Innovación en pilot plants production process...

1 2 3 4 5

D-615empresa anónima / Estados Unidos 2966

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologias de seguimiento y diagnóstico para plantas industriales

Industrial Chemical Plants, Monitoring technologies, Fault diagnostics, Predictive Maintenance.
- Resultado deseado
  
  Estamos buscando una plataforma tecnológica impulsada por un software que es capaz de monitorear las plantas industriales o equipos en tiempo real. Este sistema debe ser también capaz de hacer el diagnóstico de fallos.
  
  Empresa multinacional que opera a nivel mundial en los sectores energético y químico con alrededor de 25.000 empleados en todo el mundo
  
  15/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The platfom should be able to use Multivariate and Univariate analysis for monitoring and fault diagnostics of industrial plants and equipments.
  
  It should be capable of performing predictive/preventive maintenance.
  
  The system should be able to monitor real time 24/7 and to send automated email alerts.
  
  The system should be able to monitor continous processes as well as batch processes.
  
  It should be able to automatically acquire, analyze 100s of Variables and visualize them into 3 or 4 MV SQC charts capturing the health of the plant.
  Leer más
D-285empresa anónima / Reino Unido 1151

Envía tu propuesta>> Compartir demanda>>
Technology to allow production of aluminium food & beverage cans with little or no water

aluminium drawing & ironing, waterless systems, closed loop, non-toxic
- Resultado deseado
  
  We are searching for innovative technologies, systems, products and / or materials to allow aluminium food and beverage cans to be manufactured with less or no water requirement. A closed loop system with no toxic waste products would also be considered a significant improvement.
  
  30/11/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Background:
  The production of aluminium cans is capital intensive and involves numerous process steps, many of which require water and / or water-based lubricants, as a cooling agent, and in particular to wash away fines, lubricant residues, etc prior to protecting, coating, filling and sealing. Typically, 15 - 65 gallons of water are required per 1000 cans (differs between individual plants). Our client is looking to drastically reduce this usage by adopting new forming techniques, novel ‘washless’ or waterless lubrication and / or cooling materials or mechanisms, and closed loop systems whereby the water that is used can be cleaned for re-use in the plant.
  
  Problems:
  - The drawing and wall ironing process generates a great deal of heat / friction (aluminium is reduced from gauge of ~0.25mm to ~100microns), hence the need for cutting oil / lubricants and coolants.
  - The cans must be scrupulously clean prior to coating on both sides (to prevent corrosion and allow printing), hence a 4-stage washing process. This includes the use of etching chemicals such as HF.
  - If employing a closed loop system the resulting waste sludge is classified as hazardous due to the aluminium particulates / fines (up to 30 microns) and various chemicals involved in the production process. This is expensive to remove.
  - The manufacturing process uses a number of solvents and other hazardous chemicals which not only contaminate the waste stream but give off toxic emissions meaning the sites on which plants can be placed are restricted.
  
  Solutions:
  Potentially any technology that allows the production of cans without water, or with as little water as possible, will be considered, including:-
  - Alternative forming techniques, e.g. without lubrication / coolant
  - Improved die technology, e.g. coatings for dies / tooling to operate at lower temperatures
  - Alternative cooling systems / mechanisms, e.g. cooling surface of the dies
  - Novel lubrication systems, such as a combined lubricant and coating, which doesn’t need to be washed off, or is water soluble, or can be removed without water (solutions could include pre-coated aluminium and polymer laminates, etc)
  - Waterless or ‘washless’ cleaning systems
  - New coatings / lacquers with ‘cleaner’ chemical content and avoiding use of VOCs
  - Alternative ‘greener’ mechanisms for etching fines from surface of the can (HF is currently used)
  - Water treatment systems that reduce or remove the usage of chemical agents, as well as the aluminium residues, to render the waste non-hazardous and thus potentially recyclable.
  
  Our client does NOT currently use silicon in their production process due to difficulties with contamination – therefore, we prefer not to use a silicone based solution unless it can be shown to not be detrimental to other processes, or could be removed completely from the can / equipment.
  
  The client is an established manufacturer, well used to developing best practice for their production plants. There is an ongoing economic and environmental requirement to reduce the water usage of their plants, and therefore minimise the impact to the local area. Considerable work has already been done to reduce consumption, but the client is looking for step-change technology to create a plant of the future. They are keen to simplify the production process, remove hazardous chemicals and generally create a ‘clean’ process that minimises use of local resources. The company has in-house development capabilities and will consider most forms of commercial collaboration, including licensing, joint development and acquisition. Any technology should have the potential to be scaled for high volume processes Leer más
D-794Parc de Recerca UAB / España 1038

Envía tu propuesta>> Compartir demanda>>
Buscando un socio para el desarrollo de un sistema global de energía y gestión de la producción de plantas industriales

production management, energy management, industrial plants, Software, hardware, Lean manufacturing, Manufacturing, industrial engineers, industrial engineering, industrial processes
- Resultado deseado
  
  Type of Partner Sought: someone who manufactures hardware. The EU partner (SME) has to be directly involved in the hardware side, developing a device capable of taking historical consumption data for each computer you want to analyze and transmit power via software communication protocols:
  - Manufacturer of metering device compatible with PLC
  - API developer of the API
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Tipo de socio buscado: alguien que fabrica hardware.
  
  El socio de la UE (SME) tiene que estar directamente implicado en el hardware, desarrollando una herramienta capaz de tomar los datos históricos de consumo de cada equipo que desea analizar y transmitir energía a través de protocolos de comunicación de software:
  
  - Fabricante de dispositivo de medición compatible con PLC
  - API desarrollador del API Leer más
D-787empresa anónima / Estados Unidos 1316

Envía tu propuesta>> Compartir demanda>>
Buscando nuevos conceptos de modernización o de reabastecimiento de centrales térmicas de carbón con gas natural.

power generation, power station, power plants, power, natural gas, natural gas refueling, gas, Coal, greenhouse gas emissions, renewable fuels
- Resultado deseado
  
  Coal-fired power plants are the dominate source of power generation globally. Due to the environmental and political drivers to reduce greenhouse gas emissions, we are interested in technologies that would enable us to retrofit existing coal-fired power plants for use with cleaner fuels such as natural gas or renewable fuels, while maintaining the nameplate capacity. We are interested in both co-firing with coal or refueling with the cleaner fuel.We would be interested in receiving novel concepts or ideas about retrofitting or refueling coal-fired power plants with natural gas. We are interested in ideas at any level of development, not just concept stage.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Las centrales térmicas de carbón son la fuente de generación de energía que domina a nivel mundial. Debido a los factores medioambientales y políticas para reducir las emisiones de gases de efecto invernadero, estamos interesados en tecnologías que nos permitan adaptar las actuales plantas de carbón de energía para su uso con combustibles más limpios como el gas natural o combustibles renovables, pero manteniendo la capacidad nominal. Estamos interesados tanto en co-combustión con carbón o el reabastecimiento de combustible con un recurso más limpio a nivel medioambiental. Estaríamos interesados en recibir nuevos conceptos o ideas respecto a la instalación o reabastecimiento de combustible de carbón en las plantas de energía con gas natural. Estamos interesados en las ideas, en cualquier nivel de desarrollo, no sólo etapa de concepto. Leer más

Buscador de innovación destacado Air Products and Chemicals

Sobre Air Products and Chemicals

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-632empresa anónima / España 1289

Envía tu propuesta>> Compartir demanda>>
Buscamos proceso de deshidratación de trozos de verduras y carne diferentes a los procesos convencionales (liofilización, secado al vacío, secador de aire)

dehydration, VEGETABLE, meat, process, technology, dry
- Resultado deseado
  
  Any dehydration process different from lyophilization, air dryer, vacuum dryer or other conventional processes. The process must be suitable to vegetable and meat pieces. The process have to preserve the sensorial properties of the vegetable or meat.
  
  Our UE company is specialized in production and commercialization of culinary products in 50 countries on 4 continents, with a turnover about 600 million €, and employing more than 1500 people. Our core products are dehydrated and ambient with some leading trade marks.
  
  05/09/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Cualquier proceso de deshidratación diferente de la liofilización, secado por aire, secado al vacío u otros procesos convencionales. El proceso debe ser adecuado para piezas vegetales y carne. El proceso tiene que conservar las propiedades sensoriales de las verduras o la carne.
  
  Nuestra empresa está especializada en la producción y comercialización de productos culinarios en 50 países de 4 continentes, con una facturación de 600 millones de €, empleamos a más de 1500 personas. Nuestros principales productos son deshidratados y naturales, con algunas marcas líderes. Leer más
$Buscando mejorar el Shale Gas y la producción de Petróleo a través de los fluidos de fracturación$
D-749empresa anónima / Estados Unidos 2075

Envía tu propuesta>> Compartir demanda>>
Buscando mejorar el Shale Gas y la producción de Petróleo a través de los fluidos de fracturación

gas, natural gas, shale gas, oil, oil production, hydraulic fracturing, fracturing operations, fracturing fluids, fracturing fluid, fluids, fluid, hydrocarbon production, proppants, chemical additives, nitrogen, Carbon Dioxide, Surfactants, viscoelastic surfactants, biocides, chemical technologies, well stimulation materials, chemical engineering, petroleum engineering, geosystems, geosystems engineering, mines
- Resultado deseado
  
  We are seeking a fracturing fluid that improves the production of natural gas and oil, which is non-damaging, enhances hydrocarbon production, reduces water usage, reduces chemical loading, and reduces the environmental impact of fracturing operations. We are particularly interested in solutions related to chemical additives and proppants that are suited to nitrogen and carbon dioxide based fluids. The desired characteristics include excellent fluid stability, ability to operate at high temperatures, improved flowback characteristics to aid rapid cleanup, and enhanced production. We are interested in any type of collaboration from a research contract to joint development or licensing of technology.
  
  Multi billion revenue multinational company operating globally in the energy and chemical sectors with around 25000 employees worldwide.
  
  15/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando un fluido de fracturación que mejora la producción de gas natural y petróleo, que no sea perjudicial, que mejore la producción de hidrocarburos, que reduzca el uso de agua, que reduzca la carga química, y que reduzca el impacto medioambiental de las operaciones de fracturación. Estamos particularmente interesados en las soluciones relacionadas con los aditivos químicos y apuntalantes que se adaptan a nitrógeno y a dióxido de carbono a base de líquidos. Las características deseadas incluyen la estabilidad del fluido, la capacidad de funcionar a altas temperaturas, las características mejoradas de contra flujo para ayudar a la limpieza rápida, y la producción mejorada. Estamos interesados en cualquier tipo de colaboración a partir de un contrato de investigación para el desarrollo conjunto o licencia de tecnología. Leer más
D-736empresa anónima / Italia 1978

Envía tu propuesta>> Compartir demanda>>
Buscando un producto/proceso/formulación innovador que permita la producción de grasas sólidas, semi-sólidas y líquidas sin aceite de palmera o coco en la formulación

fat/s, fat technology, Bakery, palm oil, coconut oil, saturated fatty acids, fat based fillings, spreadable creams, dry breads, food technology
- Resultado deseado
  
  In order to improve the nutritional profile of our product portfolio we would like to reduce the content of saturated fatty acids. To do so, we are looking for substitutes of palm and coconut oils to be used for the production of fat based fillings (i.e. spreadable creams) as well as for the production of dry breads (i.e. crackers, breadsticks, crispbread etc.).
  
  05/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Con el fin de mejorar el perfil nutricional de nuestro portafolio de productos nos gustaría reducir el contenido de ácidos grasos saturados. Para ello, se están buscando sustitutos de aceites de palmera y de coco para ser utilizados para la producción de grasa (es decir, rellenos a base de cremas para untar), así como para la producción de panes secos (galletas, palitos de pan, pan crujiente, etc.) Leer más
D-723empresa anónima / Italia 3430

Envía tu propuesta>> Compartir demanda>>
Buscando un proceso innovador / formulación para incrustar fruta fresca en los productos de panadería blandos (pan / pasteles) con una vida de almacenamiento, en condiciones ambientales, de 45 días

Food, processing, formulation, water migration, edible films, FRUIT, Bread, Cakes
- Resultado deseado
  
  Fresh fruit pieces (no candied), mixed within the dough and oven cooked at 100°C must retain their structure over the process and over a shelf life, at ambient conditions, of 45 days: no or very limited water migration should occur from the fruit piece to the bread/cake crumb and vice versa.
  
  Manufacturer of consumer products, exporting in more than one hundred countries, about 7000 employees, 26 production facilities, with an annual turnover of about 4 billion euros
  
  17/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Las piezas de fruta fresca (no confitada), mezcladas dentro de la pasta y cocinadas a 100 ° C deben conservar su estructura durante el proceso y durante un tiempo de conservación, en condiciones ambientales, de 45 días. No deberia producirese o de forma muy limitada la migración de agua a partir de la fruta a la miga de pan / tarta, y viceversa. Leer más

Buscador de innovación destacado Reckitt Benckiser

Sobre Reckitt Benckiser

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-727G.O. Impulsora, S.A. de C.V. / México 1447

Envía tu propuesta>> Compartir demanda>>
Buscando: Tecnología de bajo costo para la extracción y equipos para la producción de compuestos botánicos activos.

extraccion technology, botanical extracts, botanical compounds, Supercritical fluid extraction, SCFE CO2, botanics
- Resultado deseado
  
  Solutions presented should provide a low investment - low cost operation process technology, equipment sources, and equipment donors (if possible) for an environment friendly. A low-scale extraction operation seeking the production of high purity and quality botanical active compounds suitable for further processing by the culinary and pharmaceutical industries.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Las soluciones presentadas deben proporcionar una baja inversión - una operación de bajo costo en la tecnología, y los equipos facilitados (si es posible) no deben ser dañinos para el medio ambiente. La operación de extracción a pequeña escala que se busca debe dar lugar a la producción de compuestos botánicos activos de alta pureza y calidad adecuados para su transformación por la industrias culinarias y farmacéutica. Leer más
D-7empresa anónima / España 1082

Envía tu propuesta>> Compartir demanda>>
Improvement of the time of drumming process in the manufacturing of solvent urethanes

Urethanes, pneumatic pumps, reactor, packaging, productivity
- Resultado deseado
  
  The aim of this challenge is to improve the productivity of the manufacturing process of solvent urethanes via the reduction of the drumming time of those products. For this, the viscosity is a key factor since its very high ( of 20.000 to 50.000 cps)
  
  30/10/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Currently the packaging of solvent urethanes (10 tone reactors) is made with pneumatic pumps of 3 inch and with nitrogen pressure in the reactor. The packaging time is of 5 to 7 hours, during this time the reactors can not be used. The reduction of those times would improve the productivity since the reactor would be free in less time, ready to start a new reaction. Leer más
D-734empresa anónima / Reino Unido 1251

Envía tu propuesta>> Compartir demanda>>
Buscando: nuevas tecnologías de análisis de gases para reemplazar los procesos de cromatografía de gases para la industria de procesamiento de hidrocarburos (HPI)

gas, analysis, chromatography, cascade laser, raman spectroscopy, hydrocarbon processing
- Resultado deseado
  
  We are seeking novel Gas Analysis technologies to replace Process Gas Chromatography for the Hydrocarbon Processing Industry (HPI). Any proposed solution must be robust (i.e. suitable for on line analysis) and allow for multicomponent analysis. Cost per component is also a key factor. Two types of gas analysis have been identified as offering a potential solution:
  
  Mid IR Cascade Laser methodology
  Raman spectroscopy
  
  01/05/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando nuevas tecnologías de análisis de gases para reemplazar los procesos de cromatografía de gases para la industria de procesamiento de hidrocarburos (HPI). Cualquier solución propuesta debe ser robusta (es decir, adecuada para análisis en línea) y permitir el análisis de componentes múltiples. El coste por componente es también un factor clave. Han sido identificados dos tipos de análisis de gases que ofrecen una solución potencial:
  
  Mediados IR láser de cascada metodología y espectroscopia Raman. Leer más
D-159empresa anónima / Estados Unidos 1211

Envía tu propuesta>> Compartir demanda>>
Colourless Anti-Reflective and Ultraviolet Blocking Coating at Low Cost

anti-reflective, coating, ultraviolet
- Resultado deseado
  
  This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs.
  
  21/07/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs. The key challenge with existing combined AR/UV coatings is the non colourless appearance that results from the two UV and AR layers, hence a third layer of coating is added on top to compensate for the colouring. This makes the process capital intensive and increases the expense significantly. Ideally a solution would be a two layer based AR/UV coating or a completely new system. Alternatively a UV coated glass that can withstand high temperatures and resist damage during the AR layer curing process would also be of interest.
  
  The combined functionality coating can be organic or inorganic or a combination of both.
  
  The coatings need to be applied successfully to glass substrates and fulfill the following technical requirements:
  
  o UV blocking in wavelength region 300-380nm
  
  o High AR transmission - Mean transmission in region 425-675nm:
  
  o Low reflection in region 425-675nm
  
  o The coating needs to be optically transparent. Transmission color: neutral/colorless
  
  o Scratch resistant; cleanable
  
  o Coating should be resistant to high temp: 400C and above
  
  Field Of Use and Intended Application
  The wet coating technology will be applied on glass.
  
  Desired Outcome
  Successful technologies will be able to be applied in a wet form to glass, have combined AR and UV functionality as per required parameters, with no tint in the end coating.
  
  Comments
  This company is looking for coating technologies that offer the combined AR/UV functionality at low cost. They are open to a variety of solutions.
  
  Leer más

Buscador de innovación destacado FLUIDRA

Sobre FLUIDRA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-650empresa anónima / Reino Unido 929

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías o procesos que permitan la rápida eliminación de "sacrificial ceramic support structure(s)" después de la cocción a mano de la cerámica

ceramic processing, ceramic cutting, finishing hard materials
- Resultado deseado
  
  Nuestro cliente está especializo en la fabricación de sanitarios y fregaderos / escurridores de cerámica hechos a mano. El proceso de fabricación consiste en verter arcilla refractaria fina en un molde, insertar piezas de moldeo para producir una forma compleja en 3D, seguido de varias etapas de secado, esmaltado, cocción y rrecorte. Este proceso de recorte consisite en eliminar una parte significativa de cerámica que se utiliza para equilibrar la carga térmica, minimizar la distorsión y proporcionar soporte estructural, mientras la pieza se cuece en un horno.
  
  Nuestro cliente está buscando activamente una tecnología, producto o proceso que permita la producción más rápida, segura y/o más barata de artículos de cerámica mientras manteniendo la misma calidad de acabados. Soluciones pueden venir investigadores, de empresas con conocimientos del proceso de fabricación de cerámica, de industrias de corte y acabado de materiales duros, o empresas con maquinaria de procesamiento o consumibles.
  
  26/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The client can use a combination of handheld cutting tool, CNC machine or robotic cutting tool and grinding mechanisms to finish the piece. Whilst the automated processes can be used, they require extensive initial capital outlay, can take more time to use for a varying selection of sizes and do not provide the same high quality, hand-finished product for which our client is known.The handheld tools allow a quicker changeover for products, but are labour intensive, involving health and safety risks and can be costly in terms of blade costs.
  
  Solutions could come from academia, companies with an understanding of ceramic forming/processing, industries cutting or finishing hard materials, or companies with processing machinery or consumables, and include:-
  
  - Innovative ways to support the piece in the kiln and balance the thermal loading (therefore negating the need for the ‘lost part’)
  - Innovative cutting technology for fired ceramics or other hard materials (e.g. ultrasonic, water-jet, laser, ‘hot-wire’ etc)
  - Step-change in blade technology for angle grinder
  - Sacrificial materials / moulding components to create void for easier ‘break-off’
  - Additives, meshes, fillers, etc that can react to stimulus and replace cutting of ceramic
  - 2-step moulding and glazing process to allow piece to be ‘built up’
  - Innovative joining technology for ceramics or materials that are moulded or fired
  - Innovative ceramic forming technology
  
  Preferred solutions should ideally be:
  
  - Low capital outlay cost
  - Small manufacturing footprint
  - Minimal emissions / effluent
  - Quick (matter of minutes or less)
  - Robust enough to survive prolonged high temperature firing cycle (1200°C for 12-24 hours)
  - Allow the expected shrinkage of ceramic during firing
  
  Our client is a European manufacturer of high-quality ceramic products, known for their excellent design and guaranteed performance. The company has significant expertise in design and manufacturing and is keen to locate innovative technology or products that will improve their existing production process.They are willing to consider all types of potential collaboration. Leer más
D-590empresa anónima / Italia 1626

Envía tu propuesta>> Compartir demanda>>
Buscamos procesos / fórmulas innovadoras para hacer pasta de cocción rápida

Food, processing, formulation, extrusion, drying, fast cooking
- Resultado deseado
  
  El tiempo de cocción debe reducirse al menos un 70% en comparación con la forma de referencia (es decir, Penne, el tiempo de cocción estándar es de 11min ==> nuevo tiempo de cocción 3-4 min);
  
  Fabricante de productos de consumo, exportamos a más de un centenar de países, alrededor de 7000 empleados, 26 plantas de producción, con una facturación anual de cerca de 4 billones de euros. Estamos fuertemente comprometidos con la innovación, así como con la calidad de nuestros productos.
  
  11/07/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Cooking time must be reduced by at least 70% versus the reference shape (i.e. Penne, standard cooking time 11min ==> new cooking time 3-4 min);
  
  The thickness of the dry product must be the same as that of the reference shape;
  
  The texture of the cooked product must be comparable to that of the reference shape;
  
  Ingredients must be suitable for human consumption.
  
  The reduction of cooking time and, eventually of the cooking temperature, represents not only a clear advantage for a "time starving" consumer, but also results in a lower energy consumption of the cooking process, reducing its impact on the environment.
  
  Pasta is currently made by mixing wheat semolina (flour) with water to obtain an homogeneous dough that will be extruded to give the characteristic shape and consistency. This visco-elastic fluid is made by two bio-polymers: starch and proteins (gluten). The product is then dried at temperatures ranging between 60 and 90°C and times ranging from 4 up to 36 hours. The product is consumed after being cooked in boiling water over the cooking time suggested on the package. During cooking, water diffusion occurs, starch is gelatinized (plasticized by water and heat) and proteins coagulated. Leer más
D-3empresa anónima / España 1478

Envía tu propuesta>> Compartir demanda>>
Plastic particles detection system in agro-food product manufacturing

Food, Teflon, Metallic detector, food safety, Plastic
- Resultado deseado
  
  The current challenge’s aim is to develop trustful detection system of plastic particles accidentally generated as the friction result between the plastic surface material (teflon or similar) and the mechanical parts of the production line.
  
  27/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The use of Teflon surfaces is common in the product agro-food manufacturing. The most relevant characteristics offer: high impact absortion capacity, high temperature resistance (200C), good slip properties and prevents food adhesion above all for those which its texture and consistency is sticky. Teflon’s substitution for other metallic materials (mainly stainless steel) has not worked since the food sticks easily provoking incidents in the production line.
  
  In the other hand, due to friction between the plastic surfaces and the mechanical parts of the line, plastic particles are formed which if incorporated in the food generate a risk for the consumer.
  
  When the surface is of metallic origin (Iron, stainless steel), the post of a metallic detector at the end of the line prevents that the contaminated product reaches the consumer. Nevertheless, when the generated particle is of plastic origin the current systems (metallic detectors, X.Ray) do not work.
  
  The objective of the challenge is to find suitable technological solutions that would let to identify plastic fragments (Teflon or similar) that accidentally have been incorporated in the food. The solution may be thought in different levels: some of the possibilities are:
  
  1- To incorporate metallic charge to the plastic polymer (Teflon or similar), so in case of incorporation in the food it will be detected by a conventional metallic detector.
  
  2- Alternative technology that could detect plastic materials in the food product
  
  Tests performed with X-ray technology have not worked, this option is not accepted
  
  Success criteria of winning proposals are:
  
  - Minimal particle size that should detectable: 1mmx3mmm
  
  - The proposed solution must work in a the production line with a production of 1200 units per minute.
  Leer más
$Buscamos fluidos de fracturamiento hidráulico para la recuperación mejorada de "shale gas/oil"$
D-694empresa anónima / Estados Unidos 1383

Envía tu propuesta>> Compartir demanda>>
Buscamos fluidos de fracturamiento hidráulico para la recuperación mejorada de "shale gas/oil"

shale gas, hydraulic fracturing, nitrogen fracturing, carbon dioxide fracturing,
- Resultado deseado
  
  Buscamos tecnologías para "novel fracturing fluids" que puedan utilizarse para la recuperación mejorada de petróleo y gas natural de yacimientos. Soluciones relacionadas con el uso de nitrógeno criogénico y/o dióxido de carbono en los fluidos de fracturación (por ejemplo, espumas de nitrógeno, lodos de nitrógeno) serían particularmente ventajosas. Además, estamos buscando tecnologías que pueden ofrecer una mayor producción comparado con los fluidos de fracturamiento
  
  Compañía multinacional que opera a nivel mundial en los sectores de energía y química con alrededor de 25.000 empleados en todo el mundo.
  
  05/03/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Hydraulic fracturing is of vital importance for the enhanced recovery of oil and natural gas from deep shale formations. During the hydraulic fracturing process, fracturing fluids are used to fracture the shale formations to stimulate and aid the permeation of oil and natural gas from the deep ground to the surface.
  
  Presented solutions for novel hydraulic fracturing fluids should consider the use of compressed gases, increased well production in comparison to other fracturing fluids (e.g. energised fracturing fluids), and environmentally friendliness and disposal of the flow back liquid. Leer más

Buscador de innovación destacado PANRICO SLU

Sobre PANRICO SLU

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-272empresa anónima / Reino Unido 1103

Envía tu propuesta>> Compartir demanda>>
Nitrification inhibition toxicity monitors for the protection of wastewater treatment plants

wastewater; toxicity; monitor; respirometry; development
- Resultado deseado
  
  We are looking for a toxicity-based nitrification inhibition monitor that can be placed at the inlet of a wastewater treatment plant. The monitor should alert when the incoming wastewater has the potential for impacting a nitrifying wastewater treatment plant, and must be sensitive to a wide range of chemicals, including but not limited to athyllurea, phenols, metals, cyanide, benzene, and mecoprop. The monitor must be able to cope with the harsh environment of raw (unscreened) wastewater.
  
  16/12/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  The monitor must be:
  - Sensitive to a broad range of pollutants, including but not limited to
  - Able to provide a response that is related in proportion and form to the expected response from the nitrifying population in a sewage treatment works
  - Able to reliably and consistently detect potential polluted streams
  - Online, or adaptable to an online operation (i.e., installed at sewage treatment works for continuous monitoring of wastewater)
  - Capable of producing a response in a short time frame (< 30 minutes)
  - Robust to withstand the environment of untreated, raw sewage.
  
  The monitors can be of any type (respirometric, sensor-based, etc) provided they can reliably detect polluted waste streams that can impact nitrification processes at the sewage treatment works.
  The challenge is also open to technologies at the proof of concept stage.
  Leer más
D-6empresa anónima / España 1004

Envía tu propuesta>> Compartir demanda>>
Energy efficiency in centralized buildings: solar-housing-floor information flow.

Energy efficiency, energy management, photovoltaic, solar energy, buildings
- Resultado deseado
  
  Our informatics’ product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energy efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  15/08/09 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our informatics product allows knowing in each moment the operation and the state of a building with centralized energy production. We wish to improve the energetic efficiency of the building using the information that we have of the housings, the production plant, and the solar panel and to make interact them together aiming to get a more efficient global work. We need therefore proposals from experts in buildings energy efficiency.
  
  We have information of the three areas (temperature, flows, etc) and all the information that we need of the system and /or the environment, but this information is only collected and the three areas are maintained independently, flow within them does not exist.
  
  Our system telemanages 12 centralized buildings, with a remote control system in real time and with an alert intelligent system. Currently there is a single interaction within the three basic areas: the heating demand in the building (number of flats that are demanding heating simultaneously) is used to have a more reliable control of the boiler, this allows saving energy (reducing the potency of the boiler) when the demand is low.
  
  We believe that the yield of the building can be improved if the three areas work and interact together: Could the solar panel information be useful for the production plant? We therefore wish to receive proposals of experts in energy management that could provide us with the knowledge of how to use the information we have, how to modify the behaviour (the control) of an area taking into account the acquired values in other areas, etc… in order to improve the yield of the building.
  
  The success of the received proposals will be evaluated comparing the yield with or without the interaction between areas.
  Leer más
D-775empresa anónima / Reino Unido 1300

Envía tu propuesta>> Compartir demanda>>
Buscando tecnologías eficaces para prevenir la evaporación o convertir en residuos no peligrosos los vapores de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol).

2-Pyrrolidone, 2-Methyl-1, 3-propanediol, chemical waste, harmless waste, industrial waste, waste management, chemical plants, Chemistry, encapsulation of vapours, binding of vapours
- Resultado deseado
  
  We are actively seeking an effective means to prevent the evaporation of - or otherwise convert into non-hazardous waste – certain vapors given off during a manufacturing process. These vapors are of the compounds 2-Pyrrolidone (2P) and 2-Methyl-1,3-propanediol (MP Diol).
  
  09/04/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando activamente un medio eficaz para prevenir la evaporación o convertir en residuos no peligrosos - ciertos vapores emitidos durante el proceso de fabricación. Estos vapores son los compuestos de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol). Leer más
D-451empresa anónima / España 1925

Envía tu propuesta>> Compartir demanda>>
Buscamos sustrato de celulosa que tenga afinidad para retener colorantes

cationic surfactants, cationic polymers, crosslinkers, cellulosic substrat
- Resultado deseado
  
  Tratamiento de un substrat de celulosa con un ingrediente, concretamente un compuesto catiónico, con el objetivo de que el sustrato con la superficie cationizada tenga afinidad a la carga negativa de un colorante que estaria presente en un proceso de lavado.
  
  12/11/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  It is important to consider that in the laundry process there is the presence of surfactants, so the cationized substrat of celulose has to be "resistent" to surfactants and to maintain the properties during all the washing process. The cationized cellulosic has to work under conditions with and without detergent Leer más

Buscador de innovación destacado COPCISA

Sobre COPCISA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-531empresa anónima / España 1767

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías para mejorar la productividad y la eficiencia de los procesos de producción de biocombustibles

biofuel, biomass, energy, algae, urban waste, energy crop, fungi, yeast
- Resultado deseado
  
  Estamos interesados en la mejora de la productividad y la eficiencia de los procesos de producción de biocombustibles (centrados en la producción de más alta densidad de energía y una mejor capacidad de procesamiento) por medio de la modificación del agente para mejorar la calidad de materia prima. También estamos interesados en nuevos procesos para transformar la biomasa en productos energéticos con un mejor rendimiento y eficiencia.
  
  Estamos en busca de partners que trabajan en los campos de la bioenergía y la tecnología de biocombustibles y que tengan sus proyectos en diferentes etapas de desarrollo
  
  27/05/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are interested in all the developments that will help us improve the energy density and the procesibilidad of biomass in its transformation to biofuel. Also we are interested in all kinds of raw material, from algae, until waste urban or agricultural, passing through energy crops.
  
  On the improvement of manufacturing processes we are interested in fungi, yeasts and bacteria, among others. The final products obtained in investigations can be improved raw material, intermediate materials and/or final product.
  
  Also, we are specially interested in all those organizations with a pilot plant in operation where we can perform research projects.
  Leer más
D-636empresa anónima / España 2990

Envía tu propuesta>> Compartir demanda>>
Buscamos un material flexible (papel) con propiedades de sellado y resistente a la grasa que no afecten a la capacidad de reciclaje del papel

packaging, pack, bag, paper, sealable, sealing, seal, grease-proof, grease, recyclable, recycling, recycle
- Resultado deseado
  
  Los materiales / tecnologías que se propongan deben cumplir con los siguientes requisitos:
  
  - El material de base tiene que ser papel
  - Cualquier aditivo añadido al papel no perjudica su capacidad de reciclado completo
  - El material debe ser resistente a la grasa
  - El material debe ser hermético (condiciones de calor o frío)
  - El sellado obtenido debe ser hermético
  - El material es fácilmente convertible en una máquina de fabricación de bolsas estándar
  - El material cumple con todas las regulaciones de la UE en términos de contacto con los alimentos y la gestión de residuos.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Current paper-based bags are not sealable unless a plastic material is used in their composition. In most of the cases, a polyethylene material is extruded on top of the paper to allow the heat-sealing.
  
  Future regulations will push in the sense of more eco-friendly packaging. In other words, more recyclability and more packaging made of a single material.
  
  Paper bags cannot be sealed if they are not associated to a plastic layer which makes their recyclability impossible.
  Leer más
D-256empresa anónima / Reino Unido 1135

Envía tu propuesta>> Compartir demanda>>
To reduce flavour volatile loss from food ingedients during microwave / hot air drying / cooking

Food, flavour, volatiles, ingredients, microwave
- Resultado deseado
  
  We are seeking ingredient and/or process technology to reduce the loss of flavour volatiles from ingredients in a snack food base during manufacture (drying / cooking). The snack food base contains fresh cooked potato with other ingredients such as vegetables, spices, herbs, legumes, dairy, non-meat protein. Whilst some cooked flavours are created in the cooking process through maillard type reactions, other flavour volatiles are lost (e.g. terpenes).
  
  30/07/10 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  We are URGENTLY seeking ingredient and/or process technology to reduce the loss of flavour volatiles from ingredients in a snack food base during manufacture (drying / cooking).
  Ingredients:
  The snack food base contains fresh cooked potato with other ingredients such as vegetables, spices, herbs, legumes, dairy, non-meat protein. Whilst some cooked flavours are created in the cooking process through maillard type reactions, other flavour volatiles are lost (e.g. terpenes). Examples of ingredients known to readily lose flavour volatiles include:-
  Delicate herbs (e.g. rosemary, thyme) Fragrant spices (e.g. lemongrass, cinnamon etc) Other volatiles may include Aldehydes, Alcohols, Esters, Ketones & Phenolics
  Processes:
  The freshly cooked potato is mashed and then blended with a combination of wet and dry ingredients, plus oil, into a fresh dough mixture that is shaped and deposited onto a conveyor belt. It then moves through the cooking processes:-
  1st stage - Atmospheric microwave dryer
  - Rapid dry at low temperature to create the texture of the product
  - Moisture content is reduced from 65-85% to ~15% moisture within 120 seconds
  - Monolayer of product on belt
  - Hot air (50C) blown across product to remove moisture generated by process
  - Product temperature is between 100-120C
  2nd stage - Hot air dryer
  - Hot air (~120C) dryer to complete cooking process
  - Moisture content further reduced from ~15% to 2% moisture content in around 20 minutes
  - Product deep bedded at 10cm depth
  
  Current causes of flavour volatile loss:
  The majority of flavour volatiles of relevance for a positive consumer experience are lost during the 1st stage of drying. Mechanisms of loss include:
  (i) co-distillation through steam generation (Hypothesis)
  (ii) heat degradation (e.g. flash-off at a certain temperature or time-temperature)
  
  Potential solutions
  - Rapid, on-line analytical methodologies which can identify and quantify the lost flavour volatiles,
  e.g. by sampling the oven exhaust streams online, and / or providing feedback control
  - Addition of ingredients (wet or dry) to the snack base at the “ingredient addition & mixing” step which directly or indirectly impact retention of flavour volatiles - process aid or declarable ingredient as long as not perceived as artificial
  o Can be sacrificial (i.e. not present or changed in finished product)
  o Can reduce reaction rates of volatile loss.
  We are searching for devices, methods, chemistry or physics relating to reduction of consumer-relevant flavour volatile loss during rapid dehydration of a potato-based composite snack.
  Leer más
D-780empresa anónima / Reino Unido 2914

Envía tu propuesta>> Compartir demanda>>
Se buscan: materiales y/o procesos que permitan el mantenimiento/reducción de la temperatura de los líquidos en recipientes metálicos o de vidrio

metal containers, glass containers, glass bottles, metal cans, packaging, Beverage, beverages, aerogels, cooling hydrogels, foaming polymers, Coatings
- Resultado deseado
  
  A material that can be applied via printing to ensure the temperature of the beverage is kept below 10 degrees whilst being consumed.
  
  We are seeking material and process technologies that will insulate against heat gain or actively reduce temperature of liquids contained in glass bottles or metal cans. Solutions (e.g. phase change/insulation materials etc) that can easily be coated on to the inside or outside of the bottle or cans on a fast moving production line, whilst ensuring the premium look of the end product, would be of interest. Processes that enable the printing, coating, spraying of thick foam like or phase change materials are also of interest.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Un material que pueda ser aplicado a través de la impresión para asegurar que la temperatura de la bebida se mantenga por debajo de 10 grados, mientras se consume.
  
  Estamos buscando tecnologías de materiales y procesos que evitan el aumento de calor o reducen activamente la temperatura de los líquidos contenidos en botellas de vidrio o latas metálicas. Soluciones (por ejemplo, cambio de fase / materiales de aislamiento etc) que fácilmente puede ser recubierto sobre el interior o exterior de la botella o las latas en una línea de producción en movimiento rápido, garantizando al mismo tiempo el aspecto de primera calidad del producto final. Son también de interés procesos que permitan la impresión, recubrimiento, pulverización de espuma gruesa o materiales de cambio de fase. Leer más

Buscador de innovación destacado Orange R&D Spain

Sobre Orange R&D Spain

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-812empresa anónima / España 628

Envía tu propuesta>> Compartir demanda>>
En busca de tecnologías o procesos para mantener el color característico de la carne durante todo el proceso de calentamiento, sin aditivos.

nitrates, nitrites, additives, heat treatment, myoglobin, pigments, stability, colour, red, meat
- Resultado deseado
  
  A Spain based company is looking for proposals of technologies or processes to maintain the characteristic colour of meat all through the heat process treatment with no additives and therefore allowing to have a clean label.
  We are looking for an alternative solution to nitrite, or indirect sources of nitrite, that allows reddish meat colour after a heat process while maintains a clean label of the product with no E number incorporation. We are not willing to deal with indirect natural sources of nitrites which are rich in nitrates (celery,..) and once incorporated in the product they are transformed into nitrites.
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Una empresa con sede en España está en busca de propuestas de tecnologías o procesos para mantener el color característico de la carne durante todo el proceso de tratamiento térmico, sin aditivos, por lo que permite ser un alimento natural.
  Estamos buscando una solución alternativa a nitrito o fuentes indirectas de nitrito, que permitan mantener el color rojizo de la carne después de un proceso de calor, mientras mantiene la etiqueta de producto natural sin la incorporación de ningún número E. No estamos interesados en fuentes naturales de nitritos que son ricos en nitratos (apio, ..) y que una vez incorporados en el producto se transforman en nitritos. Leer más
D-747empresa anónima / Estados Unidos 1522

Envía tu propuesta>> Compartir demanda>>
Buscando tecnologías para mejorar la economía de la producción de energía a baja temperatura.

power production, power, energy, heat recovery, WHR, Organic Rankine Cycle, ORC, cooling technologies, heat transfer, waste to energy, WTE, hybrid power production, metals, chemical, oil&gas, geothermal, biomass, solar, NG, Coal, Kalina Cycle, Kalex
- Resultado deseado
  
  Seeking innovative approaches to improve the return on investment for installing Waste Heat Recovery (WHR) systems in industrial applications. We are interested in any type of collaboration from research contract, join development, licensing, etc.
  
  Multi billion revenue multinational company operating globally in the energy and chemical sectors with around 25000 employees worldwide.
  
  10/02/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Estamos buscando enfoques innovadores para mejorar el rendimiento de la inversión en la instalación de recuperación de calor residual (WHR) en sistemas de aplicaciones industriales. Estamos interesados en cualquier tipo de colaboración de investigación, de desarrollo, licencias, etc Leer más
D-416empresa anónima / Reino Unido 2740

Envía tu propuesta>> Compartir demanda>>
Demanda tecnológica >> buscamos tecnologías de medición de flujo

gas flow measurement, Positive Displacement, Rotary Inferential, Fluid Oscillatory, Electromagnetic, sensors
- Resultado deseado
  
  Estamos buscando sensores para el "OEM Process Measurament Market" que proporcionen alta fiabilidad y repetibilidad, sean capaces de hacer frente a una amplia gama de velocidades de flujo y sean muy resistentes. Las aplicaciones incluyen, pero no se limitan, a los siguientes sectores: "clinical respiratory", laboratorios de investigación y otros especialidades (por ejemplo, el rendimiento deportivo), así como en petroquímica, producción de gases industriales y procesado UHP de gas. Otros sectores de la medición de procesos como la producción de gas criogénico, proceso químico en fase gaseosa y la producción de hidrógeno son igualmente de interés - de hecho, casi en cualquier lugar donde la precisión es esencial.
  
  28/01/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Nuestro cliente es una empresa multinacional americana, con ventas por valor de varios millones de Dolares, que fabrica sensores, instrumentos y sistemas completos para la medición y análisis de gas para una amplia gama de aplicaciones industriales y comerciales. La compañía se enorgullece de su tradición de innovación y del alto rendimiento de sus productos que cumplen o exceden los requisitos más exigentes. Precisión (hasta ppb) y repetibilidad son ... Leer más
D-651empresa anónima / Reino Unido 1394

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías innovadoras, sistemas y/o materiales para el control de la energía cinética de productos que se mueven a través de procesos de fabricación y llenado de alta velocidad

high speed manufacturing, manage kinetic energy of cans, food and beverage cans
- Resultado deseado
  
  Estamos buscando tecnologías para reducir, gestionar y/o eliminar la energía cinética asociada con el transporte de componentes relativamente delicados a gran velocidad en torno a una planta de fabricación, sin deformación. Nuestro cliente requiere procesar latas de alimentos y bebidas de aluminio y de hojalata, y que sean transportadas durante la producción sin sufrir ningún daño. Los productos son pequeños (cilindro con un diámetro de 40 mm-70 mm y una altura hasta 200 mm) y delgados (grosor de la pared de ~ 100microns), ligeros (<10 g) y tienden a ser ‘bottom-heavy’
  
  26/12/12 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Our client requires aluminium and tin plate food and beverage cans to be conveyed / transported during production without damage. Products are small (cylinder with a diameter 40mm-70mm and a height up to 200mm), thin (wall thickness of ~ 100microns), light-weight (<10g) and tend to be ‘bottom-heavy’ as there is a base, but no lid yet. The cans are moved around the production plant to enable forming, trimming, washing, internal coating, external decoration and lacquering and then eventually palletised for onward to delivery to the beverage manufacturer for filling. A can will travel through approximately 1km of conveying equipment, using a combination of systems – gravity-fed feeders, magnetic-, vacuum- and air- based conveyors.
  As the drive towards sustainability and competitiveness increases, can manufacturers are striving to take weight and cost out of their products - this inevitably leads to thinner cans, which are consequently less robust during the manufacture and filling processes. Combined with increasing production line speeds (machines process up to 2000 cans per minute), existing can handling solutions can be too aggressive, resulting in damage (primarily denting) to the wall, shoulder and base radius of each can.
  
  Damage can occur throughout the manufacturing process including the filling, and palletising and de-palletising steps. Key problem areas are where cans are required to accumulate, change direction or stop, in mass or in single file. Examples include: transition from “mass to single file”; can stops before a single stream process (external decoration or filling); storage areas and the interaction with directional guiding systems, gates and rails.
  
  Solutions could include:-
  
  - Management of transition from “en masse” to “single file” presentation of components
  - Energy management using magnetic, eddy current and linear drive technologies
  - Durable energy/shock absorbing materials – need to withstand 24/7 use and continuous product contact
  - Improved magnetic and air movement technology
  - Use of low friction materials for conveyor components to reduce energy (input and subsequent kinetic energy). Also combined use with high friction materials to provide ‘braking’ areas
  - Alternative materials for conveyor line manufacture – e.g. ceramics, carbon fibre, to enable easier manufacture and assembly of the plant
  - ‘Soft stop’ and buffering technology to slow down and contain products without damage
  - Improved guide rail materials – flexible but rigid (replace existing aluminium / UHMWPE combination)
  - Kinetic energy harvesting for high-speed manufacturing
  - Modelling and simulation software to understand interaction of product and process and optimise product movement
  - Production line control system – managing interaction between machines and conveyor systems and subsequent product flow
  
  We believe the solution, or elements of a solution, currently exist within other materials handling capabilities i.e. outside the can handling fraternity. These could, for example, be found in manufacturing industries such as:- Glassware (laboratory or lighting); Semiconductor; Pharmaceutical; Cigarette and Food. We are also interested in technology from outside the materials handling industry, including the use of advanced materials, robotics, advanced modelling techniques, and crowd control. Leer más

Buscador de innovación destacado CORPORACIÓN ALIMENTARIA PEÑASANTA

Sobre CORPORACIÓN ALIMENTARIA PEÑASANTA

Àreas de interés

Demandas tecnológicas

Política de open innovation

D-824Capri Engineers / India 195

Envía tu propuesta>> Compartir demanda>>
Buscar información sobre una tecnología probada para convertir los residuos plásticos en combustible / Energía Eléctrica

Recycling of Post-consumer waste plastics & Recycling of Plastics, Reverse Pyrolysis, MSW
- Resultado deseado
  
  Should be able to use Waste Plastics (both post-industrial and post-consumer wastes) of all types and grades for this Conversion process. Have plans to start in a small scale to begin with 10-tons/day and later on with a possible tie-up with local councils and Government subsidies to have plant(s) with higher capacity.
  
  A recent study shows that in Chennai, in India, 8 to 10% of 4500-tons of MSW is Waste Plastics.
  A patented technology has been exposed to convert Plastics Waste (MSW) in to low quality Diesel - Reverse Pyrolysis method
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Debe ser capaz de utilizar plásticos de residuos (tanto los residuos post-industriales como los de post-consumo) de todos los tipos y grados en este proceso de conversión. La idea es comenzar a pequeña escala 10-toneladas/día y posteriormente con una posible alianza con los ayuntamientos y las ayudas del gobierno tener una planta (s), con mayor capacidad.
  
  Un estudio reciente muestra que en Chennai, en la India, del 8 al 10% de 4500-toneladas de RSU son de Residuos Plásticos.
  Existe una tecnología patentada para convertir los residuos plásticos (RSU) en diesel de baja calidad - método de pirólisis inversa Leer más
D-667empresa anónima / Estados Unidos 1705

Envía tu propuesta>> Compartir demanda>>
Buscamos tecnologías para el procesado continuo de queso blando

cheese, Continuous Processing, Dairy
- Resultado deseado
  
  Estamos en busca de tecnologías que transformarán la lentitud del proceso tradicional "artesanal" de elaboración de queso blando a un proceso de alta velocidad sin que haya perdidad de ninguno de los atributos de consumo deseados. Los beneficios deseados incluyen "smaller manufacturing footprint", mayor capacidad, mayores rendimientos diarios, una mayor automatización, la reducción de la variabilidad lote a lote, ahorro de costes potenciales, y/o una mejora de la aceptabilidad por parte de los consumidores.
  
  Empresa grande de productos de gran consumo con sede en Estados Unidos, especializada en la elaboración de alimentos y bebidas. Aproximadamente 100 plantas de fabricación en EE.UU y Europa. 25.000 empleados. Sólida inversión en I+D y fuerte apuesta para impulsar la innovación.
  
  13/01/13 - El deadline de esta demanda ha caducado
  
  Compartir demanda
  
  Detalles de la demanda :
  
  Need technologies to allow for continuous processing of soft cheese. Traditional soft cheese manufacturing is a time consuming process utilizing large vats to produce batches with variable quality.
  
  We are looking for technologies that will transform the traditional slow “artisan” process to a high-speed science based process without losing any of the consumer desired attributes. Desired benefits include a smaller manufacturing footprint, higher throughput, higher daily yields, increased automation, reduced batch to batch variability, cost savings potential, and/or improved consumer acceptability.
  
  Solutions should have potential for food applications even if that was not their original intent or purpose. Must have potential to pass FDA approval/inspection and adhere to US food safety legislation.
  Leer más

1 2 3 4 5

5TH NEW PRODUCT DEVELOPMENT AND INNOVATION MANAGEMENT

3rd Annual Alliance Management for Open Innovation in Pharma

XXIV ISPIM Conference, 16-19 June 2013, Helsinki, Finland: Innovating in Global Markets:

The 6th ISPIM Innovation Symposium – Innovation in the Asian Century

Innovación en pilot plants production process... | Demandas

Innovación en pilot plants production process... | Demandas

Industrial Chemical Plants, Monitoring technologies, Fault diagnostics, Predictive Maintenance.

aluminium drawing & ironing, waterless systems, closed loop, non-toxic

We are searching for innovative technologies, systems, products and / or materials to allow aluminium food and beverage cans to be manufactured with less or no water requirement. A closed loop system with no toxic waste products would also be considered a significant improvement.

production management, energy management, industrial plants, Software, hardware, Lean manufacturing, Manufacturing, industrial engineers, industrial engineering, industrial processes

power generation, power station, power plants, power, natural gas, natural gas refueling, gas, Coal, greenhouse gas emissions, renewable fuels

dehydration, VEGETABLE, meat, process, technology, dry

fat/s, fat technology, Bakery, palm oil, coconut oil, saturated fatty acids, fat based fillings, spreadable creams, dry breads, food technology

Food, processing, formulation, water migration, edible films, FRUIT, Bread, Cakes

extraccion technology, botanical extracts, botanical compounds, Supercritical fluid extraction, SCFE CO2, botanics

Urethanes, pneumatic pumps, reactor, packaging, productivity

The aim of this challenge is to improve the productivity of the manufacturing process of solvent urethanes via the reduction of the drumming time of those products. For this, the viscosity is a key factor since its very high ( of 20.000 to 50.000 cps)

gas, analysis, chromatography, cascade laser, raman spectroscopy, hydrocarbon processing

anti-reflective, coating, ultraviolet

This multinational company is seeking new wet coating chemistries that provide excellent combined Anti-reflective (AR) & Ultraviolet (UV) blocking functionality but with low production costs.

ceramic processing, ceramic cutting, finishing hard materials

Food, processing, formulation, extrusion, drying, fast cooking

Food, Teflon, Metallic detector, food safety, Plastic

The current challenge’s aim is to develop trustful detection system of plastic particles accidentally generated as the friction result between the plastic surface material (teflon or similar) and the mechanical parts of the production line.

shale gas, hydraulic fracturing, nitrogen fracturing, carbon dioxide fracturing,

Energy efficiency, energy management, photovoltaic, solar energy, buildings

2-Pyrrolidone, 2-Methyl-1, 3-propanediol, chemical waste, harmless waste, industrial waste, waste management, chemical plants, Chemistry, encapsulation of vapours, binding of vapours

We are actively seeking an effective means to prevent the evaporation of - or otherwise convert into non-hazardous waste – certain vapors given off during a manufacturing process. These vapors are of the compounds 2-Pyrrolidone (2P) and 2-Methyl-1,3-propanediol (MP Diol).

Estamos buscando activamente un medio eficaz para prevenir la evaporación o convertir en residuos no peligrosos - ciertos vapores emitidos durante el proceso de fabricación. Estos vapores son los compuestos de 2-pirrolidona (2P) y 2-metil-1 ,3-propanodiol (MP Diol). Leer más

cationic surfactants, cationic polymers, crosslinkers, cellulosic substrat

Tratamiento de un substrat de celulosa con un ingrediente, concretamente un compuesto catiónico, con el objetivo de que el sustrato con la superficie cationizada tenga afinidad a la carga negativa de un colorante que estaria presente en un proceso de lavado.

biofuel, biomass, energy, algae, urban waste, energy crop, fungi, yeast

packaging, pack, bag, paper, sealable, sealing, seal, grease-proof, grease, recyclable, recycling, recycle

Food, flavour, volatiles, ingredients, microwave

metal containers, glass containers, glass bottles, metal cans, packaging, Beverage, beverages, aerogels, cooling hydrogels, foaming polymers, Coatings

nitrates, nitrites, additives, heat treatment, myoglobin, pigments, stability, colour, red, meat

power production, power, energy, heat recovery, WHR, Organic Rankine Cycle, ORC, cooling technologies, heat transfer, waste to energy, WTE, hybrid power production, metals, chemical, oil&gas, geothermal, biomass, solar, NG, Coal, Kalina Cycle, Kalex

gas flow measurement, Positive Displacement, Rotary Inferential, Fluid Oscillatory, Electromagnetic, sensors

high speed manufacturing, manage kinetic energy of cans, food and beverage cans

Recycling of Post-consumer waste plastics & Recycling of Plastics, Reverse Pyrolysis, MSW

cheese, Continuous Processing, Dairy

Usuario nuevo (registro gratuito)

Usuario registrado