structures having hydraulic attachment nodes acting as electric generators, floats,.. to pressurize the driven air.
  
  However, these devices are not known to be characterized by the development of a marine energy capturing unit like the one set forth in this invention, which allows capturing the energy of marine movement, independently of the dynamics.
  Leer más
O-944Universidad Carlos III de Madrid / España 1223

Solicitar información>> Compartir tecnología>>
Nuevo sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos.

Remote sensors, measures, instrumentation, multisensor, sensors, Control Systems, Traffic Engineering
- Descripción de la oferta tecnológica :
  
  Dos universidades españolas en una colaboración conjunta han desarrollado un sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos, que proporciona el número, el tipo y la velocidad de los vehículos en una carretera. El sistema no es invasivo, ofrece bajo costo, bajo consumo de energía y de fácil instalación, con aplicaciones como la gestión eficaz del tráfico y análisis ambiental.
  Las universidades buscan empresas o entidades públicas para licenciar esta tecnología.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  - Due to its portability, low power and autonomy, installation and operation are simple and need neither disrupt traffic nor require specialized personnel.
  - There are not moving parts, which minimizes damages and wear.
  - It detects and considers the vehicles change lanes
  - Immunization to temperature changes, wind and interference from other sensors
  - Modularity and low cost allow to monitor several lanes
  - Classification of vehicles according to their height and shape Leer más
O-1119MP Lighting Inc / Canadá 1760

Solicitar información>> Compartir tecnología>>
Innovadora tecnología de refrigeración a base de la combinación de disipador de calor y ventilador (sistema de enfriamiento activo)

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics
- Descripción de la oferta tecnológica :
  
  El sistema de refrigeración se ha simplificado extremadamente mediante la conexión de la matriz de termistores directamente en la línea de alimentación del ventilador de tal manera que pueden hacer una doble función al mismo tiempo: sensores de temperatura y de la corriente operacional del ventilador. Podemos proporcionar pequeño tamaño de la matriz mediante el uso de termistores de SMD resistencias térmicas, por lo que podría ser colocado muy cerca del objeto de refrigeración (disipador de calor, etc.) Tampoco se necesita una fuente de alimentación adicional, excepto para el ventilador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The original active cooling system was developed on the base new concept using of matrix of NTC thermistors for thermal management of LED lamp. The NTC thermistor array has been connected directly in the power line of the fan. Being thermally coupled to heat sink of LED lamp and electrically coupled to fan the NTC thermistor array capable to perform double function in the cooling system: changing its resistance by means of changing of temperature of heat sink (acting as temperature sensor) and changing of current through fan by means of changing its resistance (acting as current regulator).
  
  As result the configuration of active cooling system is simplified significantly and its size, weight and cost price have been reduced. This active cooling system was realized as “cooling module” which integrates heat sink, fan and intermediate plate - thermo conductor (with NTC thermistor array inside) for LED’s PCB attaching.
  
  A lot of samples of “cooling module” were prototyped and tested with various kind of LED lamp in the range of output power (10 – 40) Wt and DC fan 12V; 1Wt. Cooling system consumes power no more than (3-6) % of output power of LED lamp and provide thermo regulation of LED’s PCB in LED lamp with accuracy (+/- 5*C) in the range (45-65) *C temperature of LED’s PCB under full load of LED lamp. Leer más
O-1142Draco Systems / España 1161

Solicitar información>> Compartir tecnología>>
A wireless camera solution foTiny Wi-FI HD camera access point: a number of new applications like medical instrumentation, sport devices, security and industrial imaging

Wi-FI HD camera, HD camera, camera, medical instrumentation, sport devices, security, industrial imaging, imaging, video processing, dentist
- Descripción de la oferta tecnológica :
  
  A new small form factor wireless HD color camera with low latency H.264 streaming, hall effect sensor for power on and inductive battery charger has been developed. A wireless camera solution for a number of new applications like medical instrumentation, sport devices, security and industrial imaging.
  
  The company is willing to collaborate with companies from specs definition, design, development and prototype phases to pilot test, integration and manufacturing. Licensing or manufacturing or commercial (Subcontracting & Co-contracting) with Technical Assistance Agreement with companies is sought.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  DRACO SYSTEMS specialized in made-to-measure solutions in image and video processing as well as in systems and sensor control, located in Barcelona, Spain, has developed a wireless camera solution for a number of new applications like medical instrumentation, sport devices, security and industrial imaging.
  
  The camera architecture is based on an ARM9, a hardware video coprocessor, and a Wi-Fi module working at 2.4 & 5 GHz (802.11 a/b/g/n). Furthermore, it contains a 5Mpixel CMOS color sensor, a SDHC card for video recording, and Bluetooth. It is a low power consumption (<3W) device and has an autonomy for 5/6 hours in a compact 40x40x20mm size.
  
  The camera is adaptable to each technology needs. Thanks to its access point capability, its size and its weight, is able to send HD live stream towards mobile phone, tablet or laptop devices where it could be visualized using an standard player such as Mplayer.
  Leer más
O-1136Jagiellonian University / Polonia 1375

Solicitar información>> Compartir tecnología>>
Nuevos catalizadores de óxido para la eliminación de óxidos de nitrógeno procedentes de las fuentes de emisión estacionarias.

heat plants, emissions management, emission sources, catalysts, nitrogen oxides, oxide catalysts, power plants, waste incinerators, boilers, diesel engines, reactors, air pollutants, air pollution, greenhouse gases, Greenhouse, carbon particles, fuel combustion, acid rains, power, waste, chemical
- Descripción de la oferta tecnológica :
  
  El objeto de esta oferta se refiere a nuevos catalizadores de óxido para la eliminación de óxidos de nitrógeno, partículas de carbono y polvo inorgánico procedente de los gases de escape en el reactor que fue diseñado para este propósito. Pueden ser aplicable en CHP ("combined heat and power plants"), las plantas de ácido nítrico, incineradoras de residuos, motores o calderas de pequeño y mediano tamaño.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The experiments carried out with the assistance of these catalysts showed a high conversion efficiency of nitric oxide to nitrogen at relatively low temperatures – up to 100%. Designed reactor allows the direct removal of nitric oxide from the exhaust gases via the efficient decomposition of nitric oxide and, at the same time, systematic removal of carbon particles and other solid particles.
  Leer más
O-942Universidad Carlos III de Madrid / España 892

Solicitar información>> Compartir tecnología>>
Cable conector blindado para medir la impedancia de la superficie de transferencia.

Electrical Technology measurements, analysis, Methods testing, Avionics, aeronautical, Broadband
- Descripción de la oferta tecnológica :
  
  El grupo de investigación de Sistemas de Potencia Electrónica (GSEP) de la Universidad Carlos III de Madrid ha desarrollado un nuevo tipo de conector con conexión impedancia muy baja, lo cual es aplicable en las pruebas de medición de impedancia de superficie de transferencia de cables apantallados. Estas pruebas son especialmente necesarias cuando los requisitos técnicos son altos, tales como la industria aeronáutica.
  
  El conector tiene dos ventajas principales sobre los conectores convencionales, reduce significativamente el tiempo necesario para preparar la configuración de medición y es adaptable a una amplia gama de diámetros sin distorsionar el blindaje del cable blindado.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Quality control of shields involves preparing samples where the cable end connections should not distort measurements. Preparing these samples requires a very significant manual effort and great skill. The developed solution improves the quality of connections and it reduces drastically the total required time.
  
  The developed connector gets the proper shielding to carry out tests on the test bench by Line Injection Method, according to the CENELEC EN 60512-23-3:2001 or IEC 62153-4-6. It presents two main advantages over conventional connectors:
  - It reduces significantly the time needed to prepare the measurement configuration
  - It can handle a wide range of diameters without distorting the shield of the cable Leer más
O-1030AMIC, Environmental and Industrial Applications of Catalysis / España 1725

Solicitar información>> Compartir tecnología>>
Hidracot, eliminación de materia orgánica (oxidación avanzada catalítica, DQO <5,000 ppm)

catalytic advanced oxidation, catalytic oxidation, organic matter removal, Water, catalytic reactions, effluents, industrial effluent treatment, wastewater, sewage
- Descripción de la oferta tecnológica :
  
  La fórmula química del catalizador diseñado por los investigadores de la Universidad Rovira i Virgili, es la clave del proceso.
  
  La reacción se lleva a cabo en fase líquida en un reactor catalítico, donde el agua contaminada y el peróxido de hidrógeno reaccionan con el ozono, obteniendo agua potable y CO2 como productos.
  El peróxido de hidrógeno se genera in situ en el reactor catalítico por reacción directa entre el oxígeno y el hidrógeno evitando los riesgos de manipulación del operador.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Catalytic Advanced Oxidation technology removes the organic matter at atmospheric pressure and mild reaction temperatures (< 60 ºC) getting clean and reusable water.
  
  It is a simple process that uses very mild operating conditions and does not require complex systems.
  
  It is a clean technology, and does not generate waste or by-products, with low power consumption and small space requirements compared to biological treatments.
  
  The organic pollutants are oxidized to CO2 gas obtaining conversion values around 99%. Leer más
O-92MICROSENS S.A. / Suiza 1814

Solicitar información>> Compartir tecnología>>
Chemical Sensors Technology: Integrated Gas Sensors / Integrated pH and Ion Selective Sensors

Environment control (air & water), food safety, medical diagnosis, semiconductor gas sensors, micro-capteurs, Micosensors, Integrated Gas sensors, Integrated Ion Sensitive devices, Chemical Detection Microsystems
- Descripción de la oferta tecnológica :
  
  Chemical Sensing Microsystems for various applications such as Environment control: Air & Water safety and quality, Food safety and quality control and Medical diagnosis applications
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  GENERAL DESCRIPTION
  
  • Integrated semiconductor gas sensors are manufactured using standard microelectronic technology and silicon micromachining techniques.
  
  • The measurement of specific oxidizing or reducing gases is based on reversible conductivity change of the sensing element.
  
  • The batch fabrication process of miniaturized gas sensors presents the advantages of low cost, reproducibility, small size and low power consumption.
  
  • The package and the mode of operation illustrated in this document target the detection of reducing gases such as carbon monoxide (CO), hydrocarbons (HC), ethanol, and volatile organic compounds (VOC).
  
  • The MSGS-3000 structure consists of a thin-film, doped tin-oxide (SnO2) layer over an embedded heater layer. This integrated heater allows toraise the sensitive layer temperature which is necessary in order that Chemisorption /Reaction mechanisms occur. These mechanisms change the sensitive layer resistance by reversible electron charge transfer from surface states to the conduction band.
  
  ________________________________________________________________________________________
  Ion Sensitive Field Effect transistors MSFET 3300
  Ion Sensitive Field Effect Transistors MSFET 3330 - ISFET Probe - Preliminary specification note:
  Sensor Type: pH- ISFET - Ion Sensitive Field-Effect Transistor
  Gate material: Ta2O5
  Dimensions of encapsulated probe:
  typical Dimensions:
  ISFET Probe
  Length (mm) 50
  Width (mm) 6
  Thickness (mm) 1.0 -2.0
  
  Ref Electrode :
  - Diameter 2mm; length 13 cm proposed for assembling with ISFET PCB
  
  Leer más
O-1054Advanced Alternative Energy Corporation / Estados Unidos 3964

Solicitar información>> Compartir tecnología>>
New technology for conversion of low-value biomass to higher value end products

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid
- Descripción de la oferta tecnológica :
  
  A scalable and multifaceted energy and fuels processing technology providing for conversion of diverse low-value biomass, by products and wastes to higher value energy products has been invented, patented and developed. The technology is highly adaptive and the processes available are high yielding.
  
  An industrial, SME, larger company, or institutional or academic partner is sought for pursuing the joint venture development of various applications of this universal cleaner energy technology, and follow on commercialization. The subject technology is also available for licensing and/or joint development and commercialization outside the U.S.A.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Low value biomass is readily available from the many non-edible fractions of various food crops and this resource is widely produced at large scale, and is often found to be locally available and often extremely cheap as it is a by-product that does not require any additional planting, cultivation, harvesting, fertilizer or chemicals for weed and pest control. Thus it is simply a byproduct that is available for conversion along with dedicated fuel crops and municipal wastes to higher value products and is well suited for cleaner low cost sustainable energy production on the farm and/or in nearby communities. Leer más
O-600The Science Park of the of the UC3M / España 1397

Solicitar información>> Compartir tecnología>>
Sistema para la caracterización del tráfico por carretera basado en sensores ultrasónicos.

Traffic Engineering, control systems Sensors, multisensor technology, Urban plannification
- Descripción de la oferta tecnológica :
  
  Dos universidades españolas en una colaboración conjunta han desarrollado un sistema para la caracterización del tráfico por carretera basado en sensores de ultrasonidos, lo que proporciona el número, tipo y velocidad de los vehículos en una carretera. El sistema no es intrusivo, es de bajo coste, bajo consumo de energía y de fácil instalación, con aplicaciones tales como la gestión eficaz del tráfico y análisis del medio ambiente.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The proposed traffic characterization system (SCT) classifies and measures the number of vehicles driving on a road and their speed. The information provided by this system allows a simple and inexpensive traffic characterization that flows through a road of one or more lanes, which can be useful in the traffic analysis to ensure efficient management or the environmental impact generated by the analyzed road, because output data provided by the system are closely related to air and noise pollution associated with road traffic.
  
  The design is ready to be mounted over a bridge, an overpass or in any elevated platform over the road. In this way, the system can be installed and uninstalled easily without stopping the traffic.
  
  The system is ready to characterize multi-lane roads and it consists of several modules, each of them performs detection using an ultrasonic sensor. The characterization of each lane needs to use two modules. On the other hand, the joint characterization of all lanes allows taking into account vehicles that are changing between lanes just at the time of measurements by the sensors, so it avoids false or incorrect readings.
  
  Each measurement module consists of a sensor (transmitter/receiver), a battery and electronics according to the selected data acquisition mode. Moreover, it is also possible to supply power through an external source.
  
  Since the system is designed to characterize traffic, including fast roads, the processing software takes into account the specific difficulties of such roads. For example, the classification of vehicles is not made from their profiles, but it is used the maximum height detected for each vehicle and the statistical spread from the categories previously recorded. However, its main advantage is the calculation of the speed of vehicles.
  
  Innovative aspects:
  
  • Due to its portability, low power and autonomy, installation and operation are simple and need neither disrupt traffic nor require specialized personnel.
  • There are not moving parts, which minimizes damages and wear.
  • It detects and considers the vehicles change lanes
  • Immunization to temperature changes, wind and interference from other sensors
  • Modularity and low cost allow to monitor several lanes
  • Classification of vehicles according to their height and shape Leer más
O-950TELECOCABLE / España 744

Solicitar información>> Compartir tecnología>>
Nuevos GPS en tiempo de sincronización de equipos. GPS en tiempo real V02

SYNCHROPHASORS, IEEE Std C37.118, IRIGB 124/123, IRIGB 004/003, REAL TIME GPS
- Descripción de la oferta tecnológica :
  
  Basado en la tecnología GPS, logramos un reloj de alta precisión que permiten sincronizar los equipos de protección y control en el sector de las subestaciones eléctricas utilizando protocolos estándar.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The high precision and stability of its disciplined oscillator, allows generating IRGB protocol to satisfy rule IEEE Std C37.118 - 2005 (IEEE Standard for Synchrophasors for Power Systems).
  Leer más
O-610AIR PRODUCTS AND CHEMICALS / Estados Unidos 2651

Solicitar información>> Compartir tecnología>>
El líquido de Hidrógeno de almacenamiento tiene 3 veces la densidad de energía de las baterías de ión de litio.

Hydrogen, Storage, Fuel Cell, Fuel, energy
- Descripción de la oferta tecnológica :
  
  Este líquido de hidrógeno de almacenamiento se vierte y se almacena con la comodidad de los combustibles líquidos, sin embargo es tan inflamable como la madera. Almacenando tanto hidrógeno como el hidrógeno licuado en sí, esta tecnología permite que haya productos capaces de ofrecer alta potencia y larga duración para dispositivos electrónicos portátiles, dispositivos especiales, sillas de ruedas, vehículos aéreos no tripulados hasta el almacenamiento de energía a escala de redes.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  This product delivers hydrogen with an extra degree of safety directly to fuel-cells on-demand. New designs are enabled since this "Liquid-Carrier for Hydrogen" is stored in tanks of any shape. The economics of this system have been validated by DOE and is among the least expensive methods of high-volume hydrogen storage. When loaded with hydrogen from renewable sources this technology delivers a complete green solution since the carbon portions of the molecules are completely re-used. With a well-to-wheels efficiency comparable to gasoline or EVs, this technology can deliver world-class efficiency. Leer más
O-1037empresa anónima / Ucrania 1222

Solicitar información>> Compartir tecnología>>
Protección Nuclear con tejido de algodón

nuclear, smart textiles, Nuclear protection, nuclear protection fabric, nuclear power plants, nuclear power, nuclear medicine, oncology, medical devices, millitary
- Descripción de la oferta tecnológica :
  
  La tecnología permite el uso de algodón en el tejido de protección nuclear con mejores características que sus análogos. Los componentes que se utilizan en el tejido de algodón se podrían introducir en masas de plástico como un material de carga, en este caso el indicador de protección se puede aumentar considerablemente. Mi desarrollo se basa en el tratamiento especial de la tela. El desarrollo se ajusta a todos los requisitos necesarios.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Technology allows to use cotton in the nuclear protection fabric with better characteristics then analogues. And the components which are used in the cotton fabric might be introduced into plastic masses as a filler; in this case the protective indicator can be considerably increased. My development is based on the special fabric's treatment. The development conforms to the all necessary requirements. The fabric doesn’t contain lead. Leer más
O-966Rovira i Virgili University (URV) / España 1172

Solicitar información>> Compartir tecnología>>
Equipo de medida en tiempo real de la radiactividad ambiental mediante espectrometría gamma sobre filtro de partículas.

airborne radioactivity monitoring, environmental, nuclear power, isotopic activity quantification
- Descripción de la oferta tecnológica :
  
  Se ha desarrollado un equipo de medida en tiempo real de la radiactividad ambiental mediante espectrometría gamma sobre filtro de partículas (referido como RARM-F, por sus siglas en inglés). El equipo RARM-F posibilita la identificación y la cuantificación, en tiempo real, del contenido radiactivo ambiental, que puede ser interés alrededor de industrias con actividades nucleares o radiactivas.
  
  El equipo RARM-F recolecta un flujo de aire constante que pasa a través de un filtro de partículas, donde se recogen los aerosoles contenidos en el aire. Entonces, el filtro se encara a un detector de radiación que se utiliza para espectrometría gamma. Esto permite la identificación y cuantificación de los isótopos radiactivos en el ambiente en tiempo real. La identificación de los distintos isótopos permite distinguir incrementos de los niveles de radiactividad debidos a causas naturales de aquéllos de origen artificial. Además, la cuantificación de los isótopos radiactivos presentes en el aire permite el establecimiento de niveles de aviso automatizados basados en los valores de los datos radiológicos obtenidos. También es posible establecer avisos automáticos relacionados con distintos parámetros de funcionamiento del equipo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The RARM-F is composed by one scintillation detector shielded with a lead shielding. The use of a filter to retain and concentrate the airborne particles together with the lead shielding makes possible lower detection limits than those obtained by direct measurement.
  
  Besides, the geometry of the sample is always the same, i.e. the air flux is always homogenously distributed in a circle 45 mm in diameter filter and the distance between the filter and the detector is always the same. Thus, the efficiency calibration can be more accurate, which permits better isotopic activity quantification.
  Leer más
O-1068Laser Consult Ltd / Hungr 609

Solicitar información>> Compartir tecnología>>
Filtros de salida de gases que utilizan la tecnología de espuma de revestimiento

foam coating filters, combustion gas, combustion, exhaust gas, air pollution, foam coating, power station, filters
- Descripción de la oferta tecnológica :
  
  Nuestro socio, una empresa coreana ha desarrollado una nueva tecnología de filtro de medios. El cliente está buscando socios comerciales para un Acuerdo Comercial y ulterior desarrollo común.
  En el entorno industrial, el polvo que causa la contaminación del aire se emite durante el proceso de combustión. Comúnmente se utiliza un sistema de filtración de profundidad para filtrar el polvo. Nuestra tecnología difiere de las aplicaciones actuales, ya que utiliza el sistema de superficie de filtración. Por lo tanto, este filtro de recubrimiento de espuma es excelente para la eliminación de polvo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The Korean company has developed a foam coating filter. Its pore size is under 30㎛ and filters the dust which is produced from combustion process. It provides cost effective operation by saving more than 40% of existing operational maintenance. The main advantage of this technology is the small pore size and it offers low price compared other foam coating filter products. Leer más
O-965Rovira i Virgili University (URV) / España 1100

Solicitar información>> Compartir tecnología>>
Equipo de medida en tiempo real de la radiactividad ambiental mediante dos detectores de centelleo utilizando medidas directas de espectrometría gamma

airborne radioactivity, airborne radioactivity monitoring, gamma-ray spectrometry, Environmental radioactivity, radioactivity, nuclear facilities, nuclear power, nuclear power plants, radioactive cloud, radioactive deposition, radioactive waste storage, radioactive content of the air, radioactivity levels, nuclear radiation, radiation source, meteorological station, radiation surveillance, isotope production, nuclear research
- Descripción de la oferta tecnológica :
  
  Se ha desarrollado un equipo de medida en tiempo real de la radiactividad ambiental mediante dos detectores de centelleo utilizando medidas directas de espectrometría gamma (referido como RARM-D2, por sus siglas en inglés). El equipo RARM-D2 posibilita la identificación y la cuantificación, en tiempo real, del contenido radiactivo ambiental y puede ser interés para su uso alrededor de industrias con actividades nucleares.
  
  El equipo RARM-D2 incluye dos detectores de centelleo apantallados con plomo, permitiendo la discriminación entre los radioisótopos contenidos en posibles nubes radiactivas provenientes de accidentes y los radioisótopos depositados o precipitados en el suelo. La identificación de los distintos isótopos, empleando la espectrometría gamma, también permite distinguir incrementos de los niveles de radiactividad debidos a causas naturales de aquéllos de origen artificial. Además, la cuantificación de los isótopos radiactivos presentes en el aire permite el establecimiento de niveles de aviso automatizados basados en los valores de los datos radiológicos obtenidos. También es posible establecer avisos automáticos relacionados con distintos parámetros de funcionamiento del equipo.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  The RARM-D2 is composed by two scintillation detectors shielded with lead. Both detectors are located at about 2 meters height. The first one is faced toward the ground and the second one is faced up, both forming a 180º-angle between them. While the lead shielding of the first detector is designed to shield it from the radiation coming from the upper semi-plane, the shielding of the second one is designed to shield the radiation coming from the lower semi-plane.
  
  The separation of the detection space in two semi-planes makes it possible to distinguish the origin of the radiation source (radioactive cloud or radioactive deposition) and enables a more accurate concentration of activity calculation and a better primary characterization of it.
  Leer más
O-922Lathrop Engineering / Estados Unidos 1219

Solicitar información>> Compartir tecnología>>
PCR termociclador automatizado con tapa calentada que se abre para permitir la carga y descarga con el rápido brazo robótico

PCR, Q-PCR, Thermocycler, Lab Automation, Life Sciences, MDx, Molecular Diagnostics, Eng. Prototype
- Descripción de la oferta tecnológica :
  
  El termociclador tiene una distribución del calor rápida y precisa (calentamiento) de ~ 4-5 grados/segundo distribuidas muy uniformemente en toda la superficie con un enfriamiento rápido de ~ 2.5-3.0 grados/segundo.
  
  Sistema se adapta fácilmente a diferentes tipos y tamaños de SBS microplacas. Actualmente, el sistema ha sido diseñado para aceptar 384-pocillos pero es fácilmente adaptable para 96-pocillos. La SBS puede ser adaptada a 1536-pocillos de tamaño, pero requeriría un esfuerzo un poco más grande para asegurar una distribución uniforme de la temperatura. La variación a través de la superficie es mínima ~ 0,2 grados.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  Small, easy to adapt to most any PCR SBS thermocycling plate to fit device. Surface is completely open and as such will enable nearly any automated system to be compatible. Full integration services available and Lathrop can adapt the platform in a number of different ways to match lab automation configurations.
  
  Lathrop is a full-service engineering design firm with deep experiences in all aspects of automation. This system would also be adaptable to automated testing lines for heating small surfaces and mixing processes that require heat.
  
  System is ready to be fully integrated with walk-away robotics systems and has been tested in a prototype. We'd need to determine your heating profiles and other constraints before completing.
  
  RTPCR or QPCR possible but not in current generation of product. Full Optical Engineering Capabilities are available. Leer más
O-1071ALMIDA Ltd. / Bulgaria 2385

Solicitar información>> Compartir tecnología>>
Tratamiento físico del agua y de sistemas basados en agua (fluidos) con aplicaciones muy amplias. Podrían aplicarse individualmente, para el tratamiento previo del agua o para otras tecnologías físicos o químicos para mejorar su desempeño.

Water, water treatment, effluent water, waste water treatment, WWT, irrigation, biofilm, aquaculture, RAS, sugar, food & drinks processing
- Descripción de la oferta tecnológica :
  
  Nuestros productos funcionan con hidro-tratamiento de la onda de agua y fluidos basados en agua. El resultado reduce la tensión superficial, lo que significa mejor (mayor) características disolventes de estos fluidos. El agua (fluidos) son un medio ideal para la aplicación de cualesquiera de otras tecnologías físicas o químicas, que a su vez tiene una aplicación amplia en la industria, la agricultura y en nuestro estilo de vida.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  There are no other similar solutions known. Leer más
O-951TELECOCABLE / España 539

Solicitar información>> Compartir tecnología>>
Sincronización Difusión Equipo TX y RX. "DSINCRO TX, DSINCRO RX

SYNCHROPHASORS, IRIGB 124/123, IRIGB 004/003, TXDSINCRO RX, DSINCRO
- Descripción de la oferta tecnológica :
  
  Estos equipos permiten la difusión de los protocolos de sincronización en el sector de las subestaciones eléctricas de FO o RS485. El TX DSINCRO es responsable de transmitir los protocolos (IRIGB, ASCII, PPS ....) de una fuente de sincronismo (GPS reloj). El RX DSINCRO se encarga de recibir los protocolos emitidos por el TX y entregarlos a los equipos de protección y control.
  
  Compartir tecnología
  
  Aspectos nuevos e innovadores
  
  They let the transmission of synchronization protocols between buildings and relays booths, using multimode optical fiber or twisted pair RS485.
  It allows the utillización of the only source of synchronization for installation.
  
  Leer más

1 2

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en tide power : Oportunidades ... | Ofertas

Innovación en tide power : Oportunidades ... | Ofertas

fuel cells, power production, power, energy, heat recovery, solar power, wind power, waste/energy

The GEI-X5 HTPEM power generation and fuel reforming solution provides customers requiring an efficient, clean with near zero emissions, silent, low maintenance, with fuel flexibility, an affordable pathway for on-board and stationary electric power generation.

technology transfer, IP, technology offer, technology request, patent

Power management system called ® which can be used in medical applications. Intelligent energy management systems, as well as of the intelligent and implantable human diagnostic and therapeutic applications based on such systems.

green technologies, environment, energy, Repowering, offshore, power converter, induction generators, turbines, power plant, wind, wind power, Wind farm

Real Time Systems, equipment;Electronic engineering;Embedded Systems, Electronic circuits, components

transistor, flip, flop circuit, clocked

switching power converter, power converters, voltage-sensing circuit, power management, energy management, battery, batteries, portable devices, energy harvesters, consumer electronics

Smart Meetering, lower power ad-hoc networks, UHF active tag, Fully Integrated RF Module

smart socket, electric grids, domestic electric grids, industrial electric grids, electric power, domestic appliances, industrial appliances, electrical devices, electric engineers, electric engineering

photovoltaic, solar power, solar generator, solar panels, renewable energies, renewable power, solar plants, MPPT, PV, ESC, power electronics, grid-connected generator

Electronics, electromedicine, processing, pervasive, signal

A wireless sensor network based on multiple microdevices that include any sensor needed to measure what we would like (movement, temperature, humidity, flow, fluid density, electrocardiography,...), a microprocessor, and are capable to communicate wireless in real time.

multilevel converters, voltage balance control, electric energy conversion, electric energy, electricity, Electromagnetic, electrochemicals, energy storage, renewable energies, electric motors, electric engineers, electric engineering

renewable energy, tide energy, tide power, marine dynamics

Remote sensors, measures, instrumentation, multisensor, sensors, Control Systems, Traffic Engineering

LED, thermal management, cooling, cooling system, cooling technology, LEDs, LED lamps, Electronics

Wi-FI HD camera, HD camera, camera, medical instrumentation, sport devices, security, industrial imaging, imaging, video processing, dentist

heat plants, emissions management, emission sources, catalysts, nitrogen oxides, oxide catalysts, power plants, waste incinerators, boilers, diesel engines, reactors, air pollutants, air pollution, greenhouse gases, Greenhouse, carbon particles, fuel combustion, acid rains, power, waste, chemical

Electrical Technology measurements, analysis, Methods testing, Avionics, aeronautical, Broadband

catalytic advanced oxidation, catalytic oxidation, organic matter removal, Water, catalytic reactions, effluents, industrial effluent treatment, wastewater, sewage

Environment control (air & water), food safety, medical diagnosis, semiconductor gas sensors, micro-capteurs, Micosensors, Integrated Gas sensors, Integrated Ion Sensitive devices, Chemical Detection Microsystems

Chemical Sensing Microsystems for various applications such as Environment control: Air & Water safety and quality, Food safety and quality control and Medical diagnosis applications

food crops, cleentechies, cleantech, waste, wastes, municipal wastes, biofuels, power, energy, biomass, fuel crops, Green, greentech, feedstocks, bio-products, bio-waste, power, Power Grid

Traffic Engineering, control systems Sensors, multisensor technology, Urban plannification

SYNCHROPHASORS, IEEE Std C37.118, IRIGB 124/123, IRIGB 004/003, REAL TIME GPS

Basado en la tecnología GPS, logramos un reloj de alta precisión que permiten sincronizar los equipos de protección y control en el sector de las subestaciones eléctricas utilizando protocolos estándar.

The high precision and stability of its disciplined oscillator, allows generating IRGB protocol to satisfy rule IEEE Std C37.118 - 2005 (IEEE Standard for Synchrophasors for Power Systems). Leer más

Hydrogen, Storage, Fuel Cell, Fuel, energy

nuclear, smart textiles, Nuclear protection, nuclear protection fabric, nuclear power plants, nuclear power, nuclear medicine, oncology, medical devices, millitary

airborne radioactivity monitoring, environmental, nuclear power, isotopic activity quantification

foam coating filters, combustion gas, combustion, exhaust gas, air pollution, foam coating, power station, filters

PCR, Q-PCR, Thermocycler, Lab Automation, Life Sciences, MDx, Molecular Diagnostics, Eng. Prototype

Water, water treatment, effluent water, waste water treatment, WWT, irrigation, biofilm, aquaculture, RAS, sugar, food & drinks processing

There are no other similar solutions known. Leer más

SYNCHROPHASORS, IRIGB 124/123, IRIGB 004/003, TXDSINCRO RX, DSINCRO

They let the transmission of synchronization protocols between buildings and relays booths, using multimode optical fiber or twisted pair RS485. It allows the utillización of the only source of synchronization for installation. Leer más

Usuario nuevo (registro gratuito)

Usuario registrado

The high precision and stability of its disciplined oscillator, allows generating IRGB protocol to satisfy rule IEEE Std C37.118 - 2005 (IEEE Standard for Synchrophasors for Power Systems).
Leer más

They let the transmission of synchronization protocols between buildings and relays booths, using multimode optical fiber or twisted pair RS485.
It allows the utillización of the only source of synchronization for installation.

Leer más